Product Use Instructions
APPLICATION SURFACES
Use for the final removal of inks and certain spray can stains on painted and coated surfaces, plastics, concrete, cinder block, terrazzo, stone, marble, granite and most other surfaces. Do not use for cleaning aluminum or alkali-sensitive surfaces such as polished floors
Removing Ink and Dye Stains:
After removing as much of any graffiti marker as possible, pour a small quantity of FELTPEN FADEOUT (FPFO) into a small bucket and then apply as thickly as possible to the remaining shadows with a nylon brush. When shadows have disappeared, wipe clean with a damp toweling cloth.
On all smooth or porous surfaces including signage, plastics, stone, concrete, granite or marble, you must attempt to remove as much of the graffiti as possible by first applying SENSITIVE SURFACE REMOVER (SSR), in the case of marking pens, or BARE BRICK, STONE AND MASONRY REMOVER (BBSM) in the case of spray can paints.
The time taken to work completely will vary from instantly, to several minutes, to even overnight in some cases.On inks or dyes splashed or thrown onto concrete, brick or porous surfaces etc., it may be necessary to leave FPFO on overnight. When doing this, we suggest applying FPFO as thickly as possible and covering with black plastic. You can tape the plastic to the wall along the three bottom sides first, and then brush on as much FPFO as possible before sealing the top of the bag onto the wall. This will keep the product wetter for longer, as well as prevent anyone from rubbing up against the wall on the affected area.
Occasionally, some markers or spray can paint shadows may not appear to have been affected by FPFO. However, wiping off with a damp cloth in the case of smooth surfaces or pressure cleaning in the case of brick, stone or masonry surfaces can achieve quite surprising results. Do not be concerned if you need to apply this product more than once.
Removing Spray Can Stains:
FELTPEN FADEOUT is extremely beneficial in removing certain spray can stains on porous masonry and concrete. After dissolving as much graffiti as possible with BBSM, an application of FPFO during or after the final rinse will eliminate any remaining pigment or stain in the surface.
This method (which is illustrated in the sequence below) can be used on a variety of spray can colors, however it is especially useful on RED spray cans and ANY color containing red, ie: oranges, pinks, purples and browns. These colors all contain fine red oxide pigments and are the most likely to leave a residual stain. The stain can be easily removed with a generous application of FPFO.
Once FPFO is applied thickly to the stain, the fading process normally takes only a few minutes to less than half an hour, but longer dwell times may be necessary. Fortunately, once you begin to see the stain disappear (even marginally) you can fade the rest, so be patient and reapply FPFO if needed.
DILUTED CLEANING APPLICATIONS
FELTPEN FADEOUT (FPFO) can be used as a high foaming cleaning concentrate with bleaching action when diluted with water.
Dilute with water as follows:
Light soilage 1:100
Regular cleaning 1:20-50
Mold removal: 1:20
Heavy soilage: 1:10
1. Make up desired diluted solution of FPFO.
2. Wash the surface with solution.
3. If surface is rough, scrub the solution in with a nylon brush, try to reach into crevices.
4. Rinse with clean water. Dry or leave it out to dry. To remove oil or grease spots, scuff marks and hard to shift spills, use FELTPEN FADEOUT neat.
TIPS FOR EFFECTIVE USE OF FELTPEN FADEOUT
TIP 1. On painted walls FELTPEN FADEOUT can be applied first to thick feltpen markers without agitating with the brush. Immediately after this, apply SENSITIVE SURFACE REMOVER in the normal manner. The FELTPEN FADEOUT will absorb the dissolved staining inks thus avoiding ghosting.
TIP 2. Any spray can graffiti that changes color when BARE BRICK, STONE AND MASONRY REMOVER is applied, will also be affected by FELTPEN FADEOUT. Many shadows will disappear if FELTPEN FADEOUT is applied during and after BARE BRICK, STONE AND MASONRY GRAFFITI REMOVER application. Remember to look out for subtle changes in colors such as greens turning grayish yellow and reds turning crimson. The effect of this technique can appear to be magic, leaving onlookers totally gobsmacked!
TIP 3. Boot polish markers (recognized by thin drips running down vertically from the ‘tag’) and some posca pens (recognized as chalky–style water based marking pens) are best removed with FELTPEN FADEOUT. Wet the tag first with water, leave for a minute or two, then apply FELTPEN FADEOUT. Either wipe, or pressure wash off depending on the surface type.
SAFETY ISSUES
FELTPEN FADEOUT is corrosive to skin and may produce severe burns if in contact with skin for extended periods. Wear protective gloves, clothing and safety glasses as shown in SDS.
CAUTION
1. Always wear alkali protective gloves, goggles and long sleeve clothing.
2. Always know where water is available in case of a splash.
3. Avoid splashing FELTPEN FADEOUT on clothing as it will bleach / burn holes in cotton and other fabrics.
ENVIRONMENTAL CARE
FPFO is non flammable, phosphate-free and biodegradable. FPFO conforms to all statutory
environmental requirements for graffiti removal including VOC limits. Designed to be fast, effective and non damaging to surfaces. If necessary, water can be collected using a wet vac and disposed of safely. We believe nothing other than rainwater should enter our precious storm water systems.
CAUTION
Before commencing any large scale use, always test first in an inconspicuous area. This product is designed to remove all types of markers and stains, and may have an
unpredictable or even damaging result on certain man-made or stained surfaces. If necessary wait for surface to dry to ensure perfect results.
NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY:
We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommenced herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.
