slip resistant epoxy Archives

Out of stock

Aluminum Oxide Anti-Slip | BROWN | 3 Grit Sizes | Non-Skid Tough Durable Floor

From: $30.00

Adds very tough skid resistance & texture profile to a surface
Epoxy, Polyaspartic, Urethane 2 part Pigmented floor coatings
Does not change physical properties of the coating
Well bonded into the body of the coating
Long lasting for extended anti-slip performance
Excellent in marine environments
High hydrolitic stability
3 grit sizes in Brown Color from 24 grit to 60 grit
Low Cost alternative to white colored aluminum oxide for same level of anti-slip performance

Select options

From: $65.00

Select options

Out of stock

From: $210.00

Adds slip resistant finish to concrete floors
Anti-Microbial prevents growth of micro-organisms
Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
Good for surfaces subject to bare foot traffic
Long 1 - 1.5 hour pot life
Excellent adhesion
Good chemical and abrasion resistance
Wide selection clear plus 20 colors
Water base

Select options

From: $196.00

Select options

From: $131.00

Select options

From: $107.00

Heavy duty non-skid resistance for concrete & steel
Available in regular cure and cold temp formula to 25°F
Designed for wet areas
Meets ADA and OSHA requirements for safe co-efficient of friction (COF) when properly applied
Meets Navy Military Specification Mil-PRF-24667B for Non-Skid Deck Coatings
Excellent adhesion, abrasion and impact resistance
Resistant to grease, oil, salt water, alcohol, detergent, gasoline, hydraulic fluid
Excellent coating for Diamond Plate
Easy to apply, ready to use non-skid coating
Comes in 4 colors

Select options

From: $35.00

Adds very tough skid resistance & texture profile to a surface
Works well with high performance 2 part pigmented floor coatings
Non-reactant – will not interfere with your coatings
Well bonded into the body of the coating
Long lasting for extended anti-slip performance
Cost–effective – highly effective
Non-toxic – inert and natural, crystalline silica levels are less than 1%
Comes in the most popular 36 grit size
Low Cost alternative to white colored aluminum oxide for only slightly less level of anti-slip performance

Select options

From: $38.00

Create anti-slip texture for a slip resistant floor surface with a great looking, long lasting green glow when lights are off
Largest particle size green "Glow in the Dark Sand" at 30 grit (500 microns)
Brightest and longest lasting glow pigment
Ideal for use with epoxies, polyaspartics, urethanes and polyurethanes
Mix with clear epoxies and concrete sealers to create glow in the dark floors
For use in both indoor and outdoor projects.
Settles well to the bottom of cracks and grooves in glow in the dark tables and other wood projects when mixed with epoxy
Creates an abrasive glow in the dark texture when applied in very thin layers

Select options