galvanized steel primer Archives

E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | App...

From: $55.00

Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
Excellent “wetting out” properties and performance over sound rusty surfaces
Outstanding abrasion & chemical resistance
Very good weather resistance
Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
Fast recoat 2-3 hours at 75°F & 50% R.H
Cures down to 18°F and apply up to 140°F
High heat resistance to 400°F dry
Single component, easy to use
Topcoat with most Epoxy, Urethane , Silicone
Excellent barrier coat over lead based coatings
USDA Approved

Select options

From: $95.00

High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
Self priming to steel including tight rust
Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
USDA Approved
Tight film, low permeability.
Exceptional adhesion Exceeds 500 psi
Excellent impact resistance 90 in lb
Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
Excellent against rust “undercutting”
Easy to apply brush, roll and spray
Low temp cure version to 25°F
Available 13 colors

Select options

From: $68.00

Select options

Out of stock

Rust-inhibitive for steel, aluminum, galvanized steel
Excellent corrosion-resistant primer
Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
Early moisture resistant
Quick dry to recoat time for faster project turnaround
Low temperature application down to 40F
Use as bonding primer with Cool Coat Thermal Barrier Paint
Available in red-oxide, gray and off-white
Acceptable for use in USDA-inspected facilities
Low VOC, water base, complies with SCAQMD & CARB