Return to previous page
  • Overview
  • Coverage Rate
  • Specs
  • Application
  • Video

EXPERT Clean & Bright Wood Brightener | Neutralize Wood Surfaces After Cleaning | Surface Prep Prior to Wood Staining

Our go-to Wood Brightener!   EXPERT’s Wood Brightener is STEP 2 of our 3-STEP system.  We use this to neutralize wood surfaces after cleaning.  Intended for use on all types of weathered wood, including decks, fences, siding, log homes, patio furniture and other exterior wood.  A must for any wood restoration! 

EXPERT’s Wood Brightener is ideal for surface prep prior to stain application. Product can be used solely as a cleaner and brightener, or as a neutralizer to further brighten woods that have been previously cleaned or stripped.

EXPERT STAIN & SEAL 3 STEP PROCESS FOR SUCCESS

Surface prep is key prior to application or re-application of all wood stains. For best results, follow our 3 step process using EXPERT Clean & Bright Professional Wood Care products followed by EXPERT Stain & Seal wood stains.

  • STEP 1:  CLEAN – Use one of our 4 wood cleaning products designed to clean and remove water and oil based stains as well as  dirt, grime and organic growth including mold, mildew and algae. In order of cleaning ability:     (LIGHT) Eco Cleaner (MILD) Wood Cleaner  (HEAVY) Wood Stripper (EXTRA HEAVY) Wood Stripper Booster
  • STEP 2: NEUTRALIZE & BRIGHTEN – Use our Chemical Neutralizer & Wood Brightener to deactivate cleaners used in Step 1 and return wood back to natural pH and wood color.
  • STEP 3- STAIN & SEAL – Use one coat of Expert Stain & Seal in transparent, semi-transparent or semi-solid colors.  For even more outstanding protection, try our premium one coat Expert Log & Timber Oil.

WHERE IS EXPERT CLEAN & BRIGHT WOOD BRIGHTENER USED?

  • Fence Cleaning
  • Deck Cleaning
  • Cedar Siding
  • Pergolas
  • Tongue and Groove
  • Any wood restoration

WHY EXPERT CLEAN & BRIGHT WOOD BRIGHTENER?

  • Brings back the original color of the wood
  • Neutralizes and brightens wood after any alkaline chemical wash
  • Restores proper pH in wood and opens wood grain to accept more stain
  • 100% Oxalic Acid
  • Wood Brightener
  • Step 2 or our 3 Step Process to Get your Project Ready for Expert Stain & Seal

 

COVERAGE RATE

Coverage: Add 4oz to 8oz of EXPERT’s Brightener added to one (1) gallon of water, each gallon covers 100 to 200 sq. ft. of surface area.

 

 

APPLICATION INSTRUCTIONS FOLLOW THESE SIMPLE APPLICATION STEPS

Easy-to-Use & Clean-Up.

Read through all the step-by-step instructions prior to using EXPERT®™ Clean & Bright Wood Brightener.

MIXING: Always wear heavy-duty rubber gloves, niosh approved respirator and PPE when working with EXPERT Clean & Bright Wood Brightener, or any other EXPERT Clean & Bright products. Mix 4oz to 8oz of Wood Brightener with each gallon of warm water and stir thoroughly until powder is mostly dissolved. Mix in a separate 5-gallon pail before transferring into a pump sprayer. This avoids clogging the sprayer. Use Brightener solution within 24 hours of mixing.  Wood Brightener mixed solution is colorless for ease of identification.

APPLICATION: Thoroughly wet the treatment surface, and all surrounding areas, including plants and shrubs with water before application. Apply EXPERT Clean & Bright Wood Brightener solution using either the sprayer, or a brush, a car wash brush, or mop. Scrubbing is not needed after using EXPERT’s Cleaner or Stripper. Let the Brightener solution sit for 5 to 15 minutes, keeping it wet with additional solution until an obvious color change has occurred.

If applying Brightener on vertical surfaces, begin at the bottom, working upwards. Repeat application, if needed.

RINSE: Rinse surfaces and surrounding areas thoroughly for 20 to 30 minutes with water from a hose or pressure washer using lowest pressure. Rinse wood and surrounding surfaces thoroughly, never let solution dry on windows, siding, metal and other surfaces or residue may be visible.

Allow wood surfaces to dry 48 to 72 hours (or longer) before applying EXPERT Stain & Seal wood stains.

TEST AREA: It’s recommended to test this product in a small, inconspicuous area to ensure desired results before use. Raised grain can occur as wood pores are opened during the cleaning process.

LIMITATIONS: EXPERT Clean & Bright Wood Brightener cannot remove intact paint, stain, or clear finishes, and may dull painted or metal surfaces if not rinsed immediately. Always store in a temperature-controlled room, kept from freezing, and can be stored for up to 36 months, unopened.

WARNING

  • Keep out of reach of children.
  • If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention.
  • Do not ingest.
  • Always wear personal protective equipment when using this product.
  • DO NOT MIX WITH OTHER CHEMICALS.

NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.

Reviews