Polyaspartic Protects Industrial Concrete Block Wall & Floor Enclosure
DESCRIPTION
Manufacturer looking for high performance coating system to protect unpainted concrete walls and floors in small room enclosure during manufacturing of deionized water. Company selected the 5500-Ex Polyaspartic.
The concrete floor was thoroughly prepared prior to application of product. The floor was prepped with a diamond grinder.
They applied one coat of the 5500-Ex Light Gray Color on the concrete block walls. Two coats of the 5500-EX were applied to the concrete floors. 2nd coat was applied 2 hours after the first. Put back into light service walking on it 5 hours later. Aluminum Oxide Anti-Slip Additive in a 16 grit was broadcast into the topcoat of 5500-Ex while wet to provide an extremely tough and dense anti slip surface for protection in a very wet operating environment.
Note: Light Gray color in pictures varies with amount and intensity of light on the surface.
PROJECT DETAILS
Company: Qualified Mobile, Inc
Project Location: Norco, CA
Project Size: 1000 sq’ concrete unpainted block walls & 300 sq’ concrete floor
PRODUCTS USED:
5500-EX Polyaspartic Light Gray Color : Applied 250 sq’/gallon on walls & applied 2 coats on floor at 150 sq’/gallon per coat
Aluminum Oxide : 16 grit Anti slip additive for the floor, 5 lbs broadcast into the 5500-Ex topcoat
Date: July, 2018
