Return to previous page
Filters
Show
E100V Vertical Wall Epoxy - blue Color

E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | Pools | 13 Colors

From: $50.00

  • No sagging on vertical walls to 12 mils per coat
  • Works well on underwater concrete decorative surfaces
  • Great for pools and water features
  • Good chemical and abrasion resistance
  • Long 45 - 90 min pot life
  • Outstanding adhesion 475 psi @elcometer
  • Comes in 5 color options
  • 100% solids, very low voc
Select options This product has multiple variants. The options may be chosen on the product page
E100V Vertical Wall Epoxy Coating

E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colors

From: $50.00

  • No sagging on vertical walls up to 8 mils per coat
  • Good for priming or coating concrete, wood or masonry.
  • Good chemical and abrasion resistance
  • Long 1 - 1.5 hour pot life
  • Excellent adhesion 425 psi @elcometer
  • Wide selection of 11 color options
  • Water base
Select options This product has multiple variants. The options may be chosen on the product page
E15M Epoxy for Steel and Concrete

E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F

From: $95.00

  • High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
  • Self priming to steel including tight rust
  • Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
  • Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
  • USDA Approved
  • Tight film, low permeability.
  • Exceptional adhesion Exceeds 500 psi
  • Excellent impact resistance 90 in lb
  • Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
  • Excellent against rust “undercutting”
  • Easy to apply brush, roll and spray
  • Low temp cure version to 25°F
  • Available 13 colors
Select options This product has multiple variants. The options may be chosen on the product page

Out of stock

E505 Vertical Wall Epoxy Block Filler

E505V Vertical Wall Epoxy Concrete Block Filler to 20 Mils No Sag | 11 Colors

From: $117.00

  • No sagging on vertical concrete and cement block walls up to 20 mils per coat
  • Great epoxy block filler
  • Good chemical and abrasion resistance
  • Long 45 - 90 min pot life
  • Excellent adhesion 420 psi @elcometer
  • Wide selection of 11 color options
  • 100% solids, very low voc
Select options This product has multiple variants. The options may be chosen on the product page
E517M Epoxy Mastic For Steel and Concrete

E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure...

From: $125.00

  • Self Priming on steel
  • Excellent primary containment coating for internal tank linings (when part of specified system)
  • Excellent secondary containment coating
  • Performs well over epoxy mortars and properly primed concrete surfaces
  • Can be applied on damp surfaces
  • Excellent chemical resistance to acids, caustics, solvents
  • Outstanding impact and abrasion resistance.
  • Exceptional adhesion Exceeds 700 psi
  • Excellent flexibility pass 7/8" mandrel 180º Bend
  • Apply Vertical Surfaces to 15 mils one coat
  • Meets USDA requirements.
  • Low temp cure version to 25°F
  • Low VOC 72 grams/Liter
Select options This product has multiple variants. The options may be chosen on the product page
E590 - E591 Wet Surface Epoxy

E591 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors – ...

From: $120.00

  • May be applied on wet or under water surfaces
  • Cold temperature application down to 35°F
  • Self-priming on steel and on most concrete applications
  • Long 40-50 POT Life at 75F
  • Ideal for marginally prepared and painted surfaces
  • Outstanding impact and abrasion
  • High film build - Up to 20 mil DFT per coat on horizontal surfaces
  • Vertical surfaces to 12 mils
  • Excellent coating for manholes
  • 100% solids and 0 g/L VOC's
  • 3 Colors Available
Select options This product has multiple variants. The options may be chosen on the product page

NP-1 Cove Master Vertical Epoxy Mortar | 100% Solids | High Build | 5 Colors

From: $56.00

  • Easy construction of vertical cove bases
  • 100% Solids Commercial Grade Epoxy
  • High build formula
  • 5 color options
  • Comes as 3 part kit with aggregate or Liquid Only to add your own aggregate or NP1 can also be used as a primer.
Select options This product has multiple variants. The options may be chosen on the product page

Copyright 2024 by Exterior Performance Coatings LLC