steel coating Archives

AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concret...

From: $120.00

Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
Great for use as direct to metal corrosion resistant primer over steel
Primer for concrete, masonry, wood, plastic surfaces
Scratch Resistant
Non-yellowing & UV Resistant Topcoat
Anti-Carbonation Protection
Excellent as a protective floor coating in a wide variety of concrete flooring applications
Breathable elastomeric outdoor waterproofer
Comes in a clear, ready to use white and 3 tint bases for custom coloring
Available in 4 gloss levels from matte, satin, semi-gloss to glossy

Select options

From: $55.00

Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
Excellent “wetting out” properties and performance over sound rusty surfaces
Outstanding abrasion & chemical resistance
Very good weather resistance
Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
Fast recoat 2-3 hours at 75°F & 50% R.H
Cures down to 18°F and apply up to 140°F
High heat resistance to 400°F dry
Single component, easy to use
Topcoat with most Epoxy, Urethane , Silicone
Excellent barrier coat over lead based coatings
USDA Approved

Select options

$340.00

Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
Great horizontal chemical protection for Secondary Containment for both steel and concrete surfaces
Thin film self leveling to 40 mils DFT one coat
Extremely tough with high wearing properties
Excellent abrasion resistance and impact resistance
Meets USDA requirements

Select options

From: $95.00

High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
Self priming to steel including tight rust
Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
USDA Approved
Tight film, low permeability.
Exceptional adhesion Exceeds 500 psi
Excellent impact resistance 90 in lb
Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
Excellent against rust “undercutting”
Easy to apply brush, roll and spray
Low temp cure version to 25°F
Available 13 colors

Select options

From: $125.00

Self Priming on steel
Excellent primary containment coating for internal tank linings (when part of specified system)
Excellent secondary containment coating
Performs well over epoxy mortars and properly primed concrete surfaces
Can be applied on damp surfaces
Excellent chemical resistance to acids, caustics, solvents
Outstanding impact and abrasion resistance.
Exceptional adhesion Exceeds 700 psi
Excellent flexibility pass 7/8" mandrel 180º Bend
Apply Vertical Surfaces to 15 mils one coat
Meets USDA requirements.
Low temp cure version to 25°F
Low VOC 72 grams/Liter

Select options

$142.00

Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
Vertical application to 10 mils DFT.
Great for Secondary Containment for both steel and concrete surfaces
Use as Primary Containment and Tank Linings when used as part of specified system
Excellent abrasion resistance with ceramic filler
Excellent in battery storage room areas.
Meets USDA requirements
May be applied in cold, damp conditions to 45°F with curing down to 35°F

Select options