secondary containment Archives

Out of stock

AM253 Novolac Anti-Microbial Epoxy Resists Mildew Growth Acid Solvent Chemicals

From: $398.00

Outstanding Spill & Splash Acid, Solvent, Chemical protection
Anti-Microbial prevents growth of micro-organisms
Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
Resists high concentration acids, some chlorinated solvents incl xylene, MEK
High build for heavy duty traffic, chemical troughs, curbs
Great for tanks, chemical spill areas
Works on cement, masonry or brick
Excellent adhesion 425 psi
Quick back in-service, light foot traffic 10-18 hrs
Low voc 47 g/L

Select options

$340.00

Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
Great horizontal chemical protection for Secondary Containment for both steel and concrete surfaces
Thin film self leveling to 40 mils DFT one coat
Extremely tough with high wearing properties
Excellent abrasion resistance and impact resistance
Meets USDA requirements

Select options

From: $125.00

Self Priming on steel
Excellent primary containment coating for internal tank linings (when part of specified system)
Excellent secondary containment coating
Performs well over epoxy mortars and properly primed concrete surfaces
Can be applied on damp surfaces
Excellent chemical resistance to acids, caustics, solvents
Outstanding impact and abrasion resistance.
Exceptional adhesion Exceeds 700 psi
Excellent flexibility pass 7/8" mandrel 180º Bend
Apply Vertical Surfaces to 15 mils one coat
Meets USDA requirements.
Low temp cure version to 25°F
Low VOC 72 grams/Liter

Select options

$142.00

Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
Vertical application to 10 mils DFT.
Great for Secondary Containment for both steel and concrete surfaces
Use as Primary Containment and Tank Linings when used as part of specified system
Excellent abrasion resistance with ceramic filler
Excellent in battery storage room areas.
Meets USDA requirements
May be applied in cold, damp conditions to 45°F with curing down to 35°F

Select options