Return to previous page
Filters
Show
7001 Polyurethane Single Part moisture Cured Primer

7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp

From: $80.00

  • Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
  • Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
  • Deep Penetrating Exceptional 1200 psi Adhesion
  • Superior Corrosion, Abrasion and Water Resistance
  • For Use in Submerged Service Applications
  • Quick 1 hr recoat (based on temp & humidity)
  • Semi-flexible & impact resistance
  • Reduced concrete outgassing problems
  • Moisture Cured easy to use 1 Component
  • Wide application range 35°F - 125°F (1.7°C - 52°C)
  • Available in black and non-pigmented clear (h0ney comb color).
Select options This product has multiple variants. The options may be chosen on the product page
E15M Epoxy for Steel and Concrete

E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F

From: $95.00

  • High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
  • Self priming to steel including tight rust
  • Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
  • Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
  • USDA Approved
  • Tight film, low permeability.
  • Exceptional adhesion Exceeds 500 psi
  • Excellent impact resistance 90 in lb
  • Excellent abrasion resistance CS 17 Wheel, 1000 cycles, 1000 g Load 21 mg loss
  • Excellent against rust “undercutting”
  • Easy to apply brush, roll and spray
  • Low temp cure version to 25°F
  • Available 13 colors
Select options This product has multiple variants. The options may be chosen on the product page
Primer

E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry

From: $60.00

  • Versatile product good on concrete, masonry, wood surfaces
  • Quick 4-6 hour Recoat for same day projects
  • Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
  • Helps prevent concrete outgassing problems when used as primer
  • Long 2 hour pot life
  • Excellent adhesion 425 psi
  • Good chemical and abrasion resistance
  • Water base
Select options This product has multiple variants. The options may be chosen on the product page

Out of stock

Extreme Bond Primer for slick, hard, glossy non-porous surfaces

Extreme Bond Primer For Interior Exterior Hard Slick Glossy Wall Surfaces


  • Promotes adhesion and bonding on hard to paint surfaces
  • Glazed Tile, Plastic, Glass, Fiberglass, Glossy Surfaces, Kitchen Cabinets
  • Tightly bonds to slick and glossy surfaces
  • Assures uniform appearance of topcoats
  • One coat application
  • Fast dry
  • Use as bonding primer with Cool Coat Thermal Barrier Paint
  • Topcoat With Hi-Performance coatings such as epoxy, polyaspartic, urethanes, lacquers and both oil and water based acrylics
Read more

Out of stock

Pro-cryl Universal Primer Water Based

Universal Acrylic Metal Primer Pro-Cryl Paint


  • Rust-inhibitive for steel, aluminum, galvanized steel
  • Excellent corrosion-resistant primer
  • Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
  • Early moisture resistant
  • Quick dry to recoat time for faster project turnaround
  • Low temperature application down to 40F
  • Use as bonding primer with Cool Coat Thermal Barrier Paint
  • Available in red-oxide, gray and off-white
  • Acceptable for use in USDA-inspected facilities
  • Low VOC, water base, complies with SCAQMD & CARB
Read more

Copyright 2023 by Exterior Performance Coatings LLC