Return to previous page
Filters
Show
Hot
5500 Polyaspartic Coating Polyurea Aliphatic, Flexible, Waterproof

5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids

From: $149.00

  • Beautiful Decorative High Gloss Appearance
  • Cold Temperature Application to 30F using Fast Set
  • Easy Squeegee/Roller Application
  • Waterproof, Aliphatic Resists UV Non-Yellowing
  • Indoor & Outdoor Floor and Countertop Projects
  • Good In Submerged Service Projects Like Fountains
  • Works well on concrete, brick, steel, wood, fiberglass
  • Excellent Chemical & Abrasion Resistance
  • Highly Adhesive, Flexible & Non-Brittle
  • Optional Fast or Slow Set, High Heat & Humidty
  • Great For Garage Floors Using Chips & Flakes
  • Commercial and Industrial Applications
  • Use as Stand Alone System or Topcoat to Epoxy
Select options This product has multiple variants. The options may be chosen on the product page
E590 - E591 Wet Surface Epoxy

E591 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors – ...

From: $120.00

  • May be applied on wet or under water surfaces
  • Cold temperature application down to 35°F
  • Self-priming on steel and on most concrete applications
  • Long 40-50 POT Life at 75F
  • Ideal for marginally prepared and painted surfaces
  • Outstanding impact and abrasion
  • High film build - Up to 20 mil DFT per coat on horizontal surfaces
  • Vertical surfaces to 12 mils
  • Excellent coating for manholes
  • 100% solids and 0 g/L VOC's
  • 3 Colors Available
Select options This product has multiple variants. The options may be chosen on the product page
Hot
Mend-Con RTU Concrete Epoxy Repair opt2

Mend-Con RTU Concrete Repair | Apply Wet Conditions & Underwater | Vertical No Sag | Quick Cure...

$470.00

  • Repair in Wet conditions - Apply Underwater
  • Great for Pool Repairs
  • High strength epoxy
  • Bonds to fresh or hardened concrete
  • No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
  • Quick Cure Dries to touch 15 minutes, paint in 1 hour and drive on it in 8 hours (temperature dependent)
  • 2x as strong as most concrete - Compressive strength 8000 psi
  • Easy To Apply – Convenient ready-to-use cartridge system
  • Wide application temperature 40°F – 100°F
  • Paintable surface
  • Comes in Case of 12 Cartridges & Cartridge Gun
Select options This product has multiple variants. The options may be chosen on the product page

Copyright 2024 by Exterior Performance Coatings LLC