industrial epoxy
Showing 1–12 of 22 results
-
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100%
- Protective and attractive color coat epoxy flooring system
- Designed to seal floors against abrasion, water, oils and chemicals
- Good Color stability
- Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
- Quick re-coat time 4-5 hours (at 75°F)
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
-
Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Sel
- Loading Docks: Used with aggregate to add durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- High Temperature Exposure: Added high temperature components provide increased temperature resistance to dry heat and direct contact
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
Bio-Gard E251 Heavy Duty Epoxy Coating | Dry or Damp Surfaces | VOC Free | 100% Solids | Air Shippable
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water. Anticorrosive barrier for in-service fuel storage tank interiors and roofs.
- Industrial Maintenance: General purpose chemical resistant lining for waste neutralization pits, secondary containment,etc. Makes an excellent floor and stair coating when used with entrained or broadcast grit.
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste. Especially useful as the final gloss coating rebuilt with other TFT products
- 100% Solids
- Ships Non-Hazardous
-
Bio-Gard E255 Severe Service Epoxy | Surface Tolerant Chemical Resista
- Chemical Resistance Areas: Designed for applications where resistance to aggressive chemicals is needed
- Industrial Maintenance: Heavy duty lining for steel and concrete where extreme resistance to aggressive chemicals such as 50% caustic soda or 98% sulfuric acid is required
- Marine and Offshore: Heavy duty repair and sealing compound for steel exposed to chemical or physical attack
- VOC Free
- 100% Solids
-
E116 Rust Inhibitive Epoxy Primer
- Excellent rust preventing properties
- Excellent resistance to "under cutting"
- Good flexibility and abrasion resistance
- Long recoat up to 6 months
- Outstanding adhesion and "wetting out" ability
-
E1501HN Novolac Epoxy (Replaces E1500HN) | Superior Steel & Concrete Chemical Horizontal Protection | Secondary Containment
- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Great horizontal chemical protection for Secondary Containment for both steel and concrete surfaces
- Thin film self leveling to 40 mils DFT one coat
- Extremely tough with high wearing properties
-
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy to Apply | Low VOC
- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
-
E1820 Clear Epoxy Coating | Metallic & Quartz Floor System | 40-50 Min Work Time | High Gloss | Abrasion Resistant
- Fast Cure Rate
- Excellent adhesion to concrete and masonry surfaces
- Designed as a clear epoxy for Metallic Pigments, Color Quartz and other decorative floors
- Long 40-50 Minute Working Time
- 100% solids formula eliminates any strong solvent odors
-
E555VN Novolac Epoxy | Superior Steel & Concrete Chemical Vertical Protection | Tank Linings
- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Vertical application to 10 mils DFT.
- Great for Secondary Containment for both steel and concrete surfaces
- Use as Primary Containment and Tank Linings when used as part of specified system
-
E603 Non Skid Epoxy | Truck Bed Liner | Anti-Slip
- Provides safer footing and traction
- Heavy duty non-ski resistance
- Provides excellent slip resistance
- Good water, salt and chemical resistance
- Excellent coating for Diamond Plate