garage floor coating
Showing 1–12 of 21 results
-
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solid
- Beautiful Clear Appearance
- Quick recoat time in as little as 1 – 1.5 hours
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
-
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongation | 1:2 Mix Ratio | 1 Coat Coverage
- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
-
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 120% Elongation
- Beautiful Clear MATTE FINISH Appearance
- Quick recoat time in as little as 1 – 1.5 hours and 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Outstanding Chemical Resistant
-
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100%
- Protective and attractive color coat epoxy flooring system
- Designed to seal floors against abrasion, water, oils and chemicals
- Good Color stability
- Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
- Quick re-coat time 4-5 hours (at 75°F)
-
Aluminum Oxide Anti-Slip | BROWN | 3 Grit Sizes | Non-Skid Tough Durab
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
Aluminum Oxide Anti-Slip | WHITE | 4 Grit Sizes | Non-Skid Tough Durab
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polyaspartic
- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyaspartic coating
- Works well with high performance 2 part floor coatings
-
Aspartic 100 High Build Polyaspartic for Concrete Floors | Low Temp 30°F | 100% Solids
- Tough, durable topcoat for interior epoxy floor coatings Very low to no odor great for sensitive odor indoor projects Can be used as high build topcoat up to 16 mils or 100 sq'/gallon Cold temperature application down to 30°F Excellent chemical and abrasion resistance UV Stable and will not yellow Beautiful high gloss appearance Designed for high traffic and industrial areas 100% Solids Performance Available in clear & 14 colors!
-
Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F
- Tough, durable topcoat for interior epoxy floor coatings
- Cold temperature application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
-
Aspartic 85 Slow Set Polyaspartic Concrete Floor Coating | Low Temp 30°F | Low Odor Option
- Tough, durable topcoat for interior epoxy floor coatings
- Cold weather application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
-
CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow
-
CLEAR-SEAL 100% Urethane Super Premium Sealer| Low Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow