Showing 1–12 of 15 results
-

6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100%
- Protective and attractive color coat epoxy flooring system
- Designed to seal floors against abrasion, water, oils and chemicals
- Good Color stability
- Wide application temperature range 35°F to 125°F (1.7°C to 52°C)
- Quick re-coat time 4-5 hours (at 75°F)
Starting at $268.00
-

DT-454 Epoxy Quick Cure UV Concrete Floor Coating Low Temp 40F | 100% Solids
- Tough, Durable Epoxy Coating
- Quick cure 6-7 hour re-coat time
- Outstanding Bonding
- Good chemical, impact and abrasion resistance
- UV Resistance
Starting at $70.00
-

E1820 Clear Epoxy Coating | Metallic & Quartz Floor System | 40-50 Min Work Time | High Gloss | Abrasion Resistant
- Fast Cure Rate
- Excellent adhesion to concrete and masonry surfaces
- Designed as a clear epoxy for Metallic Pigments, Color Quartz and other decorative floors
- Long 40-50 Minute Working Time
- 100% solids formula eliminates any strong solvent odors
Starting at $132.00
-

E1850 Epoxy Floor Coating | 100% Solids | High Gloss | Abrasion Resistant | Long 30-40 Min Work Time | High Build To 60 Mils DFT One Coat
- Easy to Use With Long to 40 Min Work Time
- 100% solids
- Extremely high gloss, tile-like finish
- Outstanding wear and abrasion resistance
- Good resistance to blushing
Starting at $95.00
-

E1875 Epoxy Resin | Chemical Resistance | 100% Solids
- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 70% Sulfuric Acid, 37% HCL and 50% Sodium Hydroxide
- Extremely tough with high wearing properties
- Excellent abrasion and impact resistance
- Good adhesion to concrete
Starting at $145.00
-

E211 Epoxy Primer & Sealer
- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Very low permeability-tight sealed film
- Used as a primer and/or finish coat
- USDA Approvable
Starting at $180.00
-

E398 High Build Acrylic Polyurethane | High Gloss
- Excellent weather resistance
- High Solids
- Low VOC
- Good chemical and stain resistance
- Excellent gloss and color retention
Starting at $146.00
-

E671 UV Resistant Epoxy Floor Coating | Clear | 100% Solids | For Metallic Pigment and Full Flake & Quartz Systems
- Clear epoxy great for use with metallic pigments and full flake or quartz broadcast systems
- UV Resistance Additive in Coating
- High Build – 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
Starting at $55.00
-

Hybrid Stone Flakes | Multi-Sized | For Epoxy, Polyaspartic, Urethane Coatings
- Decorative Natural Stone Look
- 12 Different Stone Color Blends to Choose
- Adds a decorative look to any epoxy, polyaspartic, polyurea, urethane flooring project
- Random multi-sized flakes create a real stone appearance
- Hide sub-surface imperfections
Starting at $3.00
-

HyperBOND Epoxy | Wet Condition Moisture Tolerant | Concrete Floor Coating | Low Temp 40F | 100% Solids
- Tough, Durable Epoxy Coating
- Outstanding Bonding
- Water Insensitive and Can Be Applied In Wet Conditions
- Withstands up to 9 lbs. of hydrostatic pressure
- Cold temperature application down to 40F
Starting at $60.00
-

HyperFLOW Metallic Epoxy
- Low VOC Formulation low Odor Extreme Flowability Extended Working Times Low Viscosity High Gloss Reflective Finish High Compressive Strength Chemical & Impact Resistant Superior Adhesion Optimal Pigment Dispersion
Starting at $285.00
-

HyperREZ UV Epoxy Concrete Floor Coating | 45 min Work time | 100% Solids | Ultra Clear Great for Metallics | Low Temp 40°F
- Tough, durable epoxy floor coating Cold temperature application down to 40F Good chemical and abrasion resistance High Build Applications up to 32 mils/coat (50 sq'/gal) UV Resistant Beautiful high gloss appearance Designed for high traffic and industrial areas High solids 100% Withstands up to 9 lbs. of hydrostatic pressure Available in clear & 12 colors! (Pigment sold separately)
Starting at $70.00