exterior control joints
Showing all 10 results
-
3246 Polyurea Flexible Expansion Joint Filler | Quick Cure | Exterior Interior | Low Temp -20°F | Elongation 600%+
- Quick set with "Drive-Over" in 30 to 45 minutes
- High Density Polyurea
- Very Flexible with Elongation ASTM D124 >600%
- Meets USDA Requirements for intermittent contact
- Meets FAA P605 – for airfield joints
-
SX-20005-5 Polyethylene Tank 6.5 Gallons for US SAWS Polyurea Joint Fi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20005-6 Polyethylene Tank Cover 6.5 Gallon for US SAWS Polyurea Joi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20017 Tank Warmers For Cold Weather for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20111 Static Mixer Retaining Nut for US SAWS Polyurea Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20116 Manifold With Grease Fittings for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20201 Replacement Pump for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-21000 Polyurea Pump 2:1 Ratio Conversion Kit for US SAWS Polyurea J
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-21023 Power Inverter 1200W for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX20150 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed on Concrete Floor Projects
- Reduce Material Waste With More Controlled Material Flow
- The dispensing wand has a variable speed control, and start/stop control
- Production rates to 5,000 lineal joint filling feet per day (new concrete)
- Allows Quick Joint Filling vs Cartridge Application