esd floor paint
Showing all 9 results
-
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | Degreaser
- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
-
6210 ESD Polycoat Anti-Static Floor Paint | Dissipative | Clear | ANSI/ESD S20.20-2014
- Suitable for dissipative packaging outlined in ANSI/ESD S20.20
- Resistance: 10e6-10e9 ohms/sq when tested to ANSI/ESD STM11.11 88
- Dissipative Coating
- Water-based polyurethane with zero VOC
- Reduces tribocharging
-
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
6700C Premium ESD Static Conductive Anti-Static Floor Paint | 3 Colors | ANSI/ESD S20.20-2014
- Static conductive 10e3 - 10e6 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
GroundWorx Basics (SF) ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
- Water - based epoxy, matte finish
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Great low cost solution for concrete, wood, VCT Tile floors
- Extended working time - POT life 40+ minutes
-
GroundWorx Basics (SF) ESD Static Dissipative Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
- Water - based epoxy, matte finish
- Static Dissipative 10e6 - 10e9 ohms
- Great low cost solution for concrete, wood, VCT Tile floors
- Extended working time - 40+ minutes
- Quick turnaround - Light traffic 12 hours after application
-
GroundWorx Ultra (HB-97.2) ESD Static Conductive Epoxy Basecoat 100% Solids | Forklift Traffic | ANSI/ESD S20.20-2014
- Static dissipative or conductive high build epoxy electrical protection when used with the GroundWorx Ultra ESD Urethane Topcoat, which comes in either dissipative >1.0 x 10e6 ohms or conductive <1.0 x 10e6 ohms electrical resistance, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Great for high traffic, high wear commercial & industrial applications
- Use on Concrete, Wood and old VCT surfaces
- Moisture tolerant primer
-
GroundWorx Ultra (HB-97.2) ESD Urethane Top Coat | Static Dissipative or Conductive | ANSI S20.20-2014
- Optional Static conductive <1.0 x 10e6 ohms or Dissipative >1.0 x 10e6 and <1.0 x 10e9 ohms high performance electrical protection, limiting Static Charge Generation to <15 volts
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications with high build 14 mil system
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Primer
- Use on Concrete, Wood and old VCT surfaces
- Tough surface: impact resistance 140 psi and tabor abrasion test 25 mg loss
-
GroundWorx Ultra Elevated Moisture Epoxy Primer | For Use In GroundWorx Ultra Epoxy Systems | Zero VOC | Recoat in 5 Hours
- Protects ESD Coatings System from moisture related issues (withstands up to 8lbs of moisture vapor pressure)
- Apply when relative humidity is up to 95%
- Significantly reduce chance of concrete outgassing
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Basecoat and the companion Ultra Urethane Toopcoat