Return to previous page
Filters
Show
E101C Moisture Cured Urethane

E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling

From: $85.00

  • Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
  • Excellent adhesion and sealer for concrete, wood and masonry surfaces.
  • Extremely hard, yet flexible film.
  • Outstanding “wearing properties
  • Highly resistant to abrasion and impact.
  • Excellent stain resistance.
  • Keeps concrete dusting down.
  • Good chemical resistance.
  • Easy to clean and maintain.
  • Quick recoat as soon as 1-2 hours
  • One component, easy to use - No mixing 1-2 hour POT Life.
Select options This product has multiple variants. The options may be chosen on the product page
E1500N Novolac Epoxy Secondary Containment

E1500HN Novolac Epoxy | Superior Steel & Concrete Chemical Horizontal Protection | Secondary Co...

$340.00

  • Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
  • For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
  • Great horizontal chemical protection for Secondary Containment for both steel and concrete surfaces
  • Thin film self leveling to 40 mils DFT one coat
  • Extremely tough with high wearing properties
  • Excellent abrasion resistance and impact resistance
  • Meets USDA requirements
Select options This product has multiple variants. The options may be chosen on the product page
E1600 Polyaspartic Clear Non-Yellowing High Solids

E1900 Polyaspartic Clear | 40-50 Min Work Time | High Solids | Apply 40°F – 100°F | Chemical A...

From: $260.00

  • Excellent Clear Top coat for decorative flake and quartz granule systems and solid color epoxy coatings.
  • Fast set
  • Resistant to hot tire pick up.
  • Highly resistant to chemical, abrasion and impact
  • Meets USDA requirements for incidental food contact
  • High Gloss
  • Extremely hard, yet flexible.
  • Excellent weather resistance
  • Outstanding “wearing” properties.
  • Easy to clean.
  • Non-chalking and non-yellowing
  • Apply up to 12 mils DFT in one coat (110 sq'/gallon)
Select options This product has multiple variants. The options may be chosen on the product page
E352P Polyester Polyurethane Light Blue

E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interio...

From: $205.00

  • Great Interior & Exterior Horizontal Concrete & Steel Protection
  • Exceptional Exterior Durability
  • Excellent weather resistance
  • Non-chalking and non-yellowing with excellent gloss and color retention
  • Extremely tough, yet flexible
  • A tile-like finish.
  • Easy to clean
  • Excellent chemical and stain resistance
  • Highly resistant to abrasion and impact
  • Outstanding wearing properties
  • Handles up to 250°F Dry Service
  • Long 4 hour POT life @ 75ºF
  • Available in clear and 11 colors
Select options This product has multiple variants. The options may be chosen on the product page
Tan Color

E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta...

From: $70.00

  • Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
  • Outstanding Chemical Resistance
  • Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
  • Aliphatic, UV Stable and will not yellow
  • Easy to Use one part with Long 3-5 Hour Pot Life
  • Great for both Indoor and Outdoor Concrete Floor Projects
  • Solvent Based With Excellent adhesion
Select options This product has multiple variants. The options may be chosen on the product page
E517M Epoxy Mastic For Steel and Concrete

E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure...

From: $125.00

  • Self Priming on steel
  • Excellent primary containment coating for internal tank linings (when part of specified system)
  • Excellent secondary containment coating
  • Performs well over epoxy mortars and properly primed concrete surfaces
  • Can be applied on damp surfaces
  • Excellent chemical resistance to acids, caustics, solvents
  • Outstanding impact and abrasion resistance.
  • Exceptional adhesion Exceeds 700 psi
  • Excellent flexibility pass 7/8" mandrel 180º Bend
  • Apply Vertical Surfaces to 15 mils one coat
  • Meets USDA requirements.
  • Low temp cure version to 25°F
  • Low VOC 72 grams/Liter
Select options This product has multiple variants. The options may be chosen on the product page
E555N Novolac Epoxy Chemical Resistant

E555VN Novolac Epoxy | Superior Steel & Concrete Chemical Vertical Protection | Tank Linings

$142.00

  • Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
  • For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
  • Vertical application to 10 mils DFT.
  • Great for Secondary Containment for both steel and concrete surfaces
  • Use as Primary Containment and Tank Linings when used as part of specified system
  • Excellent abrasion resistance with ceramic filler
  • Excellent in battery storage room areas.
  • Meets USDA requirements
  • May be applied in cold, damp conditions to 45°F with curing down to 35°F
Select options This product has multiple variants. The options may be chosen on the product page
E669 Acrylic High Gloss Sealer

E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding...

From: $55.00

  • Non-yellowing, high gloss. properties.
  • Excellent penetration and high “wetting out”
  • Excellent adhesion to concrete.
  • Great for Concrete, Masonry & Wood Surfaces
  • Good UV resistance.
  • Good water and salt chemical resistance.
  • Good stain resistance.
  • Prevents “dusting” by increasing strength of concrete
  • Ideal as dustproofing sealer.
  • Very fast dry time.
Select options This product has multiple variants. The options may be chosen on the product page
E700HV Epoxy

E700HV Epoxy | Exceptionally Tough | Abrasion & Chemical Resistant | No Topcoat Required

From: $64.00

  • Saves Money - Eliminates Need for Urethane or Polyaspartic Topcoat
  • Extremely Tough D-90 Shore Hardness
  • Exceptional Abrasion resistance Only 19 mg loss (Tabor test)
  • Excellent Adhesion 420 psi
  • Good Chemical Resistance
  • Great Looking Very High gloss (80-105 at 60 degrees @ glossmeter)
  • 97% Solids Commercial Epoxy
  • High build 15-30 mils one coat (53 - 106 sq'/gal)
  • Wide Variety of 20 Colors
Select options This product has multiple variants. The options may be chosen on the product page
E903 Urethane High Temperature

E903M Urethane Cement High Build Mortar | Wet Heat to 200F | Hot Oil & Water Wash | Resist Fung...

From: $200.00

  • Excellent heat and thermal shock resistance to 200F
  • Very good chemical resistance to organic and inorganic acids and solvents
  • Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
  • Seamless hygienic finish with no grout lines
  • High build repairs to 1"
  • Excellent bonding characteristics
  • Low odor, fast installation and fast cure.
  • Low temp application down to 45F
  • Available 3 colors gray, tan and tile red
Select options This product has multiple variants. The options may be chosen on the product page
E903 Urethane High Temperature

E903SL Urethane Slurry | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Resi...

From: $100.00

  • Excellent heat and thermal shock resistance to 200F wet heat
  • Very good chemical resistance to organic and inorganic acids and solvents
  • Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
  • Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
  • Good anti-skid surface
  • Excellent bonding characteristics
  • Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
  • Low temp application down to 45F
  • Available 3 colors gray, tan and tile red and 2 package sizes
  • E903SL Urethane Slurry is the high performance basecoat to the E903TC Urethane Top Coat high heat System
Select options This product has multiple variants. The options may be chosen on the product page
E903 Urethane High Temperature

E903TC Urethane Topcoat | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Res...

From: $100.00

  • Excellent heat and thermal shock resistance to 200F wet heat
  • Very good chemical resistance to organic and inorganic acids and solvents
  • Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
  • Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
  • Good anti-slip surface
  • Excellent bonding characteristics
  • Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
  • Low temp application down to 45F
  • Available 3 colors gray, tan and tile red
  • E903TC Urethane is the high performance topcoat to the E903SL Urethane high heat Slurry System
Select options This product has multiple variants. The options may be chosen on the product page
HyperCRETE Urethane Slurry Mix Commercial Kitchen

HyperCRETE Urethane Slurry | High Wet Heat 200F & Dry Heat 300F | Hot Oil & Water Wash

$265.00

  • Excellent heat and thermal shock resistance
  • Very good chemical resistance to organic and inorganic acids and solvents
  • Quick 4 hour recoat and 12 hour full service times
  • Works great for commercial kitchens and industrial areas subject to hot water and hot oil spills
  • Excellent bonding characteristics
  • Rapid curing and harnders
  • No VOC's and no odor
  • Low temp application down to 45F
  • Available 2 colors tile red and gray
2 GALLON KIT
Select options This product has multiple variants. The options may be chosen on the product page
Novolac Epoxy Acid Solvent Chemical Resistant NE253

NE3770 Novolac Chemical Resistant Epoxy | High Heat Exposure to 225˚F | Meets USDA Criterea | 100% S...

From: $315.00

  • High Heat Resistance to 225˚F+
  • Strong Chemical Resistance to wide range of chemicals including 70% Sulfuric Acid 90 days+ and 50% Sodium Hydroxide 30 Days
  • Great spill, splash and secondary containment chemical spill areas for cement, masonry or brick
  • Meets USDA criteria
  • High Strength
  • 100% solids high build
  • Low Odor
  • Superior Adhesion
  • Selection of clear and 4 color options
Select options This product has multiple variants. The options may be chosen on the product page

Copyright 2024 by Exterior Performance Coatings LLC