best high heat epoxy
Showing all 12 results
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
-
Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable
- Loading Docks: Generally used with aluminum oxide abrasive for maximum durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Sel
- Loading Docks: Used with aggregate to add durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- High Temperature Exposure: Added high temperature components provide increased temperature resistance to dry heat and direct contact
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
Bio-Seal E907 Resin | High Heat Tolerance | Quick Return to Service
- Saturation Resin: For use with reinforcing fibers and fabrics to create composite repairs of tank tops, pipes or similar structures
- Pressure Transfer Compound: Very high compressive strength and modulus provides an excellent material for void and annulus filing of pipe sleeves, void spaces, etc.
- Penetrating Sealer: Use to seal and protect concrete, brick and other similar surfaces against chemical attack and water penetration
-
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
-
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containment | Chemical Resistant | USDA | 100% Solids
- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
-
EE-95 Novolac Epoxy Rebuild | 100% Solids | Restoration | Vertical
- Rebuild any pit repair
- Smoothing or leveling of vertical areas
- Solvent Free
- VOC Free Product
- Strong chemical resistance
-
GasPruf E132 Reinforced Epoxy Coating
- Anticorrosive Coating: "Super-Duty" anticorrosive for in-service fuel storage tank interiors and roofs
- Repair Compound: Patching, leak sealing etc. above and below water or hydocarbon fuels
- Displaces water or hydrocarbons such as gasoline or diesel fuel from wetted surfaces
- Solvent Free
- 100% Solids
-
SLR-20 Epoxy & Urethane Hybrid | High Elongation | Elastomeric | Impact & Tear Resistant
- High elongation and elastomeric
- High Resilience
- Tear Resistant
- Impact Resistant Flooring/ Coating
-
Spraythane FL Epoxy & Urethane Topcoat | Immersion Service | 100% Solids
- Tough and Flexible Resilience
- Immersion Service
- High Tear Resistant
- High Impact Resistant
- Combat Cavitation and Abrasion
-
Tower-Gard E568 Anticorrosive Coating for Steel and Galvanizing
- Anticorrosive Coating: For structural steel and galvanized surfaces in atmospheric service. Tower-Gard E568 is uniquely tolerant of compromised surfaces. Tower-Gard E568 can be applied over all types of tightly adherent existing coatings as well as to bare steel or galvanizing.
- Displace water from wet surfaces
- Use in Underwater
- Low Toxicity
- Ships Non-Hazardous