abrasion resistant
Showing all 7 results
-
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polyaspartic
- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyaspartic coating
- Works well with high performance 2 part floor coatings
-
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
-
E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interior
- Great Interior & Exterior Horizontal Concrete & Steel Protection
- Exceptional Exterior Durability
- Excellent weather resistance
- Non-chalking and non-yellowing
- Excellent gloss and color retention
-
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Stable
- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use One Part with Long 3-5 Hour Pot Life
-
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding Adhesion
- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
-
E700HV Epoxy | Exceptionally Tough | Abrasion & Chemical Resistant | No Topcoat Required
- Saves Money - Eliminates Need for Urethane or Polyaspartic Topcoat
- Extremely Tough D-90 Shore Hardness
- Exceptional Abrasion resistance Only 19 mg loss (Tabor test)
- Excellent Adhesion 420 psi
- Good Chemical Resistance
-
P3 Marine | Saltwater, Fresh Water & Chloride Concrete Protection | Waterproofs | Permanent Salt, Freeze Thaw, Abrasion Improvement | Nano-Technology
- Exceptional Marine Saltwater and Winter Road Salt Concrete Waterproof Protection from moisture, chloride salt, other contaminant penetration
- Great for Marine and Inland Waterway concrete infrastructure, docks, ramps, bridges, roads, parking lots
- Easy Spray Apply Low Tide and Wet Concrete Surfaces Horizontal & Vertical
- Increased Concrete Durability and Life Span with 1x Permanent Application Using Colloidal Silica Nano-Technology
- Reduces Depth of Penetration of Water Under Pressure 90% EN 12390-8