abrasion resistant epoxy
Showing all 6 results
-
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy to Apply | Low VOC
- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
-
E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure 25F | Extremely Flexible
- Self Priming on steel
- Excellent as a primary containment coating for internal tank linings (when part of specified system)
- Excellent as a secondary containment coating
- Performs well over epoxy mortars and properly primed concrete surfaces
- Can be applied on damp surfaces
-
EE-70 Amine Cured 100% Solids Spray Apply Epoxy | Secondary Containment | NSF 61 Potable Water | USDA | Chemical Resistant | Tanks | Floors | Pipes
- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
-
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containment | Chemical Resistant | USDA | 100% Solids
- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
-
NE253SL Novolac Epoxy Colored Slurry Acid Chemical Resistant Floor Coating
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents
- Applied at 1/16" thick for resurfacing traffic and chemical spill areas
- Excellent adhesion 425 psi
-
S16 Epoxy Coating | Metals | Immersion Service | NSF 61 Potable Water
- Protective Coating for Metals
- Immersion Service
- Approved in Testing for use with Potable Water
- USDA for Incidental Food Contact