Tile
Showing 9–16 of 68 results
-
5500HS 100% Solids Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | Flexible 120% Elongation | 1:2 Mix Ratio | 1 Coat Coverage
- Beautiful Clear HIGH GLOSS Appearance
- 100% Solids For Thick 1 Coat Coverage Full Flake, Quartz, Silica Sand Systems to 16 mils DFT (100 sq'/gallon)
- Quick 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
-
5500M Matte Finish Polyaspartic Polyurea Coating Roll Down | Low Temp 30°F | 89% Solids | Flexible 120% Elongation
- Beautiful Clear MATTE FINISH Appearance
- Quick recoat time in as little as 1 – 1.5 hours and 24 hour back in-service (at 75F)
- Waterproofing Elastomeric Systems
- Good In Submerged Service Projects Like Fountains
- Outstanding Chemical Resistant
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
-
Bare Brick, Stone & Masonry Graffiti Remover | Highly Effective All Purpose Tag Removal | Biodegradable
- Highly effective biodegradable professional grade graffiti remover
- Great for porous concrete, brick, stone, wood as well as removing graffiti from tough split faced block, cinder block and exposed aggregate surfaces
- Safe and effective for use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment
- Requires minimal rinsing and any resultant run-off is a readily biodegradable gray water soap that can be left to biodegrade, recycled or further diluted for use in gardens, etc.
- No shadows, damage or harsh scrubbing required
-
Bio-Chem E330 High Performance Epoxy | 100% Solids | Aggressive Chemical Exposures | High Heat
- Down-Hole Tubular Coating: Id and OD coating, especially suitable for "Ruffcoat" OD treatment
- Tank Lining: High hydrocarbon chemical resistance and early return to service make Bio-Chem E330 an ideal high build tank lining
- Hopper Car Lining: excellent physical and chemical resistance properties
- Concrete Containment: Excellent physical and chemical resistance properties
-
Bio-Chime E390 Joint Sealant & Flexible Coating | Expansion Joints | Apply to 2″ Thick | Elastomeric | VOC Free
- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
- Durable for foot traffic environments
- Flexibility helps resist impact and substrate movement