Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing all 8 results
-
Aluminum Oxide Anti-Slip | WHITE | 4 Grit Sizes | Non-Skid Tough Durab
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polyaspartic
- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyaspartic coating
- Works well with high performance 2 part floor coatings
-
Anti-Slip Glow Sand | Aqua, Blue & Green | Photoluminescent for Floor Coatings | Glows to 8+ Hours | 3 Grit Sizes
- Create anti-slip texture for a slip resistant floor surface with a great looking, long lasting green glow when lights are off
- Largest particle size green "Glow in the Dark Sand" at 30 grit (500 microns)
- Anti-Slip Glow Sand comes in Green (30 grit), Blue (65 grit) and Aqua (110 grit)
- Brightest and longest lasting glow pigment
- Ideal for use with epoxies, polyaspartics, urethanes and polyurethanes
-
Garnet Anti-Slip Additive| BROWN | 36 Grit | Non-Skid Tough Durable Fl
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part pigmented floor coatings
- Non-reactant – will not interfere with your coatings
- Well bonded into the body of the coating
- Long lasting for extended anti-slip performance
-
Glow Anti- Slip Sand Sample Kit | Aqua, Blue & Green | Photoluminescent for Floor Coatings
- Ideal for use with epoxies, polyaspartics, urethanes and polyurethanes
- Anti-Slip Glow Sand Kit comes in Green (30 grit), Blue (65 grit) and Aqua (110 grit)
- Mix with clear epoxies and concrete sealers to create glow in the dark floors
- For use in both indoor and outdoor projects
- Fine Sand Texture
-
Green Safety Glow in the Dark Tape | Stairways, Steps, Emergency Exit, Walkways, Ramps | 24 Hour Glow | Excellent Adhesion | Rechargeable
- Glow time is 24 hours
- Suitable for Indoor and Outdoor Applications
- Water Resistant
- Works on wood, vinyl, plastic, leather, metal and laminate
- Excellent adhesion, rechargeable and clean removal
-
Polybead Anti-Slip Additive | Least Change Appearance | Easy to Clean & Use | 2 Grit Sizes
- Adds skid resistance & texture profile to a surface
- Least Change in Surface Appearance & Easiest to Clean
- Very small amounts required
- Use with Epoxy, Polyaspartic, Urethane, Polyurethane and most coatings
- Lightweight aggregate, blends well into coating
-
Silica Sand Anti-Slip Additive For Epoxy, Polyaspartic, Polyurethane,
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Comes in 5 mesh sizes