Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing all 12 results
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
- Penetrating Primer Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
-
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Composite Resin: Works well with fiberglass and carbon fabrics to create field-applied composites
- Mortar Repair: Effective epoxy resin for making epoxy strengthened mortar. Excellent for industrial applications such as pump bases
- 100% Solids
- Formulated with no volatile solvents
-
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colo
- No sagging on vertical walls up to 8 mils per coat (4 mils DFT)
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
-
E116 Rust Inhibitive Epoxy Primer
- Excellent rust preventing properties
- Excellent resistance to "under cutting"
- Good flexibility and abrasion resistance
- Long recoat up to 6 months
- Outstanding adhesion and "wetting out" ability
-
E145 Polyamide Epoxy Block Filler | Concrete Block & Masonry Vertical Walls | High Build to 11.5 Mils DFT One Coat
- Excellent Adhesion to Vertical Block and Masonry Surfaces
- Excellent filling properties provide ideal "hold out"
- High Build Apply to 11.5 mils DFT (dry film thickness) One Coat
- Basecoat for high performing coating systems
- Hard film with high impact
-
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
-
E2.8 Poly-Chemcure Primer | Fast Recoat | Low-Temp | OEM/Steel Fabricator
- High performance primer can be prepared on carbon steel, galvanized steel and aluminum
- Recoating in 90 minutes is possible for maximum productivity
- No induction time and longer pot life will improve productivity
- A smooth, sandable primer at 3 mils DFT over abrasive blasted or power tool cleaned substrate is needed for additional corrosion resistance
- Application by brush and roller, in addition to spraying, may be necessary
-
E332 Polyester Polyurethane Coating| Clear | Topcoat | High Gloss | Chemical, Impact & Abrasion Resistant
- Excellent Chemical Resistance
- High Gloss
- Excellent Weather Resistance
- Highly Resistant to Abrasion and Impact
- Non-chalking and non-yellowing
-
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
-
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 100% Solids
- Low Viscosity Epoxy
- Increases Adhesion of Coating System to Metal Surfaces
- Tough, Water Resistant Coating
- 100% Solids
-
NE253V Novolac Vertical Wall Colored Epoxy Chemical Resistant Acid Sol
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Medium build topcoat for chemical areas, walls, troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
- Excellent adhesion 425 psi