Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing all 12 results
-
800 Slow Set Polyurea Adhesive Sealant & Caulk
- Back in-service 1 - 1.5 hours, recoat 30-45 minutes, full cure 6-8 hours
- High chemical & fuel resistance
- Highly adhesive to many substrates
- Good working time, quick gel time 6-10 minutes, trowel-able
- Cartridge or pump dispensed
-
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | Wood
- Vertical hold directly from the cartridge or static mixer
- Can be sprayed over with polyurea in a short time
- High chemical resistance, fuel resistant,
- Highly adhesive to many substrates
- Cold weather application down to -20F
-
AEROSIL R 202 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 22 lbs (10 kg) | Evonik
- Great thickening agent to wide range of coatings including epoxy and polyurethane coatings
- Allows coatings to be used as great concrete crack, hole, joint and spall repairs
- When mixed into fast cure epoxy, makes for very quick repairs
-
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
-
Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and Overhead Application | Can Apply Underwater
- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
-
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
-
E1000 Epoxy Concrete Repair Kit | Holes to 1″ | Cracks | Spall | 3 Color
- Make quick, permanent repairs to concrete
- Patch cracks, spalled concrete and potholes
- Outstanding adhesion to concrete
- Excellent chemical, abrasion and impact resistance
- USDA approved for food processing plants
-
E105M Epoxy Mortar Concrete Resurfacer & Patch Kit
- Economical, Easy resurfacing old and damaged concrete floors
- Compressive Strength 8,400 psi ASTM D695
- Heat Deflection Temp 131.7F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
-
E110M Epoxy Mortar Concrete Premium Resurfacer & Patch Kit
- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- 10% greater coverage/unit vs E105M Epoxy Mortar
- Compressive Strength 11,150 psi ASTM D695
- Heat Deflection Temp 158.9F ASTM D648
-
Grip E751 | Annulus Void Filler | High Temperature Tolerant | Long Working Time
- Fills large void areas and annulus
- Low exotherm and low viscosity
- Solvent Free Formulation
- No VOC or odor concerns
- Long Pot Life
-
NE256M Novolac Epoxy Mortar Acid Solvent Chemical Resistant Patch Kit/Resurfacer
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Apply at 1/8" to 1/4" to resurface traffic and chemical spill areas
- Used in many chemical immersion projects, curbs, tanks and chemical troughs
- Resists wide range of chemicals, solvents and acids
- Excellent impact and abrasion resistance
-
ProGrout (formerly 4034) Polyurea Concrete Quick Repair | Ultra Low Viscosity | Apply Low Temp -20°F | Low Odor
- Back-in-service as fast as 30 min with heavy forklift loads
- Meets OSHA fork lift operator floor facility safety, surface conditions
- Save Bearings & Wheels On Electric Pallet Jacks and Electric Lifts.
- Meets USDA requirements
- Cold applications down to -20°F (-26°C)