Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing all 22 results
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
Bio-Chem E330 High Performance Epoxy | 100% Solids | Aggressive Chemical Exposures | High Heat
- Down-Hole Tubular Coating: Id and OD coating, especially suitable for "Ruffcoat" OD treatment
- Tank Lining: High hydrocarbon chemical resistance and early return to service make Bio-Chem E330 an ideal high build tank lining
- Hopper Car Lining: excellent physical and chemical resistance properties
- Concrete Containment: Excellent physical and chemical resistance properties
-
Bio-Dur E3000 Wet Surface High Temperature Epoxy Coating | Up To 350°F
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Tg coating with hard, abrasion-resistant pigmentation
- Repair Compound: Patching, leak sealing, etc. above and below water
- Wastewater: Reinforces, smooths, and protects concrete exposed to chemical or municipal waste
-
Bio-Dur E3050 Novolac Epoxy | High Temperature | Wet or Dry Surface Ap
- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Tg coating with hard, abrasion-resistant pigmentation
- Tank and Pipeline Liner: Chemical Resistance and high hardness create durable corrosion protective barrier
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable
- Loading Docks: Generally used with aluminum oxide abrasive for maximum durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
Bio-Gard E255 Severe Service Epoxy | Surface Tolerant Chemical Resista
- Chemical Resistance Areas: Designed for applications where resistance to aggressive chemicals is needed
- Industrial Maintenance: Heavy duty lining for steel and concrete where extreme resistance to aggressive chemicals such as 50% caustic soda or 98% sulfuric acid is required
- Marine and Offshore: Heavy duty repair and sealing compound for steel exposed to chemical or physical attack
- VOC Free
- 100% Solids
-
Bio-Seal E206 Epoxy Coating | High Temperature Application | 100% Solids | VOC free | Up to 40 mils
- High Temperature Coating: for pipelines, tanks and other equipment. Provides outstanding protection against environment exposures and hydrocarbons
- High Temperature Service
- Ambient Hardening
- Single coat application up to 40 mils
- Long overcoat window
-
Chem-Put E32 High Build Epoxy Coating for Chemical Exposures | 100% Solids
- Concrete Repair: High Build Application allows for concrete resurfacing after attack by chemical exposure
- Marine and Offshore: Heavy Duty Repair and sealing compound in wet environments
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Tank Lining: High hydrocarbon chemical resistance with early return to service makes an ideal high build tank lining
- 100% Solids
-
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
-
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy to Apply | Low VOC
- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
-
E1875 Epoxy Resin | Chemical Resistance | 100% Solids
- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 70% Sulfuric Acid, 37% HCL and 50% Sodium Hydroxide
- Extremely tough with high wearing properties
- Excellent abrasion and impact resistance
- Good adhesion to concrete
-
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
-
EE-121HT Amine Cured 100% Solids Novolac Epoxy | Top Coat | High Heat
- Temperature resistance up to 500F (dry) and spike to 580F (3 hours)
- Strong chemical resistance
- 100% solids
- Very good abrasion
- Great for aggressive, industrial applications
-
EE-70 Amine Cured 100% Solids Spray Apply Epoxy | Secondary Containment | NSF 61 Potable Water | USDA | Chemical Resistant | Tanks | Floors | Pipes
- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
-
EE-71 Amine Cured 100% Solids Novolac Epoxy Topcoat| Secondary Containment | Chemical Resistant | USDA | 100% Solids
- Used in Aggressive Environments with Exposure to Acids and Alkalis
- Chemical Resistant
- Excellent Flexibility
- High Abrasion Resistance
- Hand or Spray Application
-
EE-95 Novolac Epoxy Rebuild | 100% Solids | Restoration | Vertical
- Rebuild any pit repair
- Smoothing or leveling of vertical areas
- Solvent Free
- VOC Free Product
- Strong chemical resistance
-
GasPruf E132 Reinforced Epoxy Coating
- Anticorrosive Coating: "Super-Duty" anticorrosive for in-service fuel storage tank interiors and roofs
- Repair Compound: Patching, leak sealing etc. above and below water or hydocarbon fuels
- Displaces water or hydrocarbons such as gasoline or diesel fuel from wetted surfaces
- Solvent Free
- 100% Solids
-
NE253 Novolac Colored Epoxy Acid Solvent Chemical Resistant High Build
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents
- High build for heavy duty traffic projects, chemical troughs and curbs
- Great for tanks and chemical spill areas for cement, masonry or brick
-
NE253SL Novolac Epoxy Colored Slurry Acid Chemical Resistant Floor Coating
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Resistant to high concentrations of acids and even some chlorinated solvents
- Applied at 1/16" thick for resurfacing traffic and chemical spill areas
- Excellent adhesion 425 psi
-
NE256 Novolac Clear Epoxy Acid Solvent Chemical Resistant Floor Coating
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Exceptional resistance to wide range of chemicals, solvents and acids
- Medium to High build for chemical spill areas, troughs, curbs and tanks
- Use as coating or chip/flake or aggregate systems
- Excellent adhesion 400 psi
-
SLR-20 Epoxy & Urethane Hybrid | High Elongation | Elastomeric | Impact & Tear Resistant
- High elongation and elastomeric
- High Resilience
- Tear Resistant
- Impact Resistant Flooring/ Coating
-
Spraythane FL Epoxy & Urethane Topcoat | Immersion Service | 100% Solids
- Tough and Flexible Resilience
- Immersion Service
- High Tear Resistant
- High Impact Resistant
- Combat Cavitation and Abrasion