Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing all 36 results
-
ACL 880 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Very High +/- 2% Precision Accuracy
- High Performance Digital Megohmeter Kit
- Alphanumeric LCD scale shows precise value
- Resistance range: 10³ - 10¹² ohms
- Test voltage range: <10 volt variable: 10³ - 9.9x103 ohms 10 volt ± 0.5 volts: 1.0x104 - 9.9x105 ohms 100 volt ± <5 volts: 1.0x10⁶ - 9.9x1012 ohms
- Accuracy: 10³ - 10¹⁰ ohms: < ± 2%, ± 2 counts 10¹¹ - 10¹² ohms: < ± 10%, ± 4 counts
-
4000 Acrylic Static Dissipative Clear Floor Finish
- Coverage is approximately 1500 – 2000 sq. ft. per gallon
- V.O.C. is less than 4%
- Solids are 20%± 5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
-
4010 Acrylic ESD Floor Stripper Concentrate
- Prepares floor for application of acrylic based ESD floor finishes
- No ammonia or phosphates
- Effective in hard or soft water
- Low 6% V.O.C.
- Zero tribogeneration
-
4018 Acrylic Dissipative Floor Finish
- Covers 2 coats of approximately 750-1000 sq ft per gallon
- VOC <4%
- 18% Solids, ±5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
-
4020 ESD Neutralizer Cleaner Concentrate
- Economical concentrate
- Dilute 1:128 cleaner to water
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
-
4030 ESD Neutralizer Cleaner Ready-to-Use
- Ready-to-use (also available as a concentrate, see 4020)
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
- Non-abrasive
-
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | Degreaser
- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
-
4100 ESD Restorer | Cleaner Concentrate
- Lengthens maintenance cycle
- Removes black heel marks
- Revitalizes gloss
- Surface resistivity: 107–109 ohms per square @100 volts
- High solids concentrate
-
4400 ESD Polyurethane Anti-Static Floor & Wall Paint | ANSI/ESD S20.20 | Zero VOC | Reinforcing Fibers
- Provides 100% anti-static control, even at low levels of humidity
- Conforms to ANSI/ESD S20.20-2020 when tested according to ANSI/ESD STM7.1
- Static dissipative: 105 to 108 ohms
- Water based with Zero VOC- 0 g/L
- High physical durability with reinforcing fibers
-
4600 Ultra Static Dissipative Clear Urethane Floor Finish
- High performance with exceptional static control
- For Use on vinyl, linoleum, or ceramic tile
- Offers high gloss, slip resistant & abrasion resistant finish
- More economical than other leading ESD floor finishes
- Resists powdering or flaking, even in dry condidtions
-
4800 Ultra II Static Dissipative Clear Urethane Floor Finish
- Coverage 1,500 - 2,000 sq'/gallon
- Strip cycle 12 -18 months
- Suitable to use on ESD tile, epoxy and concrete floors
- Surface resistivity: 107 - 109 ohms per square (average)
- Low voc
-
6210 ESD Polycoat Anti-Static Floor Paint | Dissipative | Clear | ANSI/ESD S20.20-2014
- Suitable for dissipative packaging outlined in ANSI/ESD S20.20
- Resistance: 10e6-10e9 ohms/sq when tested to ANSI/ESD STM11.11 88
- Dissipative Coating
- Water-based polyurethane with zero VOC
- Reduces tribocharging
-
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
6700C Premium ESD Static Conductive Anti-Static Floor Paint | 3 Colors | ANSI/ESD S20.20-2014
- Static conductive 10e3 - 10e6 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
-
8090 Mat Grounding Cord for ESD Floor Mats
- 10' coated high - strength tensile wire
- 10mm male stud connection to mats
- Ring-style termination for connecting to ground point
- 1 Met ohm resistor
-
CoatZF ESD Low-VOC Dissipative Clear Floor Finish | Static Control | ESD and Non-ESD Floors | 5 Gallon
- Zinc-free
- Static dissipative (1 x 10E6 to < 1 x 10E10 ohms) Coating - ANSI/ESD STM7.1 and ESD TR53
- Low tribocharging (<100 volts) coating - ANSI/ESD STM97.2
- 23% Solids- 2 Coat System** Reduces labor needed for initial install and on-going maintenance of the floor
- Hard, wear resistant – ASTM Standard D2134.93
-
EcoScrub Floor Stripper/ Degreaser
- Rinse-free formula
- Low foaming
- No environmentally toxic preservatives
- Low Odor
- Non caustic
-
ESD 640 Textured Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
- Resistant to acids, reducing agents, detergents, alcohols, hydrocarbons, mineral oil, amines and aldehydes
- Black, pebble-embossed textured surface
- Single layer .080" (2.032 mm) thickness
- Conductive, <1e6 ohms ANSI/ESD S7.1
- Operating Temperature -20F to 200F (-29C to 93F)
-
ESD Cleaning Buffing Pads | Use with Eco Scrub Degreaser
- Gray Scrub Pad provides great initial maintenance for light to moderate soiled floors
- Maroon Scrub Pad provides great maintenance for moderate to heavy soiled floors
- Use for both sides of scrub pad
- 1,500 square ft coverage
- Enhanced cleaning for ESD floor systems
-
ESD Conductive Anti-Fatigue Cushioned Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
- Dissipative 1/2" thick cushioned Anti-Fatigue Floor Mat
- Resistance point to point measures 1x10e5 – 1x10e7 ohms
- Dissipative cushioned under layer
- Smooth surface
- Beveled edges
-
ESD Conductive Floor Runner Protects Anti-Static Floors | Meets ANSI 20.20 | 48″W x 75’L
- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Great for Long Workbenches or easy cut to size with utility razor knife: 48"W x 75'L
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
-
ESD Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
- Protects ESD Flooring & ESD Paint Investment
- Solid Flat Surface Impervious to Damage from Chair Casters
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
- Lifetime Warranty ANSI S20.20 & ANSI S7.1-2005
-
ESD Copper Grounding Strips | ANSI/ESD S20.20 | Conductive Grounding For Floor Paint
- Safely ground floor coating systems
- Meet ANSI 20.20 grounding standards when used in conjunction with proper safety items
- Easy to Apply With Adhesive Backing
- We offer both 1/2" wide and 2" wide copper strips
-
ESD Vinyl Workspace & Chair Mat For Anti-Static Floors | Conductive ANSI 20.20 | Slip Resistant Surface
- Protects ESD Flooring & ESD Paint Investment
- Impervious to Damage from Chair Casters
- Great for workstations with Slip Resistant Textured Surface
- Conductive Anti-Static Protection
- Continuous and Permanent Path-to-Ground
-
GroundWorx Basics (SF) ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
- Water - based epoxy, matte finish
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Great low cost solution for concrete, wood, VCT Tile floors
- Extended working time - POT life 40+ minutes
-
GroundWorx Basics (SF) ESD Static Dissipative Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
- Water - based epoxy, matte finish
- Static Dissipative 10e6 - 10e9 ohms
- Great low cost solution for concrete, wood, VCT Tile floors
- Extended working time - 40+ minutes
- Quick turnaround - Light traffic 12 hours after application
-
GroundWorx Ultra (HB-97.2) ESD Static Conductive Epoxy Basecoat 100% Solids | Forklift Traffic | ANSI/ESD S20.20-2014
- Static dissipative or conductive high build epoxy electrical protection when used with the GroundWorx Ultra ESD Urethane Topcoat, which comes in either dissipative >1.0 x 10e6 ohms or conductive <1.0 x 10e6 ohms electrical resistance, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Great for high traffic, high wear commercial & industrial applications
- Use on Concrete, Wood and old VCT surfaces
- Moisture tolerant primer
-
GroundWorx Ultra (HB-97.2) ESD Urethane Top Coat | Static Dissipative or Conductive | ANSI S20.20-2014
- Optional Static conductive <1.0 x 10e6 ohms or Dissipative >1.0 x 10e6 and <1.0 x 10e9 ohms high performance electrical protection, limiting Static Charge Generation to <15 volts
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications with high build 14 mil system
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Primer
- Use on Concrete, Wood and old VCT surfaces
- Tough surface: impact resistance 140 psi and tabor abrasion test 25 mg loss
-
GroundWorx Ultra Elevated Moisture Epoxy Primer | For Use In GroundWorx Ultra Epoxy Systems | Zero VOC | Recoat in 5 Hours
- Protects ESD Coatings System from moisture related issues (withstands up to 8lbs of moisture vapor pressure)
- Apply when relative humidity is up to 95%
- Significantly reduce chance of concrete outgassing
- Great for high traffic (forklift & pallet jack), high wear commercial & industrial applications
- Conforms to ESDA, ANSI standard S20.20-2014 when used with the GroundWorx Ultra ESD Epoxy Basecoat and the companion Ultra Urethane Toopcoat
-
Heel Grounders for ESD Floor Protection
- Compliant with ANSI/ESD S97.2, ESD SP9.2, ANSI/ESD S20.20, IEC 61340-5-1
- Two layer heel rubber
- Black conductive exterior – 10e4 ohms
- White insulative interior prevents carbon marking on shoes
- 1 meg ohm resistor
-
ScrubWorx 20.20 ESD Floor Cleaner Concentrate
- Static Conductive
- High Activity Cleaner
- Micro-Cleans & Conditions
- Chemically Seals Tiles
- Simple to Use
-
Staticide ESD Mat Cleaner | Static Dissipative Neutral Cleaner | No Alkali or Ammonia
- Maintains the original resistivity of anti-static mats
- Works with our selection of Anti-Static Mats
- Cleans, rejuvenates and extends the life of the ESD mats
- Contains no alkali, ammonia or isopropyl alcohol
- No GHS classification, no REACH or RoHS SVHC
-
Staticide General Purpose | Static Control for All Surfaces
- Formulated for non-porous surfaces
- Works with our selection of Anti-Static Mats
- Exceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria
- Meets requirements for topical anti-stats as listed in DOD-HDBK-263
- Proven effective in relative humidity below 15%
-
Staticide Heavy Duty Low Lint Wipes
- 12" x 13" 1/4 fold, available in white and blue
- Use in conjunction with our Staticide ESD Mat Cleaner
- Hydroentangled 55% Cellulose/45% Polyester nonwoven wipe
- Suitable for ISO Class 6+ (Class 1000) cleanroom environments
- Binder-free; no chemical residue
-
ACL 395 Electrostatic Surface Resistivity ESD Test Meter | Compact Easy to Use
- Four color LED display segments (including warning stage)
- Half decades for greater accuracy
- Rubber rails for increased accuracy, durability and lower maintenance
- Dimensions: 2.8" x 5.1" x 1.4"
- Conforms to ASTM D257
-
ACL 800 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Temp | Humidity
- High Performance Digital Megohmeter Kit
- Measures Surface Resistivity, Resistance, Temperature, Humidity
- Measurement range for 10v resistance is from 103 to 106
- Measurement range for 100v resistance is from 106 to 1012
- Accuracy ±10% at 103 - 108