Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing all 36 results
-
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.
-
AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concrete Masonry Wood Plastic | Non-Yellowing
- Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
- Great for use as direct to metal corrosion resistant primer over steel
- Primer for concrete, masonry, wood, plastic surfaces
- Scratch Resistant
- Non-yellowing & UV Resistant Topcoat
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
- Penetrating Primer Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
-
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Composite Resin: Works well with fiberglass and carbon fabrics to create field-applied composites
- Mortar Repair: Effective epoxy resin for making epoxy strengthened mortar. Excellent for industrial applications such as pump bases
- 100% Solids
- Formulated with no volatile solvents
-
Chalky Wall Sealer and Clear Acrylic Primer
- Flexible and breathable
- Helps prevent efflorescence
- Protects wood from swelling, shrinking, or grain raising
- Seals and binds chalked surfaces; improves adhesion of topcoat
- May be used on previously painted and properly prepared surfaces
-
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | Apply Down to18°F | Quick Cure
- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Fast recoat 1-2 hours at 75°F & 50% R.H
- Cures down to 18°F dry and apply to 140°F
- High heat resistance up to 400°F dry
- Single component, easy to use
-
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colo
- No sagging on vertical walls up to 8 mils per coat (4 mils DFT)
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
-
E104 Primer Moisture Cured Urethane Zinc Rich Primer
- Excellent "wetting out" and adhesion to sound rusty steel
- Fast recoating within 4 hours at 75F
- Cures down to 25F on dry surfaces
- "Open" recoat window with proper cleaning
- Passed 1,500 hours in salt spray cabinet
-
E116 Rust Inhibitive Epoxy Primer
- Excellent rust preventing properties
- Excellent resistance to "under cutting"
- Good flexibility and abrasion resistance
- Long recoat up to 6 months
- Outstanding adhesion and "wetting out" ability
-
E139FL Flexible Epoxy Primer & Floor Coating | 60% Elongation | 100% Solids | Indoor & Outdoor
- Exceptionally flexible epoxy with 60% elongation
- High Build up to 50 mils thick per coat
- 100% Solids Commercial Epoxy
- Excellent Adhesion 450 psi
- Tough Abrasion resistant Only 6 mg loss (Tabor test) and 160 inch lbs Gardner variable impact test
-
E144 Epoxy Primer & Base Coat | Concrete Wood metal | Satin Finish | Flexible | 20 Colors | Solvent Base | Low Temp 40F
- Commercial Grade Epoxy Primer & Coating
- Versatile Works on Concrete, Wood, Steel
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life 3+ hours Means Easy Dip and Roll Application
- Apply low temp to 40F
-
E145 Polyamide Epoxy Block Filler | Concrete Block & Masonry Vertical Walls | High Build to 11.5 Mils DFT One Coat
- Excellent Adhesion to Vertical Block and Masonry Surfaces
- Excellent filling properties provide ideal "hold out"
- High Build Apply to 11.5 mils DFT (dry film thickness) One Coat
- Basecoat for high performing coating systems
- Hard film with high impact
-
E155CL Damp Condition Clear Epoxy Primer | Moisture Tolerant | Quick Cure | Low Temp 45° | Flexible
- May be Applied to Damp or Moist Concrete Surfaces
- Excellent as a tough, flexible and clear concrete primer and sealer
- When used as clear Concrete Sealer has very low permeability to keep water and chemicals out while reducing concrete dusting, spalling and deterioration
- Excellent Adhesion to Concrete
- Excellent Primer for use with high performance coating systems
-
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
-
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy to Apply | Low VOC
- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
-
E2.8 Poly-Chemcure Primer | Fast Recoat | Low-Temp | OEM/Steel Fabricator
- High performance primer can be prepared on carbon steel, galvanized steel and aluminum
- Recoating in 90 minutes is possible for maximum productivity
- No induction time and longer pot life will improve productivity
- A smooth, sandable primer at 3 mils DFT over abrasive blasted or power tool cleaned substrate is needed for additional corrosion resistance
- Application by brush and roller, in addition to spraying, may be necessary
-
E211 Epoxy Primer & Sealer
- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Very low permeability-tight sealed film
- Used as a primer and/or finish coat
- USDA Approvable
-
E332 Polyester Polyurethane Coating| Clear | Topcoat | High Gloss | Chemical, Impact & Abrasion Resistant
- Excellent Chemical Resistance
- High Gloss
- Excellent Weather Resistance
- Highly Resistant to Abrasion and Impact
- Non-chalking and non-yellowing
-
E5013 Fast Set Clear Epoxy Primer WB Concrete | Wood | Masonry
- Versatile product good on concrete, masonry, wood surfaces
- Quick 4-6 hour Recoat for same day projects
- Excellent as clear primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 2 hour pot life
-
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
- Versatile product good on concrete, masonry, wood surfaces
- Available in Clear and 20 Colors To Match With Topcoat
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 1 - 1.5 hour pot life
-
E6470 Textured Primer | 100% Acrylic Latex | High Build Elastomeric | Concrete Masonry Stucco Wood
- Primer and Texture in one
- Allows matching of surrounding textured surfaces for repairs
- Superior adhesion to virtually any surface
- Excellent surface adhesion
- Fast drying
-
E7075 Smooth Primer | 100% Acrylic Latex | Stain Blocking | Concrete Stucco Wood Metal Plywood
- Superior adhesion to virtually any surface
- Blocks water soluble difficult stains such as tannins, rust and smoke damage
- Excellent surface adhesion
- Fast drying
- Breathable
-
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassin
- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
-
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
-
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 100% Solids
- Low Viscosity Epoxy
- Increases Adhesion of Coating System to Metal Surfaces
- Tough, Water Resistant Coating
- 100% Solids
-
EZ- Bond Primer | Excellent Adhesion & Corrosion Protection | Self- Leveling | Primer for Galvanized Metal, Aluminum Concrete, Drywall, Masonry, Fiberglass, Wood And Stucco
- Used on practically any surface
- Excellent Adhesion
- Corrosion Protection
- Self-Leveling Product
- Eco-Friendly Formula
-
H20 HyperPRIME Epoxy Quick Cure Bonding Primer | Low Temp 45°F | 3 Hr Recoat
- Excellent Substrate Penetration with superior adhesion 450 psi
- Quick Cure 3 Hour Recoat Time - great for 1 day floor coating systems
- Great for concrete, wood and metal surfaces
- Helps protect Against Coating Damage from Outgassing of Concrete
- Fantastic freeze/thaw stability (passes 3+ cycles; -5 C to 23 C)
-
IronBack Steel Primer | Convert, Encapsulate, Stop Rust | Topcoat With Water & Oil Based Paint
- Reduce or eliminate grinding and dangerous sandblasting
- Converts and encapsulates steel to prevent future rusting
- Compatible with water and oil-based paints
- Contains no VOCs. Non-toxic. Environmentally friendly
- Converts rusted surfaces to stable black metal.
-
NE255P Novolac Epoxy Primer/Sealer Flexible Crack Bridging Chemical Resistant
- Excellent crack bridging, flexible high build primer eliminates need to repair hairline cracks in chemical exposure areas
- Use for priming light to medium duty secondary containment
- Tough, durable coating for surfaces exposed to vehicle traffic
- Outstanding abrasion and impact resistance with only 5 mg loss Taber Abrasion test and 100 inch lbs Gardner Impact Test
- Excellent adhesion 450 psi
-
NE257P Novolac Epoxy Colored Primer Acid Solvent Chemical Resistant Fl
- Excellent primer companion to our NE253 and NE253SL Novolac Epoxy topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 375 psi
- Long working time with 1 to 3 hour POT life
-
NE258P Novolac Epoxy Clear Primer Acid Solvent Chemical Resistant Floor Coating
- Excellent primer companion to our NE256 Novolac Clear Epoxy topcoat
- Helps reduce air release generation when applying higher solids novolac topcoats
- Outstanding Spill and Splash Acid, Solvent, Chemical surface protection
- Resists wide range of chemicals, solvents and acids
- Excellent adhesion 365 psi
-
Plugger Universal Acrylic Primer | Rust & Corrosion Resistant | For Metal, Concrete, Stucco, Masonry, Painted Surfaces
- Excellent Hide
- Rust Inhibiting and Corrosion Resistant for metal surfaces
- Fast Drying
- Interior and Exterior Uses
- Galvanized Metal and Aluminum Applications
-
Rubber-Lok Liquid Synthetic Rubber | Ultra Flexible 1000% Elongation | Stops Leaks | Paintable | UV Resistant | Concrete Stucco Masonry Wood Metal Asphalt
- Ultra Flexible 1000% Elongation
- Waterproof Membrane
- Great Repair & Coating for Roofs, Decks, Foundation walls, Gutters, Planter boxes
- Rust & Corrosion Control
- UV Resistant
-
Synthetic Shellac Primer Epoxy Fortified | Stain Odor & Tannin Blocker | Anti-Microbial | Wood, Drywall, Fiberglass, Stucco, Galvanized Metal
- Stops Tanin Bleed
- Stain Blocker
- Easy To Apply
- Blocks Smoke and Water Damage
- Resists Microbial Growth