Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing 1–50 of 114 results
-
10x Polyurea Interior Control Joint Filler | Quick Cure | Cold Temperature Apply Down To 0F
- Quick Back in Service
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits
- High Shore Hardness for superior protection and support to joint edges
- Cold Application down to 0F
- Rapid curing
-
3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F
- Offers load transfer across control joints for good protection of edges
- Back-in-Service "Drive-Over" in 30 to 60 minutes
- Longer working time than the 3004 Fast Set Polyurea
- 5-8 Minute Gel Time @ 77°F
- Meets USDA Requirements for incidental food contact
-
3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F
- Quick Back-in-Service "Drive-Over" in only 20-30 minutes
- Offers load transfer across control joints for good protection of edges
- Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit)
- Tack Free only 2-3 minutes
- Meets USDA Requirements for incidental food contact
-
3246 Polyurea Flexible Expansion Joint Filler | Quick Cure | Exterior Interior | Low Temp -20°F | Elongation 600%+
- Quick set with "Drive-Over" in 30 to 45 minutes
- High Density Polyurea
- Very Flexible with Elongation ASTM D124 >600%
- Meets USDA Requirements for intermittent contact
- Meets FAA P605 – for airfield joints
-
4010 Acrylic ESD Floor Stripper Concentrate
- Prepares floor for application of acrylic based ESD floor finishes
- No ammonia or phosphates
- Effective in hard or soft water
- Low 6% V.O.C.
- Zero tribogeneration
-
4020 ESD Neutralizer Cleaner Concentrate
- Economical concentrate
- Dilute 1:128 cleaner to water
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
-
4030 ESD Neutralizer Cleaner Ready-to-Use
- Ready-to-use (also available as a concentrate, see 4020)
- Neutral pH 7.2
- Low foam - no streaking formula
- Non-toxic and biodegradable safe for sewage & septic systems
- Non-abrasive
-
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | Degreaser
- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
-
4100 ESD Restorer | Cleaner Concentrate
- Lengthens maintenance cycle
- Removes black heel marks
- Revitalizes gloss
- Surface resistivity: 107–109 ohms per square @100 volts
- High solids concentrate
-
6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F | 100% Solids
- May be applied in damp and wet conditions where wash-down of areas is problematic
- Withstands up to 15-18 psi hydraulic vapor pressure
- Provides protective attractive color coat epoxy flooring system
- Excellent working properties
- Exceptional corrosion protection of both concrete and steel
-
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
-
800 Slow Set Polyurea Adhesive Sealant & Caulk
- Back in-service 1 - 1.5 hours, recoat 30-45 minutes, full cure 6-8 hours
- High chemical & fuel resistance
- Highly adhesive to many substrates
- Good working time, quick gel time 6-10 minutes, trowel-able
- Cartridge or pump dispensed
-
830 Fast Set Polyurea Repair | Joint Sealant | Caulk | Adhesive | No Sag Walls | Concrete | Steel | Wood
- Vertical hold directly from the cartridge or static mixer
- Can be sprayed over with polyurea in a short time
- High chemical resistance, fuel resistant,
- Highly adhesive to many substrates
- Cold weather application down to -20F
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.
-
AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concrete Masonry Wood Plastic | Non-Yellowing
- Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
- Great for use as direct to metal corrosion resistant primer over steel
- Primer for concrete, masonry, wood, plastic surfaces
- Scratch Resistant
- Non-yellowing & UV Resistant Topcoat
-
AEROSIL R 202 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 22 lbs (10 kg) | Evonik
- Great thickening agent to wide range of coatings including epoxy and polyurethane coatings
- Allows coatings to be used as great concrete crack, hole, joint and spall repairs
- When mixed into fast cure epoxy, makes for very quick repairs
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
-
Bio-Chime E390 Joint Sealant & Flexible Coating | Expansion Joints | Apply to 2″ Thick | Elastomeric | VOC Free
- Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures
- Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure
- Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications
- Durable for foot traffic environments
- Flexibility helps resist impact and substrate movement
-
Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and Overhead Application | Can Apply Underwater
- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
-
Bio-Fix E913 | Quick Epoxy Repair | Above or Below Water Application
- Adhesive: Excellent all-purpose adhesive for use above and below water with excellent temperature resistance
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Pressure Transfer Compound: Rapid curing and high build for quick fix dent filling. Acts as pressure transfer material for FRP repairs
- Above or Below Water Application
- Quick Curing
-
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
-
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
- Penetrating Primer Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
-
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Composite Resin: Works well with fiberglass and carbon fabrics to create field-applied composites
- Mortar Repair: Effective epoxy resin for making epoxy strengthened mortar. Excellent for industrial applications such as pump bases
- 100% Solids
- Formulated with no volatile solvents
-
Chalky Wall Sealer and Clear Acrylic Primer
- Flexible and breathable
- Helps prevent efflorescence
- Protects wood from swelling, shrinking, or grain raising
- Seals and binds chalked surfaces; improves adhesion of topcoat
- May be used on previously painted and properly prepared surfaces
-
CMW 8000 Lithium Moisture Vapor Barrier and Concrete Densifier
- Blocks moisture vapor and hydrostatic pressure reducer
- Used in joints to stop vapor/water pressure damage to joint materials
- Permanent - becomes part of the concrete
- Stops minute fracture weeping of moisture (may require several coats)
- In areas of high humidity and salt air - reduces corrosive activity to rebar within concrete
-
E-Poly Pigment For All Floorguard Epoxy & Polyaspartic Coatings | 12 Colors
Starting at $52.00 -
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | Apply Down to18°F | Quick Cure
- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Fast recoat 1-2 hours at 75°F & 50% R.H
- Cures down to 18°F dry and apply to 140°F
- High heat resistance up to 400°F dry
- Single component, easy to use
-
E1000 Epoxy Concrete Repair Kit | Holes to 1″ | Cracks | Spall | 3 Color
- Make quick, permanent repairs to concrete
- Patch cracks, spalled concrete and potholes
- Outstanding adhesion to concrete
- Excellent chemical, abrasion and impact resistance
- USDA approved for food processing plants
-
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colo
- No sagging on vertical walls up to 8 mils per coat (4 mils DFT)
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
-
E104 Primer Moisture Cured Urethane Zinc Rich Primer
- Excellent "wetting out" and adhesion to sound rusty steel
- Fast recoating within 4 hours at 75F
- Cures down to 25F on dry surfaces
- "Open" recoat window with proper cleaning
- Passed 1,500 hours in salt spray cabinet
-
E105M Epoxy Mortar Concrete Resurfacer & Patch Kit
- Economical, Easy resurfacing old and damaged concrete floors
- Compressive Strength 8,400 psi ASTM D695
- Heat Deflection Temp 131.7F ASTM D648
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
-
E110M Epoxy Mortar Concrete Premium Resurfacer & Patch Kit
- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- 10% greater coverage/unit vs E105M Epoxy Mortar
- Compressive Strength 11,150 psi ASTM D695
- Heat Deflection Temp 158.9F ASTM D648
-
E116 Rust Inhibitive Epoxy Primer
- Excellent rust preventing properties
- Excellent resistance to "under cutting"
- Good flexibility and abrasion resistance
- Long recoat up to 6 months
- Outstanding adhesion and "wetting out" ability
-
E126CW Cold Weather Epoxy Mortar Concrete Resurfacer & Patch Kit 35°F to 80°F
- Great for Cold Weather & Cold Freezer Storage
- Easy resurfacing old and damaged concrete floors
- Premium Tough, Durable, Chemical Resistant Protection
- Compressive Strength 11,284 psi ASTM D695
- Heat Deflection Temp 149.9F ASTM D648
-
E128AF Arctic Epoxy Mortar Concrete Patch Kit | Cold Condition -10°F to 40°F
- Tough, durable cold winter weather Concrete Patch and Repair
- High Build Resurfacing 1/8" to 1/4"
- Patching up to 2" thick
- Excellent extreme cold condition patching -10°F to 40°F
- Great For Freezer, Cold Storage and Cold Winter Patching
-
E130A Oil Contaminated Concrete & Asphalt Epoxy Mortar Patch Kit/Resurfacer
- Great for patching and repairing oil contaminated and damaged concrete
- Can be used to patch and repair asphalt surfaces
- Crack. holes and general surface repairs
- Apply up to 1/4" per coat
- Excellent abrasion and impact resistance
-
E139FL Flexible Epoxy Primer & Floor Coating | 60% Elongation | 100% Solids | Indoor & Outdoor
- Exceptionally flexible epoxy with 60% elongation
- High Build up to 50 mils thick per coat
- 100% Solids Commercial Epoxy
- Excellent Adhesion 450 psi
- Tough Abrasion resistant Only 6 mg loss (Tabor test) and 160 inch lbs Gardner variable impact test
-
E139JF Flexible Joint Sealant | Expansion Joint | 100% Solids
- Flexible interior joint filler and sealant
- 100% solids with 0 VOC
-
E1409CL Moisture Vapor Barrier Epoxy Sealer Primer For Concrete ASTM F3010
- Helps reduce effects of moisture vapor transmission
- Control moisture vapor emission rates up to 20 lb/24hr/1000 sq' (ASTM F1869)
- 100% solids with 0 voc
- Low odor
- Easy to apply, most projects require only one coat
-
E144 Epoxy Primer & Base Coat | Concrete Wood metal | Satin Finish | Flexible | 20 Colors | Solvent Base | Low Temp 40F
- Commercial Grade Epoxy Primer & Coating
- Versatile Works on Concrete, Wood, Steel
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life 3+ hours Means Easy Dip and Roll Application
- Apply low temp to 40F
-
E145 Polyamide Epoxy Block Filler | Concrete Block & Masonry Vertical Walls | High Build to 11.5 Mils DFT One Coat
- Excellent Adhesion to Vertical Block and Masonry Surfaces
- Excellent filling properties provide ideal "hold out"
- High Build Apply to 11.5 mils DFT (dry film thickness) One Coat
- Basecoat for high performing coating systems
- Hard film with high impact
-
E155CL Damp Condition Clear Epoxy Primer | Moisture Tolerant | Quick Cure | Low Temp 45° | Flexible
- May be Applied to Damp or Moist Concrete Surfaces
- Excellent as a tough, flexible and clear concrete primer and sealer
- When used as clear Concrete Sealer has very low permeability to keep water and chemicals out while reducing concrete dusting, spalling and deterioration
- Excellent Adhesion to Concrete
- Excellent Primer for use with high performance coating systems
-
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
-
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy to Apply | Low VOC
- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
-
E2.8 Poly-Chemcure Primer | Fast Recoat | Low-Temp | OEM/Steel Fabricator
- High performance primer can be prepared on carbon steel, galvanized steel and aluminum
- Recoating in 90 minutes is possible for maximum productivity
- No induction time and longer pot life will improve productivity
- A smooth, sandable primer at 3 mils DFT over abrasive blasted or power tool cleaned substrate is needed for additional corrosion resistance
- Application by brush and roller, in addition to spraying, may be necessary
-
E211 Epoxy Primer & Sealer
- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Very low permeability-tight sealed film
- Used as a primer and/or finish coat
- USDA Approvable
-
E332 Polyester Polyurethane Coating| Clear | Topcoat | High Gloss | Chemical, Impact & Abrasion Resistant
- Excellent Chemical Resistance
- High Gloss
- Excellent Weather Resistance
- Highly Resistant to Abrasion and Impact
- Non-chalking and non-yellowing
-
E343 Quick Fix Concrete Repair Epoxy Urethane Patch Kit | 10 Min Light Traffic | Low Temp 20°F
- Extremely Quick full cure 1 hour
- Tough Durable Repair as hard as concrete
- Good for use interior & exterior repairs
- Low viscosity Product for Outstanding Adhesion and Deep Penetration of Cracks
- Comes in both small and large patch kits including silica sand and liquid only options
-
E500MR BEAN-e-doo Mastic Remover | US Grown Soybean Technology | Remove Asbestos Black Mastic Carpet & Tile Adhesives | Low VOC | Low Odor
- Safely Remove Asbestos, Mastics, Adhesives
- Easy-to-Use
- Fast Acting
- Low, Non-Offensive Odor
- Non-Caustic