Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing 51–90 of 90 results
-
Mi-T-M Hot Water Pressure Washer
- Pump: Preset stainless-steel and brass unloader valve. Forged brass manifold. Thermal relief valve. Low pressure detergent injector.
- Components: Top-fired powder coated heat exchanger. No 1 or No2 diesel or kerosene fired burner (Not approved for bio-fuel)
- Miscellaneous: Temperatures rise 150F above ambient, maximum outlet temperature is 200F
- Quick connect nozzles - 0°, 15°, 25° and 40°
- 2 x 50-foot x 3/8-inch steel wire-braided high pressure hose with quick connects
-
Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml
- Dual-Component Applicator For 10.5 Oz / 300ml Twin Cartridges In 1:1 Or 2:1 Mix Ratio 300 ml x 150 ml
- Quick Application Of Polyurea, Epoxy, Urethane Based Products
- Easy Application Of Our’ Twin Cartridge Polyurea Products 3246, 3004, 4034, 830, E5830
- Thrust Ratio Of 26:1 For Use With Very High Viscosity Materials
- Two-piece stamped steel friction plate
-
Newborn 515-SP Vertical Dual Component Applicator Cartridge Gun
- Manual, Smooth Rod
- 20:1 Thrust Ratio
- 3.9 lbs / unit
- Variable Mix Ratios
- Cuts the spout of caulk tubes
-
Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
- Easy Application Of Twin Cartridge Polyurea's 3246, 3004, 4034, 830 made by ASTC Polymers
- Thrust Ratio 26:1 For Very High Viscosity Materials
-
Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio
- 2.5" cylinder generates 490 lbs nominal thrust at @100 psi
- Offers quick application with smooth, even product flow
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
-
Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml
- Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio
- Powerful 4" cylinder generates nominal 1,100 lbs thrust @100 psi
- Offers quick application with smooth, even product flow
- Multi-Ratio Easily Converts in just seconds with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges
- Quickly Apply Polyurea, Epoxy, Urethane Products
-
OUTDOOR UV STABLE FLAKE Fan Deck Samples | 36 Color Blends | Marketing Tool
- Great Sales Sample and Selling Tool
- Great Way To Visualize all 36 different Outdoor UV Stable Factory & Hybrid flake color blend combinations
- Quickly Show Customers How You Upgrade Their Outdoor Project with UV Stable Flakes
- Actual Outdoor UV Stable Flake Samples
-
Pebble Bond Trowel Slick | Surface Lubricant for River Rock & Pebble Flooring
- Reduces drag for smoother troweling
- Helps prevent epoxy from sticking to trowel
- Creates a more uniform pebble finish
- Improves control during installation
- Easy to use for DIY & professional applications
-
Phenolic Core Roller Covers 9″ | Case of 12
- For spreading and leveling mastics, anti-slip floor coatings, and other heavy coatings as recommended by manufacturer
- Professional phenolic roller resists water and solvents
- Available in 9" size
- Comes in package of 12 Roller Covers
-
Polybead Anti-Slip Additive | Least Change Appearance | Easy to Clean & Use | 2 Grit Sizes
- Adds skid resistance & texture profile to a surface
- Least Change in Surface Appearance & Easiest to Clean
- Very small amounts required
- Use with Epoxy, Polyaspartic, Urethane, Polyurethane and most coatings
- Lightweight aggregate, blends well into coating
-
Pro 7″ Fence & Deck Stain Brush | Use with EXPERT Stain Products
- Professional-level results effortlessly achieved
- Save time and effort on staining projects
- Versatility for various staining needs
- Comfortable grip for extended use
- Hassle-free cleanup
-
Quartz Granule Fan Deck Samples | 25 Factory Blended Colors | Marketing Tool
- Great Sales Sample and Selling Tool
- Great Way To Visualize 25 different quartz granule color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using Quartz Granules
- Actual Quartz Granule Grade 40-S Samples
-
Quartz Granule Sample Kit With Real Granules | 40 Solid Colors | Grade Size 40-S & 25-A Examples
- Great Sales Sample and Selling Tool
- Actual Loose samples of all 40 solid colors available
- Samples of both size granule options, Grade 40-S and Grade 25-A
- Great way to help create and visualize your own unique custom quartz blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Quartz Granules
-
Quartz Granules Color Samples (1 or 3 Pack)
- Real Quartz Granules- Same material used in our full-size blends
- Accurately evaluate color, size and texture before ordering bulk
- Ideal for epoxy and polyaspartic coating projects
- Compare coloring in your actual lighting
- Contractor & DIY friendly
-
Random Cut Glitter Flakes for Epoxy, Polyaspartic, Urethane Coatings
- Adds Bright Diamond Like Sparkle Appearance to Floor
- Mix with Any Flake Blend Before Broadcasting into Floor
- Easy to use with typical mix ratio +/- 3% to 5% Random Cut Glitter
- 12 Beautiful Colors to Choose From
- Provides a delicate and radiant shimmer that brings timeless elegance to every detail
-
Reflective Glitter Powder Sample Kit With Actual Glitter | All 12 Color Options
- Great Sales Sample and Selling Tool
- Actual Loose samples of all 12 colors available
- Great way to help create and visualize your own unique custom blend
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Reflective Glitter Powder
-
Silica Sand Anti-Slip Additive For Epoxy, Polyaspartic, Polyurethane,
- Adds very tough skid resistance & texture profile to a surface
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- Comes in 5 mesh sizes
-
Spike Shoes – Flexible | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
Starting at $175.00 -
Spike Shoes | Economical | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
Starting at $34.99 -
Spike Shoes | Walk on Wet Epoxy, Polyaspartic, Urethane Floor Coatings
Starting at $45.99 -
Spiked Roller Cover Metal (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
- Sturdy metal construction
- 13/16" Long Metal spikes
- Available in both 9" and 18" sizes (does not include handle)
- Helps remove gas bubbles that can form in floor coatings for a variety of reasons
-
Spiked Roller Cover Plastic (Porcupine) 9″ and 18″ Release Trapped Gas Bubbles
- Sturdy plastic construction
- Long 13/16" plastic spikes
- Available in both 9" and 18" sizes (does not include handle)
- Effectively removes gas bubbles that can form in floor coatings for a variety of reasons
-
Static Mixer 1/2″ x 32 Element | For Epoxy & Polyurea Dual Cartridge Kits | US Saws Polymer Pump
Starting at $80.00 -
Static Mixer For E5830 Joint Filler Dual Cartridge Concrete Repair Kit
Starting at $30.00 -
SX-20005-5 Polyethylene Tank 6.5 Gallons for US SAWS Polyurea Joint Fi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20005-6 Polyethylene Tank Cover 6.5 Gallon for US SAWS Polyurea Joi
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20017 Tank Warmers For Cold Weather for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20111 Static Mixer Retaining Nut (5) & Manifold Thread (1) US SAWS
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20111 Static Mixer Retaining Nut for US SAWS Polyurea Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20116 Manifold With Grease Fittings for US SAWS Polyurea Joint Fill
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-20201 Replacement Pump for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-21000 Polyurea Pump 2:1 Ratio Conversion Kit for US SAWS Polyurea J
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX-21023 Power Inverter 1200W for US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX20150 US SAWS Dual Component 2 Man Polyurea / Epoxy Joint Filler Pump
- Reduce Labor Costs & Significantly Increase Application Speed on Concrete Floor Projects
- Reduce Material Waste With More Controlled Material Flow
- The dispensing wand has a variable speed control, and start/stop control
- Production rates to 5,000 lineal joint filling feet per day (new concrete)
- Allows Quick Joint Filling vs Cartridge Application
-
SX20410 Polymer Pump Line For US SAWS Polyurea Joint Filler Pumps
- Reduce Labor Costs & Significantly Increase Application Speed
- Production rates of up to 4,000 to 7,000 lineal feet per day
- Reduce Material Waste
- Allows Quick Joint Filling vs Cartridge Application
- Works With Both Polyurea and Epoxy 2 Part Joint Fillers
-
SX20552 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump
- Reduced Labor Costs with newly redesigned, low profile one man operation
- Significantly Increase application Speed on Large Concrete Floor Projects
- Allows Quick Joint Filling vs Cartridge Application
- Fill up to 5,000 Lineal Feet of joints (new concrete) in one day!
- Left and right handed operation are easy with the double-sided “T” handle
-
Terrazzo, Hybrid & Mica Enhanced Stone Flake Fan Deck Samples |Popular Factory Blended Colors | Marketing Tool
Starting at $47.00 -
Vinyl Flake Fan Deck Samples | 38 Popular Factory Blended Colors | Marketing Tool
- Great Sales Sample and Selling Tool
- Great Way To Visualize 32 different vinyl flake color blend combinations
- Quickly Show Customers How You Can Make Their Floor Look Great using decorative Vinyl Flakes
- Actual Vinyl Flake 1/4" Samples
-
ACL 395 Electrostatic Surface Resistivity ESD Test Meter | Compact Easy to Use
- Four color LED display segments (including warning stage)
- Half decades for greater accuracy
- Rubber rails for increased accuracy, durability and lower maintenance
- Dimensions: 2.8" x 5.1" x 1.4"
- Conforms to ASTM D257
-
ACL 800 Digital Electronic Megohmmeter ESD Resistance | Resistivity | Temp | Humidity
- High Performance Digital Megohmeter Kit
- Measures Surface Resistivity, Resistance, Temperature, Humidity
- Measurement range for 10v resistance is from 103 to 106
- Measurement range for 100v resistance is from 106 to 1012
- Accuracy ±10% at 103 - 108