Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing 1–50 of 71 results
-
4G Surface Guard: Walls & Floors | Advanced Protection | Easy Application | Fast Drying
- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.
-
Advanced Waterproofer Multi-Surface 10 Yr Water Repellent
- Long lasting and virtually indestructible water repellent protection
- Penetrates deep and will not wear off with heavy vehicle or foot traffic
- Prevents growth of mold & mildew
- Does not change the appearance of the surface
- Stain resistant to oil, gas and anti-freeze
-
Bio-Dur E560 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 30-40 mils DFT One Coat | 100% Solids
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Bio-Dur E561 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 40-60 mils One Coat | 100% Solids
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Bio-Dur E563 Epoxy Coating for Above Or Below Water Application | Heavy Duty | Quick Curing | Solvent Free
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and Overhead Application | Can Apply Underwater
- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
-
Bio-Fix E913 | Quick Epoxy Repair | Above or Below Water Application
- Adhesive: Excellent all-purpose adhesive for use above and below water with excellent temperature resistance
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Pressure Transfer Compound: Rapid curing and high build for quick fix dent filling. Acts as pressure transfer material for FRP repairs
- Above or Below Water Application
- Quick Curing
-
Bio-Gard E251 Heavy Duty Epoxy Coating | Dry or Damp Surfaces | VOC Free | 100% Solids | Air Shippable
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water. Anticorrosive barrier for in-service fuel storage tank interiors and roofs.
- Industrial Maintenance: General purpose chemical resistant lining for waste neutralization pits, secondary containment,etc. Makes an excellent floor and stair coating when used with entrained or broadcast grit.
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste. Especially useful as the final gloss coating rebuilt with other TFT products
- 100% Solids
- Ships Non-Hazardous
-
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
-
Blok-lok Silane Siloxane Vertical Wall Water Repellent | Concrete Brick Block Stucco
- Labor and material water repellent warranty available for 5 years
- Easy to use Concentrates available that saves money, time and easier on the environment!
- ASTM tested for superior performance in stopping water and salt damage
- 100% Eco-friendly: low VOC
- Excellent mold and mildew inhibitor
-
Brick Sealer & Water Repellent – Breathable Silane/Siloxane Protection for Brick, Masonry & Pavers
- Stops Wind Drive Rain From Coming Through Brick Walls
- Protects Mortar From Moisture Damage
- Tough, Durable Clear Finish Does Not Change Look of Surface
- UV Resistant - Will not yellow
- Covers up to 150 sq'/gallon Depending on Porosity of Surface
-
CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow
-
CLEAR-SEAL 100% Urethane Super Premium Sealer| Low Gloss
- Excellent Impact and wear resistant
- Resists hot tire pick-up for vehicular applications
- Performance Additive Available for Even Better Performance
- Excellent Chemical and Stain Resistance
- Resists UV rays - won't yellow
-
CLEAR-SEAL High Gloss Acrylic Urethane Sealer
- Heavy duty Impact and wear resistant
- Non-yellowing formulation
- Resistant to stains, acids, bases, gasoline, alcohol and oil (vegetable and motor)
- Low odor
- Non-hazardous
-
CLEAR-SEAL Low Gloss Acrylic Urethane Sealer
- Heavy duty Impact and wear resistant
- Non-yellowing formulation
- Resistant to stains, acids, bases, gasoline, alcohol, oil (vegetable & motor)
- Resists UV rays - won't yellow
- Environmentally-friendly, low odor, Non-hazardous
-
CMW 8000 Lithium Moisture Vapor Barrier and Concrete Densifier
- Blocks moisture vapor and hydrostatic pressure reducer
- Used in joints to stop vapor/water pressure damage to joint materials
- Permanent - becomes part of the concrete
- Stops minute fracture weeping of moisture (may require several coats)
- In areas of high humidity and salt air - reduces corrosive activity to rebar within concrete
-
Concrete Sealer and Water Repellent Premium Grade Clear Protection
- Penetrates deep into the surface to help keep water out
- Great winterizing agent – Protects concrete from icing and salt infiltration
- Stain resistant to oil, gas and anti-freeze
- For All Vertical and Horizontal Unpainted Concrete Surfaces
- Tough, Durable Natural Looking Clear Finish Does Not Change Look of Surface
-
Cool Coat Clear Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools The Surface
- Clear protection - allows underlying surface color to be seen (it "can" be slightly hazy over dark accent colors only)
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Lower Cooling Costs in the Summer When Applied to Exterior Walls & Roofs
- Cool painted metal surfaces like metal handrails from the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
Cool Coat Tint Base Thermal Barrier Heat Reflective Insulating Paint (Custom Colors) | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Custom Color Locally Using One of Our 3 Tint Bases
- Create most colors with our Pastel, Deep and Accent Tint Base options
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
-
Cool Coat White Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Ready-to-Use White Color - Flat Finish
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
E10 Floor & Deck 100% Acrylic Coating | 22 Colors | Concrete, Masonry, Wood | Quick Dry | Satin Sheen | UV Resistant
- Fast Drying Water Based Acrylic Formula
- Satin Sheen Decorative Finish
- UV and Weather Resistant Coating
- Low VOC with Easy Clean Up
- Chemical Resistant Coating
-
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | P
- No sagging on vertical walls up to 12 mils per coat
- Good chemical and abrasion resistance
- Works well on underwater concrete decorative surfaces including pools and water features
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
-
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
-
E25 Water Based Epoxy Primer | Primer for E28 Cool Life | 6 Color/Tint Options | Concrete
- Excellent Primer for the E28 Cool Life Deck Coating
- 6 Color/Tint Base Options
- Long Pot Life
- Quick 6 Hour Recoat Time
- Water based - Low VOC
-
E28 Cool Life Deck Coating | Infrared Heat Reflective Technology in 22 Colors | 100% Acrylic | Concrete Wood Masonry Metal | Chemical Resistant
- Up to 25-30% Reduction in Surface Temperature using one of 22 colors available
- Infrared Heat-Reflective Technology
- Great for Pool Decks, Patios, Porches Concrete, Masonry, Wood
- UV Resistant
- Slip resistant surface - passes ASTM D2047-82
-
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Cold temperature application down to 45F
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
-
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Cold temperature application down to 45F
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
-
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Stable
- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use One Part with Long 3-5 Hour Pot Life
-
E5030CL Urethane Clear Sealer / Topcoat WB
- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
-
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
-
E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeable
- Outstanding durability with impact resistance of 120 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
-
E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors – Walls
- May be applied on wet or under water surfaces
- Self-priming on steel and on most concrete applications
- Cold temperature cure down to 35F
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
-
E64 Rain Shield Elastomeric | Flexible 400% Elongation | 100% Acrylic | Ceramic Sphere Technology | Masonry Stucco Wood Metal Concrete | 800+ Colors
- Flexible Up to 400% elongation ASTM D412-87
- Resists Wind Driven Rain (Passes ASTM E96, TTC-555-B)
- Breathable, Thermal Barrier
- Excellent Adhesion
- Flexible: Performs very well in hot and cold environments
-
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding Adhesion
- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
-
E8875 Underseal Water Proofer | 100% Acrylic Elastomeric | 500% Elongation | Composition, Bitumen, APP, TPO, Hypalon, Concrete, Metal Roofs | Planter Boxes | Retaining Walls | Shower Pans
- Excellent Roof Coating, Planter Box & Shower Pan Waterproofing
- Up to 500% Elongation
- Primes and Seals
- UV Resistant
- Creates a Water Barrier
-
Floor-lok Concrete Floor Sealer and Curing Aid Concentrate
- Warranty available for 1 year
- Easy to use Concentrate
- 100% Eco-friendly: low VOC
- Stain resistant to oil, gas and anti-freeze
- Floorlok does not alter surface appearance & UV resistant - will not yellow
-
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
- Prevents growth of mold and mildew
- Prevents absorption of water
- Stain resistant
- Will not yellow
- Easy to use – Same day, two coat application
-
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, low gloss appearance
-
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
- Tough, durable topcoat for epoxy floor coatings
- Excellent chemical and abrasion resistance
- Exceptional impact resistance
- Aliphatic, UV Stable and will not yellow
- Beautiful clear, semi-gloss appearance
-
Hydro-Lok™ Fabric Super Hydrophobic Liquid Repellent
- Excellent liquid and stain protection for wide range of materials and surfaces
- Easy to use sprayer (non pressurized) - one component - no mixing
- 100% Eco-friendly: low VOC 7 g/L, low odor, non-flammable
- Dries completely clear - no haze
- Excellent mold and mildew inhibitor
-
Life Deck 1K Acrylic Urethane Blend Sealer
- Helps Protect Decorative Concrete Surfaces
- Long lasting clear protective finish
- Repels Oil, Grease & Water
- Easy to Clean & Maintain
- Interior & Exterior Use
-
Mend-Con RTU Concrete Repair | Wet Conditions & Underwater | Vertical No Sag | Quick Cure | Paintable | Also Stucco | Wood | Metal
- Repair in Wet conditions - Apply Underwater
- Great for Pool Repairs
- High strength epoxy
- Bonds to fresh or hardened concrete, stucco, wood, metal
- No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
-
Micro-seal HD Silane Siloxane Water Repellent | 100% Solids | Concrete Brick Block Stucco | Clear Non Film Forming
- Mold and mildew inhibitor
- Clear, long lasting formula designed to seal a variety of surfaces
- Acid and grease resistant
- Weathering, no change after 3,500 hours
- VOC compliant; Contains no known carcinogens
-
Micro-Seal SiH4 100% Silane Deep Penetrating Water Sealer | UV Resistant | Concrete | Stucco | EIFS | CMU Block | Clay Tile
- Small Particle Size for Deeper Penetration and longer lasting results
- Will not yellow, haze, crack or peel
- Overspray Does not etch metal or glass
- No film formation - does not change looks of the surface
- Allows substrates to breathe without trapping moisture
-
Micro-seal Silane Siloxane Water Repellent | Concrete Brick Block Stucco | Clear Non Film Forming | ASTM Tested Against 98 mph Wind Driven Raing
- Labor and material water repellent warranty available for 10 years, up to 20 years using concentrate formula
- Easy to use Concentrates available that saves money, time and easier on the environment!
- ASTM tested for superior performance in stopping water and salt damage
- 100% Eco-friendly: low VOC
- Stain resistant to oil, gas and anti-freeze
-
P3 Industrial | Waterproofs Concrete | Permanent Salt, Freeze Thaw, Abrasion Protection | Nano-Technology | Exterior & Interior
- Permanent Concrete Waterproof and Physical Protection With Only 1 Application Using Colloidal Silica Nano-Technology Reduced cost of maintenance and life cycle costs Indoors / Outdoors on Horizontal / Vertical Concrete Reduces Depth of Penetration of Water Under Pressure 97% EN 12390-8 Withstands Min 75lbs+ Hydrostatic Vapor Pressure Resistance to Concrete Freeze / Thaw damage increased 49% ASTM C666 Excellent Protection Against Salt Corrosion, Improved 48% ASTM C1556 Deep Penetration Min 1.5"+ For Exceptional Results Improved abrasion resistance 50% ASTM C1803 Cures New Concrete 14 days then Apply Coatings Significantly Improved Stain Resistance Apply to wet or damp concrete Easy Spray Application Zero VOC 15 Year Performance Warranty
-
P3 Marine | Saltwater, Fresh Water & Chloride Concrete Protection | Waterproofs | Permanent Salt, Freeze Thaw, Abrasion Improvement | Nano-Technology
- Exceptional Marine Saltwater and Winter Road Salt Concrete Waterproof Protection from moisture, chloride salt, other contaminant penetration
- Great for Marine and Inland Waterway concrete infrastructure, docks, ramps, bridges, roads, parking lots
- Easy Spray Apply Low Tide and Wet Concrete Surfaces Horizontal & Vertical
- Increased Concrete Durability and Life Span with 1x Permanent Application Using Colloidal Silica Nano-Technology
- Reduces Depth of Penetration of Water Under Pressure 90% EN 12390-8
-
P3 Protect Clear Concrete Sealer | Moisture, Salt, Freeze Thaw, Stain Protection | Fast Easy Application | Lifetime Performance
- Uses Colloidal Silica Nano Technology For Superior Performance With Lifetime Improvement in Durability & Protection
- Great for driveways, parking lots, sidewalks, patios and porches subject to harsh winter and salt conditions
- Outstanding Clear Protection with No Change in Surface Appearance
- Deep Penetration Below the Surface - never wears off
- Protect Concrete From Road Salts and Surface Contamination with 42% improvement ASTM C1556
-
Paint Sealer & Water Repellent Premium Grade
- Prevents growth of mold and mildew
- Prevents absorption of water
- Stain resistant
- Will not yellow
- Easy to use – Same day, two coat application