Shop
Filter By Category
Questions about our products?
Call or Text us for help picking the correct solution for your project. (630) 675-4509
Showing 1–50 of 76 results
-
4G Surface Guard: Walls & Floors | Advanced Protection | Easy Application | Fast Drying
- Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties.
- Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer.
- Fast Drying: Achieve quick results with a fast drying time.
- Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance.
- Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors.
-
7001 Polyurethane Primer Concrete & Steel | Quick Cure | Exceptional Adhesion | Low 35F Temp
- Concrete & Steel Primer For Epoxy, Urethane, Polyaspartic, Polyurea Coatings
- Cross-links With Polyurea, EPDM Roofing and other Plastic Materials Difficult to Bond to
- Deep Penetrating Exceptional 1200 psi Adhesion
- Superior Corrosion, Abrasion and Water Resistance
- For Use in Submerged Service Applications
-
AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concrete Masonry Wood Plastic | Non-Yellowing
- Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
- Great for use as direct to metal corrosion resistant primer over steel
- Primer for concrete, masonry, wood, plastic surfaces
- Scratch Resistant
- Non-yellowing & UV Resistant Topcoat
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
- Penetrating Primer Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
-
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Composite Resin: Works well with fiberglass and carbon fabrics to create field-applied composites
- Mortar Repair: Effective epoxy resin for making epoxy strengthened mortar. Excellent for industrial applications such as pump bases
- 100% Solids
- Formulated with no volatile solvents
-
Chalky Wall Sealer and Clear Acrylic Primer
- Flexible and breathable
- Helps prevent efflorescence
- Protects wood from swelling, shrinking, or grain raising
- Seals and binds chalked surfaces; improves adhesion of topcoat
- May be used on previously painted and properly prepared surfaces
-
Color-lok Semi-Transparent Acrylic Siloxane Stain Tint Base
- 5 year labor and material warranty
- Exclusive Micro-lok penetrating formulation
- Does not change the surface texture
- Rich uniform look, dries to a dead flat finish to minimize flashing & lap marks
- Superior moisture control performance
-
Color-lok Semi-Transparent Acylic Siloxane Stain
- 5 year labor and material warranty
- Exclusive Micro-lok penetrating formulation
- Does not change the look of the surface texture
- Rich uniform look dries to dead flat finish minimizes flashing, lap marks
- Superior moisture control performance
-
Color-lok Solid Color Acrylic Siloxane Stain Tint Base
- 5 year labor and material warranty
- Exclusive Micro-lok penetrating formulation
- Does not change the look of the surface texture
- Rich uniform look, dries to a dead flat finish to minimize flashing & lap marks
- Superior moisture control performance
-
Color-lok Solid Color Acylic Siloxane Stain
- 5 year labor and material warranty
- Exclusive Micro-lok penetrating formulation
- Does not change the look of the surface texture
- Rich uniform look dries to dead flat finish minimizes flashing, lap marks
- Superior moisture control performance
-
Cool Coat Clear Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools The Surface
- Clear protection - allows underlying surface color to be seen (it "can" be slightly hazy over dark accent colors only)
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Lower Cooling Costs in the Summer When Applied to Exterior Walls & Roofs
- Cool painted metal surfaces like metal handrails from the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
Cool Coat Tint Base Thermal Barrier Heat Reflective Insulating Paint (Custom Colors) | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Custom Color Locally Using One of Our 3 Tint Bases
- Create most colors with our Pastel, Deep and Accent Tint Base options
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
-
Cool Coat White Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools Surface
- Reflects Infrared Radiation Using Advanced Ceramic Sphere Technology
- Ready-to-Use White Color - Flat Finish
- Lower Cooling Costs in Summer When Applied to Exterior Walls & Roofs
- Use to cool metal surfaces like handrails in the hot summer sun
- Lower Heating Costs in Winter When Applied to Interior Walls
-
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | Apply Down to18°F | Quick Cure
- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Fast recoat 1-2 hours at 75°F & 50% R.H
- Cures down to 18°F dry and apply to 140°F
- High heat resistance up to 400°F dry
- Single component, easy to use
-
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | P
- No sagging on vertical walls up to 12 mils per coat
- Good chemical and abrasion resistance
- Works well on underwater concrete decorative surfaces including pools and water features
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
-
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colo
- No sagging on vertical walls up to 8 mils per coat (4 mils DFT)
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
-
E104 Primer Moisture Cured Urethane Zinc Rich Primer
- Excellent "wetting out" and adhesion to sound rusty steel
- Fast recoating within 4 hours at 75F
- Cures down to 25F on dry surfaces
- "Open" recoat window with proper cleaning
- Passed 1,500 hours in salt spray cabinet
-
E116 Rust Inhibitive Epoxy Primer
- Excellent rust preventing properties
- Excellent resistance to "under cutting"
- Good flexibility and abrasion resistance
- Long recoat up to 6 months
- Outstanding adhesion and "wetting out" ability
-
E145 Polyamide Epoxy Block Filler | Concrete Block & Masonry Vertical Walls | High Build to 11.5 Mils DFT One Coat
- Excellent Adhesion to Vertical Block and Masonry Surfaces
- Excellent filling properties provide ideal "hold out"
- High Build Apply to 11.5 mils DFT (dry film thickness) One Coat
- Basecoat for high performing coating systems
- Hard film with high impact
-
E15M Epoxy Mastic Steel Primer DTM & Concrete Coating | Chemical Resistant | Low Temp 25F
- High solids DTM (direct-to-metal) chemical resistant steel primer or finish coat to steel and concrete
- Self priming to steel including tight rust
- Apply Vertical Surfaces to 8 mils DFT Steel & Concrete
- Great primer for use with our E1500HN (horizontal) and E555VN (vertical) Novolac Chemical Resistant Epoxies
- USDA Approved
-
E2.8 Poly-Chemcure Primer | Fast Recoat | Low-Temp | OEM/Steel Fabricator
- High performance primer can be prepared on carbon steel, galvanized steel and aluminum
- Recoating in 90 minutes is possible for maximum productivity
- No induction time and longer pot life will improve productivity
- A smooth, sandable primer at 3 mils DFT over abrasive blasted or power tool cleaned substrate is needed for additional corrosion resistance
- Application by brush and roller, in addition to spraying, may be necessary
-
E275 High Build Polyamide Epoxy Mastic | Chemical Resistant | Excellent Adhesion to Steel
- Excellent adhesion to steel
- Meets USDA Requirements
- A high build primer or finish coat
- Excellent against "undercutting"
- Can be applied up to 12 mils DFT
-
E332 Polyester Polyurethane Coating| Clear | Topcoat | High Gloss | Chemical, Impact & Abrasion Resistant
- Excellent Chemical Resistance
- High Gloss
- Excellent Weather Resistance
- Highly Resistant to Abrasion and Impact
- Non-chalking and non-yellowing
-
E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Interior & Exterior | 21 Colors
- Great Interior & Exterior Vertical Concrete & Steel Protection
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
-
E374 Clear Satin Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls
- Great Interior & Exterior Vertical Concrete & Steel Protection and as topcoat for light to medium duty foot traffic only applications
- Exceptional Exterior Durability
- High solids
- Easy to clean
- Good chemical and stain resistance
-
E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure 25F | Extremely Flexible
- Self Priming on steel
- Excellent as a primary containment coating for internal tank linings (when part of specified system)
- Excellent as a secondary containment coating
- Performs well over epoxy mortars and properly primed concrete surfaces
- Can be applied on damp surfaces
-
E555VN Novolac Epoxy | Superior Steel & Concrete Chemical Vertical Protection | Tank Linings
- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 98% Sulfuric Acid, 37% HCL and 70% Sodium Hydroxide
- Vertical application to 10 mils DFT.
- Great for Secondary Containment for both steel and concrete surfaces
- Use as Primary Containment and Tank Linings when used as part of specified system
-
E615 Epoxy Crack Filler | 100% Solids | Vertical, Overhead & Horizontal | Concrete, Steel and Wood
- May be applied up to 1" thick when patching holes
- Excellent chemical, abrasion and impact resistance
- Easily applied with trowel, putty knife or spatula
- Applies up to 1/2 inch vertically
- Excellent for filling bug holes
-
E64 Rain Shield Elastomeric | Flexible 400% Elongation | 100% Acrylic | Ceramic Sphere Technology | Masonry Stucco Wood Metal Concrete | 800+ Colors
- Flexible Up to 400% elongation ASTM D412-87
- Resists Wind Driven Rain (Passes ASTM E96, TTC-555-B)
- Breathable, Thermal Barrier
- Excellent Adhesion
- Flexible: Performs very well in hot and cold environments
-
E6470 Textured Primer | 100% Acrylic Latex | High Build Elastomeric | Concrete Masonry Stucco Wood
- Primer and Texture in one
- Allows matching of surrounding textured surfaces for repairs
- Superior adhesion to virtually any surface
- Excellent surface adhesion
- Fast drying
-
E70 Stretch-Guard Elastomeric Coating | Flexible 200% Elongation | 100% Acrylic | Concrete Stucco Masonry Metal | 800+ Colors
- Up to 200% elongation
- Flexible: Performs very well in hot and cold environments
- Repels water & helps eliminate moisture penetration
- Self-Priming
- Ultra-violet stability
-
E7075 Smooth Primer | 100% Acrylic Latex | Stain Blocking | Concrete Stucco Wood Metal Plywood
- Superior adhesion to virtually any surface
- Blocks water soluble difficult stains such as tannins, rust and smoke damage
- Excellent surface adhesion
- Fast drying
- Breathable
-
E811FP Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
- Exceptionally tough, flexible 1 part acrylic roof coating
- Excellent adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
-
E814CP Co-Polymer Flat Roof Coating | 11 Color | Flexible | Waterproof
- Exceptionally tough, SEBS Based waterproof 1 part roof coating
- Excellent adhesion to EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal surfaces
- Great for both Flat & Sloped Roofs
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
-
E814R Co-Polymer Liquid Rubber Roof Walkway Coating | Slip Resistant
- Exceptionally tough, druable one part waterproof roof walkway
- Offers excellent anti-slip walking surface
- Excellent adhesion and works on most roof surfaces incl EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, and Metal.
- Available in 12 colors
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
-
E814RCP Heat Reflective Co-Polymer White Flat Roof Coating | Cools Roof Surface | Saves Energy | Flexible | Waterproof
- Exceptionally tough, heat reflective, 1 part waterproof coating
- Great for both Flat and Sloped roofs
- Heat Reflective Technology that Cools Roof Surface
- Excellent adhesion to EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal surfaces
- Reflective white color reduces energy costs with Solar Reflectance 82.5% and SRI 102 (solar reflective index)
-
E8840 Heat Reflective Roof Coating | 100% Acrylic Ceramic Elastomeric | Flat Build-Up Roofs | Metal | Concrete Tile | Polyurethane Foam | Modified Bitumen | Mobile Homes
- Reduce Interior Temperatures Up To 20%
- Up to 30% Energy Savings
- Waterproofing System
- Resists Ponding Water
- Extends Roof Life
-
E8875 Underseal Water Proofer | 100% Acrylic Elastomeric | 500% Elongation | Composition, Bitumen, APP, TPO, Hypalon, Concrete, Metal Roofs | Planter Boxes | Retaining Walls | Shower Pans
- Excellent Roof Coating, Planter Box & Shower Pan Waterproofing
- Up to 500% Elongation
- Primes and Seals
- UV Resistant
- Creates a Water Barrier
-
E903UCB Cove Base Urethane Mortar | HIgh Heat 250F | Anti-Fungal
- Easy construction of vertical cove bases
- Seamless hygienic finish with no grout lines
- Resistant fo fungi growth
- Low odor, fast installation, fast cure
- Thermal shock to 250F & chemical resistance
-
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
-
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 100% Solids
- Low Viscosity Epoxy
- Increases Adhesion of Coating System to Metal Surfaces
- Tough, Water Resistant Coating
- 100% Solids
-
EE-95 Novolac Epoxy Rebuild | 100% Solids | Restoration | Vertical
- Rebuild any pit repair
- Smoothing or leveling of vertical areas
- Solvent Free
- VOC Free Product
- Strong chemical resistance
-
EXPERT Clean & Bright Eco Cleaner | Step 1 (LIGHT)| Multi-Purpose Wood Cleaner & Stain Remover| Removes Organic Growth | Oxygenated Wood Bleach
- Mild alkaline wood cleaner for removing surface stains from unsealed, lightly soiled, or faded wood
- Removes Mold, mildew and algae
- Safe eco-friendly formula- no harsh chlorines or bleaches
- Ideal prep before stain or coating application
- Restores Wood's Natural Beauty
-
EXPERT Clean & Bright Wood Brightener | Step 2 | Neutralize Wood Surfaces After Cleaning | Surface Prep Prior to Wood Staining
- Restores Wood's Natural Color & Neutralize pH before staining
- Brings back the original color of the wood
- Neutralizes and brightens wood after any alkaline chemical wash
- Restores proper pH in wood and opens wood grain to accept more stain
- 100% Oxalic Acid
-
EXPERT Clean & Bright Wood Cleaner | Step 1 (MILD)| Lifts & Removes Stains | Removes & Kills Algae, Mold, Mildew Organic Growth | Mild Stripper
- Effective Alkaline wood cleaner for removing surface stains
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Removes stains caused by tannins
- Works well on both treated and untreated exterior wood.
- Easy to Use & Clean Up
-
EXPERT Clean & Bright Wood Stripper | Step 1 (HEAVY)| Oil & Water Base Stain Remover | Remove Extreme Organic Growth | Restore Natural Wood Beauty | No Bleach Formula
- Removes Oil Based Stains and Finishes
- Remove and cleans organic growth stains; Algae, Mold and Mildew
- Removes Lumber Ink Stamps, Dirt, Debris and Grime
- Easy to Use & Clean Up
- Restores Wood's Natural Beauty
-
EXPERT Clean & Bright Wood Stripper Booster | Step 1 (EXTRA HEAVY) | Boosts Effectiveness of Wood Strippers | “Butyl Boost” 100% Butyl Cellosolve
- Perfect Booster for Wood Strippers when removing water based stains like Behr, Olympic or Superdeck
- Step 1 or our 3 Step Process to Get your Project Ready for Expert Stain & Seal
-
EXPERT Clean Up Degreaser – Concentrated Pre-Treatment & Oil Stain Remover | Essential Staining Protection
- Maximum Concentration Power: Pure concentrate delivers 5x the cleaning power. One gallon makes 5 gallons of working solution
- Dual-Strength Options: Dilute 4 to 1 for standard cleaning, keep undiluted concentrate for tough stain spills on concrete
- Massive Value: No paying for pre-diluted water. One gallon concentrate equals 5 gallons of competitor
- Professional Efficiency: Mix exactly what you need for each project. No waste from large pre-mixed containers.
- Convenient Dispensing: Built in spout allows precise measuring and easy pouring without mess.
-
EXPERT Clear Wood Stain & Seal | Oil Based Deep Penetrating | Great For Hardwoods & IPE Wood|Extreme Climate Apply -10°F to 110°F | Mildew & UV Resistant | Low VOC
- Clear Protection
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color