Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
4000 Acrylic Static Dissipative Clear Floor Finish
From: $290.00- Acrylic Clear Static Dissipative Floor Finish
- Use on Vinyl, Linoleum, or Ceramic Tile
- Strip Cycle to 12 mos
- Abrasion Resistant, Water Base, Low VOC
- UL Listed Slip Resistant and ANSI S20.20-2007
- Great For Electronics, Medical, ESD Protected Areas
4600 Ultra Static Dissipative Clear Urethane Floor Finish
From: $330.00- Abrasion Resistant Urethane Enhanced Finish
- Use on Vinyl, Linoleum, or Ceramic Tile Floors
- Increase Strip Cycle to 24 Mos
- Meets ANSI S20.20-2007
- UL Listed Slip Resistant
- Great For Electronics, Medical, ESD Protected Areas
4800 Ultra II Static Dissipative Clear Urethane Floor Finish
From: $350.00- Abrasion Resistant Urethane Enhanced Finish
- For Concrete, Epoxy, ESD epoxy, Dissipative Tile
- Increase Strip Cycle to 24 Mos
- Meets ANSI S20.20-2007
- UL Listed Slip Resistant
- Great For Electronics, Medical, ESD Protected Areas
Hot
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids
From: $149.00- Beautiful Decorative High Gloss Appearance
- Cold Temperature Application to 30F using Fast Set
- Easy Squeegee/Roller Application
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Highly Adhesive, Flexible & Non-Brittle
- Optional Fast or Slow Set, High Heat & Humidty
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Use as Stand Alone System or Topcoat to Epoxy
Hot
6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids | Quick Cure
From: $115.00- Commercial, Industrial, Residential Concrete Floors
- Cold temperature down to 35°F
- Tough - Attractive Looking Epoxy
- Good Chemical, Abrasion, Impact Resistance
- Quick 4 to 7 hour set time
- Self Priming With No Primer Required
- 100% Solids, no VOC, 2 Component
- Clear or Selection of Colors
- Excellent Protection at Lower Cost
AcrylicPoly DTM² Acrylic Modified Polyurethane WaterProofer & Primer | Flexible | Metal Concret...
From: $120.00- Excellent breathable waterproofing topcoat that offers a flexible, chemical resistant, non-yellowing film over painted and unpainted surfaces
- Great for use as direct to metal corrosion resistant primer over steel
- Primer for concrete, masonry, wood, plastic surfaces
- Scratch Resistant
- Non-yellowing & UV Resistant Topcoat
- Anti-Carbonation Protection
- Excellent as a protective floor coating in a wide variety of concrete flooring applications
- Breathable elastomeric outdoor waterproofer
- Comes in a clear, ready to use white and 3 tint bases for custom coloring
- Available in 4 gloss levels from matte, satin, semi-gloss to glossy
Aspartic 100 High Build Polyaspartic for Concrete Floors | Low Temp 30°F | 100% Solids
From: $99.99- Tough, durable topcoat for interior epoxy floor coatings
- Very low to no odor great for sensitive odor indoor projects
- Can be used as high build topcoat up to 16 mils or 100 sq'/gallon
- Cold temperature application down to 30°F
- Excellent chemical and abrasion resistance
- UV Stable, Will Not Yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 100%
- Available clear & 14 colors (Pigment Sold Separate)
Aspartic 85 Polyaspartic Quick Cure Concrete Floor Coating | Low Temp 30°F
From: $79.50- Tough, durable topcoat for interior epoxy floor coatings
- Cold temperature application down to 30°F
- Fast Curing for quick 5-7 Hours Back in-Service Light Foot Traffic
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 14 colors (Colored Pigment Sold Separately)
Aspartic 85 Slow Set Polyaspartic Concrete Floor Coating | Low Temp 30°F | Low Odor Option
From: $99.99- Tough, durable topcoat for interior epoxy floor coatings
- Cold weather application down to 30°F
- Benefits of a Polyaspartic With Longer 45-60 minutes Working Times
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 14 colors (Colored Pigment Sold Separately)
- LOW ODOR version now available for indoor projects.
CLEAR-SEAL 100% Urethane High Gloss Super Premium Sealer
From: $176.00- High Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL High Gloss Acrylic Urethane Sealer
From: $79.00- High Gloss Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099123
Deep Ice Countertop and Casting Epoxy | River Tables | Bar Tops | To 4″ Deep | Bubble Free
From: $85.00- Easy Application
- No need to use torches or vacuum chambers
- Bubble Free
- See-through clarity
- Looks great with Metallic and Mica pigments and Dyes
- Can be poured up to 4” thick at one time
- Excellent UV & Chemical Resistance
- Superior Structural Strength: Withstands 2,000 lbs/sq.in pressure for up to (30 minutes of exposure)
DT-454 Epoxy Quick Cure UV Concrete Floor Coating Low Temp 40F | 100% Solids
From: $70.00- Tough, Durable Epoxy Coating
- Quick cure 6-7 hour recoat time
- Outstanding Bonding
- UV Resistant
- Good chemical, impact and abrasion resistance
- Cold temperature application down to 40F
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 14 colors! (Pigment sold separately)
E-Green Polyurea Basecoat for Concrete Floors | Low Temp 40°F | 100% Solids | 300% Elongation
From: $65.00- Tough, durable plant based Polyurea Coating
- Extreme Flexibility (300% Elongation)
- Exceptional Adhesion >500 psi ASTM D4541
- Cold temperature application down to 0°F
- Can be used as high build basecoat up to 16 mils or 100 sq'/gallon
- Excellent chemical and abrasion resistance
- Designed for high traffic and industrial areas
- 100% Solids Performance
- Available in clear & 14 colors!
- Quick Cure 1 Day System
- Little to NO ODOR
E344QC Polyaspartic Quick Cure Concrete Floor Coating | 85% Solids
From: $73.00- Tough, durable topcoat for interior epoxy floor coatings
- Fast Curing for quick back in-service
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- High solids 85%
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-Yellowing | Low Odor
From: $65.00- Tough, durable topcoat for epoxy floor coatings
- Indoor/Outdoor Applications
- Can Apply Direct to Concrete
- High solids 84%
- Easy to Work With 1:1 Mix Ratio
- Can be applied up 12 mils thick one coat (133 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E449 Polyaspartic Fast Cure High Gloss Concrete Floor Coating | 95% High Solids
From: $73.00- Tough, durable topcoat for epoxy floor coatings
- High solids 95%
- Quick back in service 3-5 hours light foot traffic
- Can be applied up 12 mils thick one coat (125 sq'/gallon)
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E450SF Polyaspartic Slow Cure High Gloss Concrete Floor Coating | 90% Solids (Formerly E449SF)
From: $80.00- Tough, durable topcoat for interior epoxy floor coatings
- High solids 90%
- Can be applied up 12 mils thick one coat (120 sq'/gallon)
- Long Working time 20-25 min
- Excellent chemical and abrasion resistance
- UV Stable and will not yellow
- Beautiful high gloss appearance
- Designed for high traffic and industrial areas
- Available in clear & 13 colors (Colored Pigment Sold Separately)
E572500 Non-Slip Skidproofer High Performance Epoxy Coating
From: $131.00- Great protection for problem slippery or wet concrete areas
- Outstanding slip resistance with a very aggressive textured anti-slip profile
- Excellent chemical and abrasion resistance
- Designed for high traffic and industrial areas
- Good For Docks, Ramps, Walkways etc
- 100% solids, 2 component
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
From: $45.00- Premium Grade Sealer and Water Repellent Offering a Nice Glossy Look
- For Concrete, Masonry, Brick, Wood
- Use on Painted or Unpainted Surfaces
- Adds Stain Resistance for Easier Cleanup
- Clear Finish Will Not Yellow
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Semi Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
HyperBOND Epoxy | Wet Condition Moisture Tolerant | Concrete Floor Coating | Low Temp 40F | 100% Sol...
From: $60.00- Tough, Durable Epoxy Coating
- Outstanding Bonding
- Water Insensitive and Can Be Applied In Wet Conditions
- Withstands up to 9 lbs. of hydrostatic pressure
- Cold temperature application down to 40F
- Long 30-35 min working time
- Resistant to Blushing/Sweating
- Good chemical, impact and abrasion resistance
- High solids 100%
- Available in clear & 13 colors! (Pigment sold separately). In 3 gallon kits only, available pre-colored in 3 colors
HyperFLEX Epoxy | Flexible Membrane Concrete Wood Steel | 150% Elongation | Low Temp 40°F | 100% Sol...
From: $74.00- Tough, Durable Epoxy Coating and Flexible Membrane
- Very Flexible with Elongation rating 150% @ASTM D-638
- Great for Quick Crack Repair and Control Joint Filler (when mixed with Fumed Silica)
- Can be used as a (1) basecoat for full broadcast floors, (2) flexible membrane, (3) repair gel to fill joints, cracks, & divots
- Cold temperature application down to 40°F
- Concrete & Wood Floors and Countertops
- Superior Flexibility and Outstanding Bonding
- Rapid Cure Rate For Same Day Flake and Solid Color System Application
- When used as membrane or basecoat HyperFLEX cures about 2 hours
- When used for gel repair cures about 10-15 minutes
- Good chemical and abrasion resistance
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 13 colors! (Pigment sold separately)
HyperREZ UV Epoxy Concrete Floor Coating | 45 min Work time | 100% Solids | Ultra Clear Great for Me...
From: $70.00- Tough, durable epoxy floor and countertop coating
- Cold temperature application down to 40F
- High Build Applications up to 32 mils/coat (50 sq'/gal)
- Long Working Time
- Good chemical and abrasion resistance
- UV Resistant
- High gloss appearance
- Designed for high traffic and industrial areas
- High solids 100%
- Withstands up to 9 lbs. of hydrostatic pressure
- Available in clear & 14 colors (Colored Pigment Sold Separately)
MuralGuard Clear Anti-Graffiti Coating | Protect Murals & Public Art to 15 Years | Non-Sacrific...
From: $44.00- Outstanding Protection of Painted Murals and other Public Art projects
- Warranted to sustain repeated graffiti removals to 15 years
- Easy to Clean Graffiti Removal with Level 10 Cleanability Level (ASTM D6578/D6578M-13) & Level 1 Cleanability (ASTM D7089-06)
- Over 160 graffiti cleaning cycles without damage to this tough, 2 part coating
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Comes in a Clear, Matte, Satin and Gloss finish
- Excellent Adhesion
- Great Chemical Resistance
Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | ...
From: $68.00- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin, Matte or Super Matte (nearly flat) Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- For Concrete, Brick, Wood, Metal, Tile (glazed & unglazed)
Satin-Lok Wet Look High Gloss Acrylic Sealer
From: $61.00- High Gloss Wet Look Acrylic Water Sealer
- UV Resistant Will Not Yellow
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
VandlGuard IsoFree Urethane Non-Sacrificial Anti-Graffiti Painted Wall & Mural | Low Temp 40°F ...
From: $81.00- "Best in Class" Graffiti Protection for the Toughest - Most Important Projects
- Warranted to sustain repeated graffiti removals up to 15 years and 165 graffiti removals
- Save 50% to 66% in labor application costs with 1 coat protection vs other 10 yr products
- Easy to Clean Graffiti Removal with low cost commercially available solvents
- 160+ graffiti cleaning cycles without damage
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin or Matte Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- Concrete, Brick, Wood, Metal, Plastic, Vinyl
VandlGuard Single Part Urethane Anti-Graffiti Wall & Mural Protect 10 Yr | Low Temp 40°F
From: $215.00- Premium Non-Sacrificial Anti-Graffiti Coating
- ASTM D7089-06/D6578 for Easy Level 9 Cleaning!
- Warranted to sustain repeated graffiti removals to 10 years with and up to 50 graffiti removals
- Matte Finish, Satin or High Gloss Option
- UV Resistant Will Not Yellow
- Good Chemical Protection
- Excellent Adhesion
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Concrete, Block, Brick, Wood, Painted Metal, Vinyl
VandlGuard Two Part Urethane Anti-Graffiti Wall & Mural Protect 10 Yr | Low Temp 40°F
From: $228.00- Super Premium Non-Sacrificial Anti-Graffiti Coating
- ASTM D7089-06/D6578 for Easy Level 9 Cleaning!
- Warranted to sustain repeated graffiti removals to 10 years and 60 graffiti removals!
- Quick cure graffiti removal only 24 hrs after applied
- Matte Finish, Satin or High Gloss Option
- UV Resistant Will Not Yellow
- Excellent Chemical Protection
- Excellent Adhesion
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Concrete, Block, Brick, Wood, Painted Metal, Vinyl
Wet Look High Gloss Acrylic Sealer For Wood & Masonry
From: $47.00- High Gloss "Wet Look" Acrylic Sealer
- Beautiful Appearance
- Interior and Exterior Surfaces
- For Concrete, Masonry, Brick, Stone, Wood
- Breathable Coating
- UV Resistant Will Not Yellow and Eco-Friendly
Copyright 2024 by Exterior Performance Coatings LLC