Return to previous page

Wet Wood Tung Linseed Oil UV Stain is Super Premium | Same Day Wash and Apply

Wet Wood Tung Linseed Oil Stain is an environmentally friendly low voc, UV, Water and Mold resistant semi-transparent stain.  It’s designed for use on decks, fences, log homes, and siding.  It’s the first stain to use Nano-technology in the Ultra Violet protection package. Colors (7 available) are made with trans-oxide nano technology pigments highly resistant to fade.

Wet Wood stain has one of the highest pigment contents for a semi-transparent stain, so colors remain rich and last longer with excellent UV protection and less color fade in strong sunlight.  This technology gives the clear color exceptional UV resistance to protect the underlying beauty of natural wood and prevent graying.

Wet Wood Stain has features homeowners & contractors appreciate. It uses technology to incorporate oils into a water base. This enables it to be applied to damp & wet wood, displacing water and penetrating the surface, curing to a long lasting finish.  It’s made of a unique blend of Tung Oil, a very tough resin used in high dollar furniture stains and linseed oil noted for its flexibility. This blend makes it very durable that expands & contracts with weather changes offering soap & water cleanup while tools are wet.

Highly resistant to surface growth of mold and mildew using Bio-Pruf® technology from Dow Chemical that provides long lasting antimicrobial protection to different products including paints. Tested by 3rd party labs for resistance to 30+ common occuring strains of bacteria and mold, it passed with the highest rating attainable.

Wet Wood Stain is now available in full pallet quantities of one color for shipment LTL truck freight.  A pallet contains (36) 5 gallon pails or 180 gallons of one color.  The full pallet quantity can be used on a single project or can be used for resale.  Lead time is typically 2 weeks order processing before shipping.

Where is Wet Wood Stain used?

  • Wood decks, log cabins, exterior walls, fences, outdoor furniture

Why Wet Wood Tung Linseed Oil Stain?

  • Save time & Labor with same day Cleaning & Application – Apply to wet surface right after power wash
  • Apply high Temp >90F by first wetting/cooling surface, remove excess water then immediately apply
  • Nano technology trans-oxide pigments for superior UV & color fade protection
  • Deep penetrating linseed | tung oil stain for superior performance
  • Works well on hardwoods including Ipe and Tiger
  • No surface film means no chipping, cracking, flaking
  • Superior mold | mildew protection using Bio-Pruf technology from Dow Chemcial
  • Excellent water resistance extends life of wood
  • Easy application with no lap marks
  • Overspray will not harm plants
  • Soap|water cleanup while still wet
  • Coverage 150-275 sq’/gallon rough surfaces & 275-375 sq’/gallon smooth surfaces
  • Special 180 Gallon Pallet Program Pricing For Large Projects and Resale

TECHNICAL INFORMATION

Color Choice of 7 colors and 1 clear
Sheen/Gloss Level Flat sheen
Dry times To touch 15 min, tack free 30 min, 1-2 hours to re-coat.  Ideally wait overnight to back in-service walking
#Coats Recommended Normally 1 coat.  2nd coat if desired should be applied same day before curing.  If 2nd coat doesn’t penetrate into 1st coat, just go over it with 100 grit sandpaper
Back in-service time Overnight next day
Application method Low pressure hand pump or airless sprayer, roller, brush
Where Can it be Used Exterior unpainted wood surfaces, vertical or horizontal
 High Application Temperature Apply over 90F by first cooling surface with water, remove standing water immediately then apply stain
Low Application Temperature 40F|10C Surface & Air
 Base  Water
VOC Content <25 g/L
Use on Material Wood, hardwoods including Ipe and Tiger

 


Coverage Rate Square Feet/Gallon
Rough Surfaces 150 – 275
Smooth Surfaces 275 – 375

Clear Stain SDS

Reviews