Name: Static Mixer Used With 21 oz Dual Cartridge Concrete Repair &amp; Joint Filler Kits
SKU: 9422
Availability: OutOfStock

Return to previous page

static mixer for 21 oz dual cartrige kits

Product Information

$25.00

Replacement Mixers for ASTC Polymers’ 21 oz cartridge kits
Allows multiple applications from single cartridge kit
Mixes product in correct ratio and ready to apply
Select static mixer for your specific cartridge kit
For use with dual cartridge kits 800, 830, 3003, 3004, 3246, 4034

STATIC MIXERS SOLD IN BOX OF 5 UNITS

Size

Clear

SKU: N/A

Categories: Adhesive & Sealants, Adhesives & Sealants, Cartridge Guns, Crack Repair, Crack Repair, Joint Fillers, Joint Fillers

Tags: polyurea sealant, vertical wall concrete repair, waterproof sealant

Description

Product Description

Static Mixer Replacements For Use with 21 oz Dual Cartridge Kits

Static mixer replacments designed for use with ASTC Polymers’ 21 oz dual cartridge polyurea joint filler and concrete crack repair kits. Each cartridge kit is sold with (1) static mixer per 21 oz kit. These are additional static mixers for use when you you don’t anticipate using an entire cartridge in one application. Replacement static mixers allow multiple applications of product from an individual dual cartridge kit. Static mixers allow for proper mixing of product such that material coming out the end of the mixer is ready to be applied. Tip can be cut to various lengths to adjust for width of flow coming out the end

Reviews

ProGrout (formerly 4034) Polyurea Concrete Quick Repair | Ultra Low Viscosity | Apply Low Temp -20°F...

From: $180.00

Back-in-service as fast as 30 min with heavy forklift loads
Meets OSHA fork lift operator floor facility safety, surface conditions
Save Bearings & Wheels On Electric Pallet Jacks and Electric Lifts.
Meets USDA requirements
Cold applications down to -20°F (-26°C)
Nano-locks, penetrates deep into small concrete cracks with very low viscosity
Fuel resistant
Increase productivity by providing smooth operating surface any temp
Reduces facility “down-time” & maintenance man hours
Mix with sand for additional strength for larger crack and holes repairs
High tensile strength & durability (as strong or stronger than surrounding concrete)
Very low voc <5 g/L and Low odor

Weight	N/A
Dimensions	N/A
Surface Applied To	Concrete
Size	2 Gallons, 10 Gallons
Set Time	Slow Set (3-5 Min Working Time), Fast Set (2-3 Min Working Tim)

SX20550 One Man Polymer Pump for Polyurea and Epoxy Joint Filler

SX20550 US SAWS Dual Component 1 Man Polyurea / Epoxy Joint Filler Pump

From: $6,950.00

Reduce Labor Cost - redesigned low profile 1 man use
Significantly Increased application Speed
Reduce Material Waste With Better Control of Flow
Allows Quick Joint Filling vs Cartridge Application
Works With Polyurea and Epoxy 2 Part Joint Fillers
Easy to Use – Inexpensive to Maintain
Twin 6.5 Gal Tanks Each Hold 5 Gal Joint Filler
Semi-Transparent Tanks To Monitor Liquid Level
Easy To Clean Polyethylene Tanks
Dispense 1:1 Ratio or 2:1 Ratio Product
1/2HP 110V Electric Motor, 0-6 GPM Flow Control
220V optional 1/2 HP Electric Motor Available Special Order Lead Time for use outside North America
Cordless Use With Optional Deep Cycle Battery & Power Invertor

PRICE INCLUDES LTL SHIPPING TO COMMERCIAL ADDRESS

Weight	N/A
Dimensions	N/A
Style	One Man Pump
Motor Voltage	110V Motor, 220V Motor

E105M Epoxy Mortar Concrete Patch Resurfacer Kit

E105M Epoxy Mortar Concrete Resurfacer & Patch Kit

From: $66.00

Economical Easy resurfacing old and damaged concrete floors
Compressive Strength 8,400 psi ASTM D695
Heat Deflection Temp 131.7F ASTM D648
High Build Resurfacing 1/8" to 1/4"
Patching up to 2" thick
100% solids epoxy
Comes complete with epoxy & aggregate
Selection of 5 color options
Application temp range 55°F to 90°F

Weight	N/A
Dimensions	N/A

7″ Concrete Pro Hand Grinder Kit | Metabo W24-230 | Dust Shroud | (2) 12 Segment Wheels | Loop...

$640.00

Hand-held units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
Use on concrete for cleaning, leveling high spots or uneven floor surfaces, removing glues, mastic, epoxies and other coatings
May be connected to a variety of dust collection systems for dust containment
The unit’s polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
Kit include electric grinder, dust shroud (full or convertible), (2) diamond cup grinding wheels and hardware for mounting threaded diamond cup wheels, ZEC wheels, or polishing pads

Weight	N/A
Style	7" Pro Grinder Kit W24-230