Return to previous page
  • Overview
  • Specs
  • Application
  • Videos

PerfectLeveler Repair | Concrete, Wood, Tile, Vinyl, VCT, Asbestos, Mastic | Fills, Levels, Smooths | Dries Quickly

PerfectLeveler is an easy to use and effective patching and leveling cement for use on most any surface and is ideal for repairing cracks, patching concrete, smoothing rough areas, leveling grout lines, and more. Works in a variety of thicknesses.

After your repair is complete, can coat over PerfectLeveler with most any acrylic, urethane, epoxy, polyaspartic, polyurethane coating or any glue, mastic or adhesive

PerfectLeveler is designed for use to make repairs and level the surface after application of PerfectPrimer.

Shipped as a powder in a 20lb container.

 

Where is PerfectLeveler Used?

  • Concrete
  • Mastic
  • Asbestos glue
  • Asbestos tile
  • Epoxy
  • Wood
  • Metal
  • VCT
  • Sheet Vinyl
  • Ceramic Tile
  • Floor Paint
  • Virtually any surface

Why PerfectLeveler?

  • Quick, Easy to Use
  • Easy application with trowel or putty knife
  • Stronger than other patching cements
  • Superior adhesion to most any surface
  • Dries quickly
  • No waste, comes as Powdered Mix allowing you to use only what you need
  • Works great for leveling/repairs after applying PerfectPrimer
SPECIFICATIONS
Package Size 20lbs
VOC 0g/L
Colors light gray
Product Form Powder

APPLICATION INSTRUCTIONS

SURFACE PREPARATION:

Make sure surface is clean, dry and all loose material has been removed.

HOW TO USE:

  1. If applying over PerfectPrimer, apply two coats of PerfectPrimer and allow to dry before applying PerfectLeveler.
  2. Pour PerfectLeveler powder into a small pail.
  3. Gradually add water and mix with trowel until material slightly hangs on trowel, or to desire consistency.
  4. Apply evenly using a trowel or spackle blade.
  5. When almost dry, finish with a brush, trowel, or damp sponge.

 

RESTRICTIONS:  Always use safety glasses and chemical resistant gloves when handling materials.

LIMITATIONS

  • Substrate temperature must be 5°F above dew point.
  • All new concrete must be cured for at least 30 days.
  • Physical properties are typical values and not specifications.

NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.

Reviews