Call Or Text
(630) 675-4509

Sign Up / Login
0 $0.00

Call Or Text
(630) 675-4509

Mi-T-M 3000 PSI gas pressure washer

Mi-T-M Hot Water Pressure Washer

Starting at $5,070.00

  • Pump: Preset stainless-steel and brass unloader valve. Forged brass manifold. Thermal relief valve. Low pressure detergent injector.
  • Components: Top-fired powder coated heat exchanger. No 1 or No2 diesel or kerosene fired burner (Not approved for bio-fuel)
  • Miscellaneous: Temperatures rise 150F above ambient, maximum outlet temperature is 200F
  • Quick connect nozzles - 0°, 15°, 25° and 40°
  • 2 x 50-foot x 3/8-inch steel wire-braided high pressure hose with quick connects
Calculate Square Footage

Overview

  • Description
  • Additional Information
  • Specs
  • Videos
  • FAQ
  • More Options

Mi-T-M Hot Water Pressure Washer

The Mi-T-M HSP series is the ideal all-in-one industrial hot water pressure washer for professional graffiti removal contractors or city. Choose from three models- each equipped with 2 x 50ft 3/8″ hot water pressure hose. The Patented Electro Magnetic Firing (EMF) system eliminates the need for a 12V battery to operate the burner.

This pressure washer is heavy-duty and ready for outdoor application.

All machines supplied through us come standard with two free 50ft high pressure hoses with brass quick connects as well as the optional hour meter & adjustable temperature control which normally cost extra.

Choose from the 2 model options below:

  • Mi-T-M 3500 PSI with Electric Start, Hour meter & Adjustable Temp Control, Two 3/8inch x 50ft Hoses (HSP-3504-3MGM)
  • Mi-T-M 3500 PSI with Manual Start, Hour meter & Adjustable Temp Control, Two 3/8inch x 50ft Hoses (HSP-3504-3MGM)
  • Mi-T-M 3000 PSI with Manual Start, Hour meter & Adjustable Temp Control, Two 3/8inch x 50ft Hoses (HSP-3003-3MGM)

WHERE IS Mi-T-M HOT WATER PRESSURE USED?

  • Graffiti Removal Projects
  • Walls
  • Driveways
  • Commercial Buildings
  • Walkways
  • Transit Stations
  • Concrete & Asphalt Areas
  • Sidewalks

WHY MI-T-M HOT WATER PRESSURE?

  • Pump: Preset stainless-steel and brass unloader valve. Forged brass manifold. Thermal relief valve. Low pressure detergent injector.
  • Components: Top-fired powder coated heat exchanger. No 1 or No2 diesel or kerosene fired burner (Not approved for bio-fuel)
  • Miscellaneous: Temperatures rise 150F above ambient, maximum outlet temperature is 200F
  • Quick connect nozzles – 0°, 15°, 25° and 40°
  • 2 x 50-foot x 3/8-inch steel wire-braided high pressure hose with quick connects
  • Adjustable pressure insulated dual lance
  • Professional-grade insulated trigger gun with safety lock-off
  • Hour Meter: Display the number of hours unit has been in operation
  • Adjustable Thermostat: Operator is able to adjust outlet water temperature between 98°-248°F
Weight N/A
Dimensions N/A

Mi-T-M 3500 PSI with Hour Meter & Electric Start (HSP-3504-3MGM)

  • PSI:  3500
  • GPM: 3.3
  • Displacement/Engine: 420cc Mi-T-M OHV
  • Pump: AR
  • Engine Fuel Capacity: 1.72 gallon
  • Burner Fuel Tank Capacity: 5.5 Gallon
  • Burner Fuel Cons.: 2.14 gph
  • BTU Per Hour: 294,000
  • Net Weight: 428 lbs.
  • Length: 43 in.
  • Width: 30 in.
  • Height: 41 in.

Mi-T-M 3000 PSI with Hour Meter (HSP-3003-3MGM)

  • PSI:  3000
  • GPM: 2.9
  • Displacement/Engine: 300cc Mi-T-M OHV
  • Pump: AR
  • Engine Fuel Capacity: 1.43 gallon
  • Burner Fuel Cons.: 1.84 gph
  • BTU Per Hour: 253,000
  • Net Weight: 407 lbs.
  • Length: 43 in.
  • Width: 30 in.
  • Height: 41 in.

Cannot find your answer?

Call or text (630) 675-4509 or email [email protected].

What is a hot water pressure washer and why is it better for graffiti removal?

The Mi-T-M hot water pressure washer is designed for professional cleaning, surface preparation, and restoration applications. It is commonly used to remove tough contaminants such as:

  • Graffiti
  • Oil and grease
  • Dirt and buildup on concrete and masonry

It’s a strong companion tool for contractors working with surface prep and coating systems.

Why should I use hot water with graffiti removers like Transgel or Bare Brick?

Yes. This pressure washer can be used as part of a complete graffiti removal system when paired with products like:

  • Transgel Graffiti Remover
  • Heritage Remover
  • Bare Brick Graffiti Remover

After applying the remover and allowing proper dwell time, the pressure washer is used to rinse and remove the lifted coating from the surface.

To see full selection of Graffiti Removers check out our Industrial Graffiti Removers Page.

Why use a hot water pressure washer instead of cold water?

Hot water pressure washers are commonly used in professional cleaning because heated water helps:

  • Break down contaminants more effectively
  • Improve overall cleaning efficiency
  • Assist in removing stubborn residues

This makes them especially useful for demanding cleaning applications like graffiti removal and surface restoration.

Do I apply the graffiti remover before or after pressure washing?

The correct process is:

  1. Apply graffiti remover (Transgel, Heritage Remover, etc.)
  2. Allow proper dwell time (per product instructions) & Scrape Off
  3. Rinse with hot water pressure washer
  4. Repeat if necessary for deep penetration

Hot water is critical in the rinsing step to fully lift and remove the coating. For additional application tips reach out to us at 630-675-4509 or [email protected].

Will hot water damage the surface?

When used correctly, hot water pressure washing is safe for most surfaces.

However:

  • Always match pressure to the surface (lower PSI for softer materials)
  • Keep proper distance from the surface
  • Test a small area first

Hot water actually reduces the need for extreme pressure, which can help prevent surface damage.

What surfaces can this pressure washer be used on?

The Mi-T-M hot water pressure washer is suitable for a wide range of surfaces, including:

  • Concrete
  • Brick
  • Masonry
  • Stone

It is commonly used on exterior surfaces where deep cleaning or preparation is required.

Is this pressure washer suitable for surface preparation before coatings?

Yes. Proper surface preparation is critical before applying coatings. A hot water pressure washer can help:

  • Clean the surface thoroughly
  • Remove contaminants that may interfere with adhesion

This makes it a useful step prior to applying epoxy, polyaspartic, or other coating systems.

Can this be used for general cleaning outside of graffiti removal?

Yes. In addition to graffiti removal, it can be used for:

  • General exterior cleaning
  • Equipment and surface maintenance
  • Preparing surfaces for further treatment or coating

What makes Mi-T-M pressure washers a good option?

Mi-T-M equipment is widely used in commercial and industrial applications and is known for:

  • Durable construction
  • Professional-grade performance
  • Options suited for different jobsite needs

Does this replace the need for a graffiti remover?

No. A pressure washer is a supporting tool, not a replacement for chemical removers.

For best results, it should be used alongside the appropriate graffiti remover, which is designed to break down the coating before rinsing.

💡 Pro Tip

Pair this pressure washer with:

This combo creates a complete graffiti removal system, not just a single product. To see full selection of Graffiti Removers check out our Industrial Graffiti Removers Page. Reach out to us at 630-675-4509 or [email protected] for help ensuring correct product selection for YOUR project.

Recommended Tools

You may also like…