EXPERT Clean & Bright Wood Stripper Booster | Boost Effectiveness When Removing Water Based Stains | “Butyl Boost” 100% Butyl Cellosolve

COVERAGE RATE

Add Butyl Boost to your already made wood stripper.  Use up to 10% Butyl Boost in your stripper or 1/2 gallon Butyl Booster per five gallon stripper mix.

APPLICATION INSTRUCTIONS FOLLOW THESE SIMPLE APPLICATION STEPS

MIXING INSTRUCTIONS:

• Add Butyl Boost to your already made wood stripper.  Use up to 10% Butyl Boost in your stripper or 1/2 gallon Butyl Booster per five gallon stripper mix.

ADDITIONAL INSTRUCTIONS:

• Strippers must be kept wet or they will not work, a light mist every few minutes will do.
• Test on a small, inconspicuous area of the wood to ensure proper wood care.
• Always wet plants, shrubs, and other surrounding vegetation before and after use.
• Always brighten the wood after using a wood stripper using Stain & Seal Wood Brightener

WARNING:

Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets.  

• Keep out of reach of children.
• Exposure to Butyl Cellosolve could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention.
• Do not ingest.
• Always wear personal protective equipment when using this product.
• DO NOT MIX WITH OTHER CHEMICALS.

PRECAUTIONS:

Keep out of reach of children. Do not ingest. Avoid contact with face, eyes, mouth, nose, and skin.  Avoid breathing mist. Close container tightly after every use. Do not re-use containers. Danger: Causes eye, skin, and mucous membrane burns. Harmful if swallowed. Harmful if absorbed through skin. Vapor harmful. Wear chemical resistant gloves, boots, goggles, and protective clothing. Wear a NIOSH/MSHA approved respirator and face shield while applying or removing, especially if vapors or mist is generated. Change clothing and wash thoroughly when finished. Avoid contact with bare metal surfaces. Project surfaces are extremely slippery to walk on. DO NOT store in aluminum containers.

COMBUSTIBLE: Keep away from heat, sparks open flames, or hot surfaces. DO NOT drink, or smoke when using this product.

FIRST AID:

IF INHALED: Move to an area with fresh air. In case of breathing difficulties administer oxygen and seek medical attention immediately.

IF SWALLOWED: Rinse mouth with water, if person is conscious. DO NOT induce vomiting unless directed by medical personnel. Call Poison Control Center or doctor.

IF ON SKIN: Rinse using water. Remove contaminated clothing. Wash skin thoroughly with mild soap and water. If skin irritation persists, seek medical attention.

IF IN EYES: Flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention immediately. For additional information on this product, consult the EXPERT Clean & Bright product data sheet, or safety data sheet.

NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommended herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.

What does EXPERT Clean & Bright Wood Stripper Booster do?

EXPERT Clean & Bright Wood Stripper Booster is a concentrated additive designed to increase the effectiveness of wood strippers when removing stubborn coatings. It is especially useful for removing difficult water-based deck stains, acrylic coatings, and latex finishes that standard strippers may struggle to remove.

When should I use a wood stripper booster?

A wood stripper booster should be used when a standard wood stripper is not strong enough to remove existing coatings. It is commonly used when dealing with:

• Water-based deck stains

• Acrylic or latex coatings

• Multiple layers of stain

• Extremely weathered finishes

Adding a booster helps the stripper penetrate and break down these coatings more effectively.

What types of stains can this booster help remove?

Wood Stripper Booster is particularly effective for removing water-based deck stains and coatings that resist normal stripping products.

Examples include coatings commonly found on decks such as:

• Acrylic deck stains

• Latex coatings

• Water-based penetrating stains

• Certain solid color deck stains

These finishes can be more difficult to remove than traditional oil-based stains.

What is Wood Stripper Booster made from?

EXPERT Clean & Bright Wood Stripper Booster contains 100% Butyl Cellosolve, a professional-grade solvent designed to improve penetration and help break down tough water-based coatings.

How do you mix Wood Stripper Booster with wood stripper?

Wood Stripper Booster is added directly to a prepared wood stripper solution.

Typical mixing ratios include:

• Up to 10% booster added to wood stripper

• ½ gallon booster per 5 gallons of stripper mix

This increases the stripping strength when dealing with stubborn coatings.

Can Wood Stripper Booster be used by itself?

No. Wood Stripper Booster is designed to be used only as an additive with a wood stripper. It enhances the performance of the stripper but is not intended to be used as a standalone cleaner or coating remover.

What surfaces can Wood Stripper Booster be used on?

When mixed with a wood stripper, this product can be used on most exterior wood surfaces including:

• Decks

• Fences

• Wood siding

• Pergolas

• Log homes

• Wood shakes

It is commonly used during wood restoration projects prior to staining or sealing.

Do I need to brighten the wood after stripping?

Yes. After using a wood stripper and booster, the wood should be neutralized with a wood brightener. Brightening restores the wood’s natural pH and color and prepares the surface for proper stain penetration.

How long should wood dry before staining?

After stripping and brightening, wood surfaces should typically dry 48–72 hours before applying stain or sealer. For best results, wood moisture content should generally be below about 13% before staining.

What is the EXPERT 3-Step Wood Restoration System?

For best results, wood restoration should follow the EXPERT system:

1. Clean / Strip – Remove dirt, stains, coatings, and organic growth

2. Neutralize & Brighten – Restore wood color and pH balance

3. Stain & Seal – Protect the wood with a penetrating stain

Following these steps improves stain absorption and long-term performance.

What is the difference between the Step 1 wood cleaning products in the EXPERT Wood Restoration System?

The EXPERT Step 1 Clean process offers four different wood cleaning products designed to remove dirt, grime, organic growth, and old stains from exterior wood surfaces. The main difference between them is cleaning strength and the type of buildup they are designed to remove.

Eco Cleaner – Light Cleaning
Eco Cleaner is designed for routine maintenance cleaning. It removes light dirt, mild organic growth, and surface grime from wood decks, fences, and siding that are still in good condition.

Wood Cleaner – Mild Cleaning
Wood Cleaner is ideal for moderately dirty wood. It removes dirt, mildew, algae, and light staining from weathered wood surfaces that need more than a simple maintenance wash.

Wood Stripper – Heavy Cleaning
Wood Stripper is formulated to remove old wood stains, weathered coatings, gray wood fibers, and heavy organic buildup. It is typically used when preparing decks, fences, or siding for refinishing with a new stain or sealer.

Wood Stripper Booster – Extra Heavy Cleaning
Wood Stripper Booster is an additive that increases the strength of the wood stripper. It is used when dealing with very stubborn coatings, multiple layers of stain, or difficult water-based finishes that require additional stripping power.

Using the correct Step 1 cleaner ensures the wood is properly prepared before brightening and staining.

Do I need to remove old stain before applying a new deck stain?

In most cases, yes. Old stains or coatings can prevent new stain from penetrating the wood properly. Stripping the wood ensures the new stain absorbs evenly and provides longer-lasting protection.