Product Use Instructions
Application: Spray Porous Surface Graffiti Remover on the surface to be cleaned and allow to sit for a few minutes. Use either a stiff, natural bristled brush or a metal brush to agitate. Wait until paint starts to buckle or lift before power washing. Heavier coatings may require reapplication of product before power washing. Repeat entire process if necessary.
Clean Up: Use E700DG Emerge Degreaser or soap and water with a paper towel, cloth, scrub brush or mop to clean remaining residue.
Precautions: Concrete surfaces may darken with use of Porous Surface Graffiti Remover. Protect plants and vegetation with a plastic drop cloth. Always use care to prevent overspray from getting on surfaces other than the one being prepped or cleaned. Avoid contact with eyes. In case of contact with eyes, flush thoroughly with water. Avoid prolonged contact with skin. Wear safety glasses to prevent product overspray from resulting in possible eye irritation, chemical-resistant gloves to protect from skin irritation and dryness, and work-appropriate shoes. In poorly ventilated or non-ventilated areas, use of a NIOSH certified (or equivalent) organic respirator is recommended.
Safe for Use on: Concrete, Brick, Stone, Landscaping Block, Bare Brick.
Do Not Use On: PVC, Drywall, Limestone, Terrazzo Tile, Plexiglass or other clear acrylic sheets.
Caution: Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation or may cause drowsiness and dizziness. May be harmful if swallowed. May cause reproductive harm. Keep out of reach of children.
Warning: This product can expose you to the chemical n-methyl-2 pyrrolidone which is known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY:
We warrant that our products are manufactured to strict quality assurance specifications and that the information supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the suitability of our product for your particular purpose. Any use or application other than recommenced herein is the sole responsibility of the user. Listed physical properties are typical and should not be construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE. NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.
