Call us (630) 675-4509
Show
Filter by
Filter by
10R ESD Anti-Static Primer Concrete Moisture Sealer
From: $225.00- Clear Primer / Sealer Protects Against Moisture Damage Prior to Applying ESD Floor Coatings
- Vertical and Horizontal Applications
- Penetrating Formula
- 100% Vapor Permeable
- Water Based
- Use With 4700SS ESD Anti-Static Floor Paint
4000 Acrylic Static Dissipative Clear Floor Finish
From: $290.00- Acrylic Clear Static Dissipative Floor Finish
- Use on Vinyl, Linoleum, or Ceramic Tile
- Strip Cycle to 12 mos
- Abrasion Resistant, Water Base, Low VOC
- UL Listed Slip Resistant and ANSI S20.20-2007
- Great For Electronics, Medical, ESD Protected Areas
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | De...
From: $200.00- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
- Covers approximately 5000 square feet per diluted gallon
6210 ESD Polycoat Anti-Static Floor Paint | Dissipative | Clear | ANSI/ESD S20.20-2014
From: $140.00- Suitable for dissipative packaging outlined in ANSI/ESD S20.20
- Resistance: 10e6-10e9 ohms/sq when tested to ANSI/ESD STM11.11 88
- Dissipative Coating
- Water-based polyurethane with zero VOC
- Reduces tribocharging
- Coverage: 200-250 square feet per gallon
- High durability
- Translucent with a suspension of opaque blueish-grey conductive particles
- For plastics, concrete, unfinished wood, or tile (multi-surface compatible)
- Made in the USA
6700 Premium ESD Static Dissipative Anti-Static Floor Paint | 9 Colors | ANSI/ESD S20.20-2014
From: $384.00- Static dissipative 10e7 - 10e9 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
- Use on Concrete, Wood, Metal surfaces
- Interior or exterior use
- Non-hazardous, Non-Flammable, low VOC
- Low gloss sheen
- 9 In-Stock Colors, Custom Colors Available
6700C Premium ESD Static Conductive Anti-Static Floor Paint | 3 Colors | ANSI/ESD S20.20-2014
From: $425.00- Static Conductive 10e3 - 10e6 ohms
- Conforms to ANSI/ESD S20.20-2014 when tested according to ANSI/ESD STM7.1
- No hot spots
- Excellent adhesion and color retention
- Good resistance to abrasion, oils and washing
- Use on Concrete, Wood, Metal surfaces
- Interior or exterior use
- Non-hazardous, Non-Flammable, low VOC
- Low gloss sheen
- 3 Colors Available - Light Gray, Dark Gray, Black
Chalky Wall Sealer and Clear Acrylic Primer
From: $23.00- Prevent Efflorescence, Seal Chalked Surfaces, Improve Adhesion of Topcoat
- For Concrete, Masonry, Wood
- Unpainted and Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- 3 Year Warranty
- Professional Grade
CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss
From: $176.00- High Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL 100% Urethane Super Premium Sealer| Low Gloss
From: $176.00- Low Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
Cool Coat Clear Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools The Surf...
From: $83.00- Clear protection - allows underlying surface color to be seen (it "can" be slightly hazy over dark accent colors only)
- Ready-to-Use White and Custom Colored Tint Bases available
- Saves Energy by Reflecting Infrared Radiation With Advanced Ceramic Sphere Technology
- Lower Summer Cooling When Applied to Walls & Roofs
- Cool painted metal surfaces like handrails in hot sun
- Reduce Winter Heating When Applied to Inside Walls
- Thermal Heat Reduction & Waterproofing Coating
- Solar Reflective Index (SRI) of 81.2% & Thermal Emittance 87.4% Reflects Sunlight & Releases Heat on Walls and Roofs
Cool Coat Tint Base Thermal Barrier Heat Reflective Insulating Paint (Custom Colors) | Elastomeric |...
From: $83.00- Saves Energy by Reflecting Infrared Radiation With Advanced Ceramic Sphere Technology
- Custom Color Locally Using One of 3 Tint Bases
- Create Most Colors with Pastel, Deep, Accent Tint Base Options
- Lower Summer Cooling When Applied to Walls & Roofs
- Cool metal surfaces like handrails in the hot sun
- Reduce Winter Heating When Applied to Inside Walls
- Thermal Heat Reduction & Waterproofing Coating
- Solar Reflective Index (SRI) of 81.2% & Thermal Emittance 87.4% Reflects Sunlight & Releases Heat on Walls and Roofs
- Flexible Elastomeric 200% Elongation Resists Cracking
- Tested to Stop a 98 mph Wind Driven Rain
- 5 Year Warranty Available
- Specified by Architects in 09900
Cool Coat White Thermal Barrier Heat Reflective Insulating Wall Paint | Elastomeric | Cools Surface
From: $83.00- Saves Energy by Reflecting Infrared Radiation With Advanced Ceramic Sphere Technology
- Ready-to-Use White Color Flat Finish
- Lower Summer Cooling When Applied to Walls & Roofs
- Cool metal surfaces like handrails in the hot sun
- Reduce Winter Heating When Applied to Inside Walls
- Thermal Heat Reduction & Waterproofing Coating
- Solar Reflective Index (SRI) of 81.2% & Thermal Emittance 87.4% Reflects Sunlight & Releases Heat on Walls and Roofs
- Flexible Elastomeric 200% Elongation Resists Cracking
- Tested to Stop a 98 mph Wind Driven Rain
- 5 Year Warranty Available
- Specified by Architects in 09900
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding...
From: $55.00- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
- Good water and salt chemical resistance.
- Good stain resistance.
- Prevents “dusting” by increasing strength of concrete
- Ideal as dustproofing sealer.
- Very fast dry time.
E811FP Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
From: $240.00- Exceptionally tough, flexible 1 part acrylic roof coating
- Excellent adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
- Resists growth of mildew
- Excellent flexibility 415% Elongation
- Resists cracking, splitting with building movement
- Available in 6 colors
- Underwriters Laboratories (UL) Tested & Certified
Extreme Bond Primer For Interior Exterior Hard Slick Glossy Wall Surfaces
- Promotes adhesion and bonding on hard to paint surfaces
- Glazed Tile, Plastic, Glass, Fiberglass, Glossy Surfaces, Kitchen Cabinets
- Tightly bonds to slick and glossy surfaces
- Assures uniform appearance of topcoats
- One coat application
- Fast dry
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Topcoat With Hi-Performance coatings such as epoxy, polyaspartic, urethanes, lacquers and both oil and water based acrylics
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
From: $45.00- Premium Grade Sealer and Water Repellent Offering a Nice Glossy Look
- For Concrete, Masonry, Brick, Wood
- Use on Painted or Unpainted Surfaces
- Adds Stain Resistance for Easier Cleanup
- Clear Finish Will Not Yellow
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
GT 6759 100% Silicone Roof Coating
$300.00- Ready to Use
- Highly Elastomeric
- Breathable membrane
- Superior weather and wat er resistance properties
- Excellent, long term durability
- Solvent and chemical resistant; UV Stable
- High Temperature Resistance (up to 350F)
- Reflects more sunlight than a traditional roof
- Solvent free/ diluent free
- Higher solids content
- less material needed and time saving due single coat applications
- Due to the high solids content, no pinholes or mud cracks appear after curing
- 100% silicone polymer, allowing it to expand and contract helping prevent leaks that may result in mold, mildew, wood rot and rust
- Withstands UV degradation
- Environmentally friendly
GT 6783 Low Solids Silicone Roof Coating
$290.00- More economical price per bucket
- Easier to spray and no need for specialized equipment
- Better sag resistance on sloped surfaces where two coat application is preferred such as high-sloped roofs and spray foam roofs
- Perfect for two-coat substrates
- Low solids coating can be used on existing asphalt roofs if an effective bleed block barrier is used to prevent the mineral spirits form attacking the asphalt
- An epoxy primer could be used for this purpose
- A low solid coating can be used without a primer on a single ply deck such as TPO, PVC, PPO , EPDM. The mineral spirits will cause the deck to swell improving adhesion.
- Ready to Use
- Highly Elastomeric
- Breathable Membrane
- Superior weather and water resistance properties
- Excellent ,long term durability
- Solvent and chemical resistant; UV stable
- High temperature resistance up to 350F
GT 6895 High Solids Silicone Roof Coating – High Build
$310.00- Can be applied up to 40 mils in single pass on roofs and vertical walls when needed
- 100% silicone polymer, allowing it to expand and contract helping prevent leaks that may result in mold, mildew, wood rot and rust
- Ability to achieve a coating of 40 mils in one pass
- Ready to Use
- Highly Elastomeric & breathable membrane
- Superior weather & water resistance properties
- Excellent, long term durability
- Chemical Resistant and UV Stable
- High Temperature Resistance up to 350F
- Reflects more sunlight than a traditional roof ; absorbs less solar energy
- Solvent Free & diluent free
- Higher solids content
- Less material needed and time saving due single coat applications
- Due to the high solids content, no pinholes or mud cracks appear after curing
- Withstands UV degradation
- Environmentally friendly
Hot
IronBack Steel Primer | Convert, Encapsulate, Stop Rust | Topcoat With Water & Oil Based Paint
From: $130.00- Reduce or eliminate grinding and dangerous sandblasting
- Converts and encapsulates steel to prevent future rusting
- Compatible with water and oil-based paints
- Contains no VOCs. Non-toxic. Environmentally friendly
- Converts rusted surfaces to stable black metal.
- Ready-to use, non-toxic, and environmentally friendly.
- Contains no VOC’s. Fast clean-up.
- Steel sheds and other steel structures
- Interior and Exterior Rusty Steel Surfaces
Hot
Mend-Con RTU Concrete Repair | Wet Conditions & Underwater | Vertical No Sag | Quick Cure | Pai...
$540.00- Repair in Wet conditions - Apply Underwater
- Great for Pool Repairs
- High strength epoxy
- Bonds to fresh or hardened concrete, stucco, wood, metal
- No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces
- Quick Cure Dries to touch 15 minutes, paint in 1 hour and drive on it in 8 hours (temperature dependent)
- 2x as strong as most concrete - Compressive strength 8000 psi
- Easy To Apply – Convenient ready-to-use cartridge system
- Wide application temperature 40°F – 100°F
- Paintable surface
- Comes in Case of 12 Cartridges & Cartridge Gun
Hot
PaintPlus | Epoxy-Like Toughness | Hard Wearing | Water Based | PerfectPrimer Topcoat | Easy to Use
$190.00- Easier to Apply than Traditional Epoxy Systems
- Cleans Up With Water
- Non-Toxic, Low VOC
- Durable and Flexible
- Chemical Resistant
- Low Odor
- Interior or Exterior Use
- Specified for Use with All PerfectPrimer Products
- Bonds Direct To Metal
Pebble Bond Epoxy | Used with River Rock Flooring
From: $98.00- Use with our River Rock Pebbles
- Eco-Friendly Damage: reduces runoff and supports sustainability
- Reduced Flooding: prevents pooling and drainage strain
- Permeable Design: Filters water into the ground
- Slip Resistant: Perfect for wet or high-traffic areas
- Weatherproof & Durable: Withstands extreme conditions
- Permeable Surface: Reduces runoff and supports drainage
- Low Maintenance: Easy to clean and long-lasting
Hot
PerfectCleaner Powder Concentrate | Clean Mastic, Epoxy, Concrete, VCT | Remove Grease, Oil, Wax, In...
From: $24.95- Effectively Cleans Surfaces Prior to application of wide variety of primers and other coatings
- Easy to use Powdered Concentrate
- Powerful, 100% water soluble solution fortified with natural citrus extracts
- Non-flammable, biodegradable and deodorizes as it cleans.
- Removes grease, oil, wax, and inks
- Works on metal, plastic, rubber, concrete, tile, wood, vinyl, formica, and many porous surfaces.
Hot
PerfectPaint Floating Floor Prep | Seal-Prime-Paint One Step | Asbestos Tile, Mastic, Glue, Cement |...
$470.00- SEAL - PRIME - PAINT all in one step wide range of dangerous and difficult flooring materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding to smooth, non-porous surfaces found in commercial offices and homes including VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead prior to application of vinyl, tile, wood or other resilient flooring
- Reduce surface prep, expense and project completion time
- No need for scraping, grinding, solvents, soy gels, or removal of mastics
- Molecular adhesion ensures a strong bond to difficult non-porous surface
- Leaves a nice paint finish to your flooring project
- Water based Non-Toxic, no harmful VOCs
- Cleans up with water
Hot
PerfectPrimer Sealer | Encapsulate Asbestos Tiles , Mastics, Glues, Cements | VCT, Vinyl, Linoleum, ...
From: $240.00- SEAL and PRIME dangerous and difficult floor materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding primer for smooth, non-porous surfaces: VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead before applying paint, coatings, or resilient flooring
- Molecular adhesion ensures strong bond to difficult non-porous surfaces
- Reduce surface prep, expense, project completion time
- No need to remove soy strippers, or grinding debris
- Topcoat with most cements, epoxies, paints, anti-static coatings.
- Water based Non-Toxic, (0) VOC's
Plugger 10 Clear Masonry & Wood Acrylic Flat Sealer
From: $46.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 3 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Plugger 25 Clear Acrylic Flat Sealer | Masonry, Concrete, Wood, Brick, Stucco | Water Repellent
From: $51.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
River Rock Pebbles | Used with Pebble Bond Epoxy
From: $110.00- Use with our Stone Bond Epoxy
- Eco-Friendly Damage: reduces runoff and supports sustainability
- Reduced Flooding: prevents pooling and drainage strain
- Permeable Design: Filters water into the ground
- Slip Resistant: Perfect for wet or high-traffic areas
- Weatherproof & Durable: Withstands extreme conditions
- Permeable Surface: Reduces runoff and supports drainage
- Low Maintenance: Easy to clean and long-lasting
Satin-Lok Wet Look High Gloss Acrylic Sealer | Concrete, Masonry, Wood, Brick | UV Resistant
From: $61.00- High Gloss Wet Look Acrylic Water Sealer
- UV Resistant Will Not Yellow
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
- Horizontal & Vertical Surfaces
- Indoor & Outdoor Projects
Universal Acrylic Metal Primer Pro-Cryl Paint
- Rust-inhibitive for steel, aluminum, galvanized steel
- Excellent corrosion-resistant primer
- Use with all acrylic, alkyd, urethane, epoxy topcoats – both solvent & water base
- Early moisture resistant
- Quick dry to recoat time for faster project turnaround
- Low temperature application down to 40F
- Use as bonding primer with Cool Coat Thermal Barrier Paint
- Available in red-oxide, gray and off-white
- Acceptable for use in USDA-inspected facilities
- Low VOC, water base, complies with SCAQMD & CARB
Wet Look High Gloss Acrylic Sealer For Wood & Masonry
From: $47.00- High Gloss "Wet Look" Acrylic Sealer
- Beautiful Appearance
- Interior and Exterior Surfaces
- For Concrete, Masonry, Brick, Stone, Wood
- Breathable Coating
- UV Resistant Will Not Yellow and Eco-Friendly
Copyright 2024 by Exterior Performance Coatings LLC