EPC Private Label
Showing 1–8 of 103 results
-
9″ Roller Frame For Epoxy, Urethane, Polyaspartic Coatings | Case of 12
- 9" Economical Roller Frame
- Sturdy 5 Wire Cage Plastic Endcaps
- Chrome Plated 5/16" Shank
- Plastic Threaded Grip For Extension Pole Use
- Sturdy 5 wire cage and plastic endcaps
-
AEROSIL R 202 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 22 lbs (10 kg) | Evonik
- Great thickening agent to wide range of coatings including epoxy and polyurethane coatings
- Allows coatings to be used as great concrete crack, hole, joint and spall repairs
- When mixed into fast cure epoxy, makes for very quick repairs
-
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polyaspartic
- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyaspartic coating
- Works well with high performance 2 part floor coatings
-
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | Apply Down to18°F | Quick Cure
- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Fast recoat 1-2 hours at 75°F & 50% R.H
- Cures down to 18°F dry and apply to 140°F
- High heat resistance up to 400°F dry
- Single component, easy to use
-
E1000 Epoxy Concrete Repair Kit | Holes to 1″ | Cracks | Spall | 3 Color
- Make quick, permanent repairs to concrete
- Patch cracks, spalled concrete and potholes
- Outstanding adhesion to concrete
- Excellent chemical, abrasion and impact resistance
- USDA approved for food processing plants
-
E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | P
- No sagging on vertical walls up to 12 mils per coat
- Good chemical and abrasion resistance
- Works well on underwater concrete decorative surfaces including pools and water features
- Long 45 - 90 min pot life
- Outstanding adhesion 475 psi @elcometer
-
E1015V Vertical Wall Epoxy Coating & Primer to 8 Mils No Sag | 11 Colo
- No sagging on vertical walls up to 8 mils per coat (4 mils DFT)
- Good for priming or coating concrete, wood or masonry.
- Good chemical and abrasion resistance
- Long 1 - 1.5 hour pot life
- Excellent adhesion 425 psi @elcometer
-
E1016 Anti-Slip Epoxy Concrete Floor Coating – 3 Gal Kit | 20 Colors | Tennis Court Like Surface
- Adds a slip resistant finish to concrete floors
- Good for use on surfaces subject to bare foot traffic
- Long 1 - 1.5 hour pot life
- Excellent adhesion
- Good chemical and abrasion resistance