White
Showing 17–24 of 47 results
-
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low
- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Cold temperature application down to 45F
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
-
E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interior
- Great Interior & Exterior Horizontal Concrete & Steel Protection
- Exceptional Exterior Durability
- Excellent weather resistance
- Non-chalking and non-yellowing
- Excellent gloss and color retention
-
E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Interior & Exterior | 21 Colors
- Great Interior & Exterior Vertical Concrete & Steel Protection
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
-
E398 High Build Acrylic Polyurethane | High Gloss
- Excellent weather resistance
- High Solids
- Low VOC
- Good chemical and stain resistance
- Excellent gloss and color retention
-
E5015 Epoxy Primer WB Coating | Concrete Wood Masonry | 20 Colors
- Versatile product good on concrete, masonry, wood surfaces
- Available in Clear and 20 Colors To Match With Topcoat
- Excellent as primer for epoxy, polyaspartic and urethane coating systems
- Helps prevent concrete outgassing problems when used as primer
- Long 1 - 1.5 hour pot life
-
E517M Flake Filled Epoxy Mastic Steel & Concrete Coating | Chemical Containment | Low Temp Cure 25F | Extremely Flexible
- Self Priming on steel
- Excellent as a primary containment coating for internal tank linings (when part of specified system)
- Excellent as a secondary containment coating
- Performs well over epoxy mortars and properly primed concrete surfaces
- Can be applied on damp surfaces
-
E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors – Walls
- May be applied on wet or under water surfaces
- Self-priming on steel and on most concrete applications
- Cold temperature cure down to 35F
- Ideal for marginally prepared and painted surfaces
- Outstanding impact and abrasion
-
E64 Rain Shield Elastomeric | Flexible 400% Elongation | 100% Acrylic | Ceramic Sphere Technology | Masonry Stucco Wood Metal Concrete | 800+ Colors
- Flexible Up to 400% elongation ASTM D412-87
- Resists Wind Driven Rain (Passes ASTM E96, TTC-555-B)
- Breathable, Thermal Barrier
- Excellent Adhesion
- Flexible: Performs very well in hot and cold environments