Biege
Showing 9–16 of 18 results
-
E700HV Epoxy | Exceptionally Tough | Abrasion & Chemical Resistant | No Topcoat Required
- Saves Money - Eliminates Need for Urethane or Polyaspartic Topcoat
- Extremely Tough D-90 Shore Hardness
- Exceptional Abrasion resistance Only 19 mg loss (Tabor test)
- Excellent Adhesion 420 psi
- Good Chemical Resistance
-
E707HB High Build 100% Solids Epoxy Floor Coating | 20 Colors
- High Build - 100% Solids Commercial Epoxy
- Long POT Life (working time) 30-50 min
- Excellent Adhesion 450 psi
- Abrasion resistant Only 32 mg loss (Tabor test)
- Good Chemical Resistance
-
E707LVP High Solids Epoxy Primer & Base Coat | Helps Prevent Outgassin
- High Solids Commercial Grade Epoxy Primer
- Helps reduce problems from concrete outgassing (air bubbles)
- Long POT Life (working time) 35-55 min
- Excellent Adhesion 430 psi
- Good Chemical Resistance
-
E811FP Acrylic Self Plasticizing Roof Coating | Monolithic Flexible Membrane
- Exceptionally tough, flexible 1 part acrylic roof coating
- Excellent adhesion for Concrete, Wood and Metal
- Tough surface, holds up to normal foot traffic
- Excellent weathering pass ASTM G93 for 9,000 hrs
- Excellent UV stability
-
E814CP Co-Polymer Flat Roof Coating | 11 Color | Flexible | Waterproof
- Exceptionally tough, SEBS Based waterproof 1 part roof coating
- Excellent adhesion to EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, Metal surfaces
- Great for both Flat & Sloped Roofs
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
- Excellent weathering
-
E814R Co-Polymer Liquid Rubber Roof Walkway Coating | Slip Resistant
- Exceptionally tough, druable one part waterproof roof walkway
- Offers excellent anti-slip walking surface
- Excellent adhesion and works on most roof surfaces incl EPDM, APP, TPO, Hypalon, Fiberglass, PVC, Polyurethane Foam, Concrete, Wood, and Metal.
- Available in 12 colors
- Excellent waterproof with E96 Vapor Transmission Class I 0.025 perms and Water Absorption 0.04%
-
GroundWorx Basics (SF) ESD Static Conductive Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
- Water - based epoxy, matte finish
- Conductive range 2.5 x 104 - 3.5 x 107 ohms
- System Resistance (w/ ESD Footware) < 3.5 x 107 (fully compliant) ANSI/ESD STM 97.1
- Great low cost solution for concrete, wood, VCT Tile floors
- Extended working time - POT life 40+ minutes
-
GroundWorx Basics (SF) ESD Static Dissipative Epoxy Floor Coating | Water Based | ANSI/ESD S20.20-2014
- Water - based epoxy, matte finish
- Static Dissipative 10e6 - 10e9 ohms
- Great low cost solution for concrete, wood, VCT Tile floors
- Extended working time - 40+ minutes
- Quick turnaround - Light traffic 12 hours after application