Specialty Coatings
Filter By Category
Questions about our products?
Call us for help picking the correct solution for your project. (630) 675-4509
Showing 101–150 of 164 results
-
DR OptiShade 15i Dual Reflective Window Film | Rejects 74% Infrared Energy | 16% Visible Light Transmission | Blocks 99% UV | Warm Earth Tone Color
- Lower Cooling Costs with Maximum Reduction of Daytime Temperatures
- Excellent Solar Energy Rejection of 73%
- Blocks 99% of UV Radiation
- Lets 16% of Visible Light Through
- 82% Glare Reduction
-
DR OptiShade 25i Dual Reflective Window Film | Rejects 63% Infrared Energy | 27% Visible Light Transmission | Blocks 99% UV | Warm Earth Tone Color
- Lower Cooling Costs with Maximum Reduction of Daytime Temperatures
- Excellent Solar Energy Rejection of 61%
- Blocks 99% of UV Radiation
- Lets 27% of Visible Light Through
- 70% Glare Reduction
-
R Silver 20X Exterior Heat Reflective Window Film | Rejects 81% Infrared Energy | 17% Visible Light Transmission | Blocks 99% UV | Silver Color
- Lower Cooling Costs with Maximum Reduction of Daytime Temperatures
- Excellent Solar Energy Rejection of 81%
- Blocks 99% of UV Radiation
- Lets 17% of Visible Light Through
- 81% Glare Reduction
-
EZ-Coat Textured Acrylic Coating | Metal, Wood, Concrete | Textured Finish | Scratch Resistant
- Excellent flow rate for an Easy application
- Flexible and not brittle
- Easy to touch up or maintain
- Low Odor
- Low VOC
-
E2.8 Poly-Chemcure Primer | Fast Recoat | Low-Temp | OEM/Steel Fabricator
- High performance primer can be prepared on carbon steel, galvanized steel and aluminum
- Recoating in 90 minutes is possible for maximum productivity
- No induction time and longer pot life will improve productivity
- A smooth, sandable primer at 3 mils DFT over abrasive blasted or power tool cleaned substrate is needed for additional corrosion resistance
- Application by brush and roller, in addition to spraying, may be necessary
-
6210 ESD Polycoat Anti-Static Floor Paint | Dissipative | Clear | ANSI/ESD S20.20-2014
- Suitable for dissipative packaging outlined in ANSI/ESD S20.20
- Resistance: 10e6-10e9 ohms/sq when tested to ANSI/ESD STM11.11 88
- Dissipative Coating
- Water-based polyurethane with zero VOC
- Reduces tribocharging
-
4040 Universal Cleaner Concentrate | Use on Electronic Manufacturing, ESD Floor, Concrete Floor | Degreaser
- Powerful degreaser
- Safe for ESD tile, epoxy and paint
- Neutral pH
- No phosphate, ammonia or bleach
- Dilution ratio 5:1 (5 parts water to 1 part cleaner)
-
E671 UV Resistant Epoxy Floor Coating | Clear | 100% Solids | For Metallic Pigment and Full Flake & Quartz Systems
- Clear epoxy great for use with metallic pigments and full flake or quartz broadcast systems
- UV Resistance Additive in Coating
- High Build – 100% Solids Commercial Epoxy
- Good Adhesion 350 psi
- Good Chemical Resistance
-
Skyway Bird Film | Reduce Bird Strikes | Optically Clear | UV Protection | Scratch Resistant
- Cost-effective, retrofit solution to effectively reduce bird strikes
- Recommended by the American Bird Conservancy as a 'Product that reduces bird collisions' Material Threat Factor of 15
- Compliant with North America Bird0safety building codes and guidelines such as: GSA 3.6.7 BIRD-SAFE BUILDING DESIGN (us) CSA A460:19 Bird Friendly Design Standard (Canada) LEED Innovation Credit v4.1 Bird Collision Deterence Adheres to emerging state and municipality bird-safety legislation
- Film does not distract from interior viewing or alter building aesthetics
- Pressure-sensitive adhesive creates exceptional ease of installation
-
EcoScrub Floor Stripper/ Degreaser
- Rinse-free formula
- Low foaming
- No environmentally toxic preservatives
- Low Odor
- Non caustic
-
Bio-Dur E561 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 40-60 mils One Coat | 100% Solids
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and Overhead Application | Can Apply Underwater
- Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities
- Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas
- 100% Solids
- VOC Free
- Strong yet lightweight filler
-
Bio-Seal E907 Resin | High Heat Tolerance | Quick Return to Service
- Saturation Resin: For use with reinforcing fibers and fabrics to create composite repairs of tank tops, pipes or similar structures
- Pressure Transfer Compound: Very high compressive strength and modulus provides an excellent material for void and annulus filing of pipe sleeves, void spaces, etc.
- Penetrating Sealer: Use to seal and protect concrete, brick and other similar surfaces against chemical attack and water penetration
-
Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Sel
- Loading Docks: Used with aggregate to add durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- High Temperature Exposure: Added high temperature components provide increased temperature resistance to dry heat and direct contact
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
EE-70 Amine Cured 100% Solids Spray Apply Epoxy | Secondary Containment | NSF 61 Potable Water | USDA | Chemical Resistant | Tanks | Floors | Pipes
- Secondary Containment Application
- Can be applied to damp or wet substrates
- 100% Solids
- Chemical and Abrasion Resistant
- Immersion and Non-Immersion Service
-
EE-71 Amine Cured 100% Solids Novolac Epoxy Topcoat| Secondary Containment | Chemical Resistant | USDA | 100% Solids
- Used in Aggressive Environments with Exposure to Acids and Alkalis
- Chemical Resistant
- Excellent Flexibility
- High Abrasion Resistance
- Hand or Spray Application
-
EE-72 Novolac High Heat Epoxy | Immersion to 245ºF | Dry Heat to 400ºF (3 Hrs) | Secondary Containment | Chemical Resistant | USDA | 100% Solids
- Strong chemical resistance to acids and alkalis
- High Heat Environments
- Immersion Service to 245ºF
- Dry Heat to 400ºF (3 Hrs)
- High Build Formula to 100 mils DFT (dry film thickness) in One Coat
-
EE-80 Solids Epoxy Pre-Primer | Structural Steel, Tanks, Waste Water | Chemical Resistant | USDA | 100% Solids
- Low Viscosity Epoxy
- Increases Adhesion of Coating System to Metal Surfaces
- Tough, Water Resistant Coating
- 100% Solids
-
E1703 Epoxy Concrete Primer & Sealer | 100% Solids | Chemical & Abrasion Resistant | Easy to Apply | Low VOC
- Outstanding as a primer on concrete
- Good abrasion resistance
- Excellent adhesion to concrete surfaces
- Used as a clear sealer for concrete floors
- Non-toxic when cured
-
Chem-Put E32 High Build Epoxy Coating for Chemical Exposures | 100% Solids
- Concrete Repair: High Build Application allows for concrete resurfacing after attack by chemical exposure
- Marine and Offshore: Heavy Duty Repair and sealing compound in wet environments
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Tank Lining: High hydrocarbon chemical resistance with early return to service makes an ideal high build tank lining
- 100% Solids
-
E116 Rust Inhibitive Epoxy Primer
- Excellent rust preventing properties
- Excellent resistance to "under cutting"
- Good flexibility and abrasion resistance
- Long recoat up to 6 months
- Outstanding adhesion and "wetting out" ability
-
E603 Non Skid Epoxy | Truck Bed Liner | Anti-Slip
- Provides safer footing and traction
- Heavy duty non-ski resistance
- Provides excellent slip resistance
- Good water, salt and chemical resistance
- Excellent coating for Diamond Plate
-
S16 Epoxy Coating | Metals | Immersion Service | NSF 61 Potable Water
- Protective Coating for Metals
- Immersion Service
- Approved in Testing for use with Potable Water
- USDA for Incidental Food Contact
-
ESD 640 Textured Conductive Vinyl Chair Floor Mat Protects Anti-Static Floors | Meets ANSI 20.20
- Resistant to acids, reducing agents, detergents, alcohols, hydrocarbons, mineral oil, amines and aldehydes
- Black, pebble-embossed textured surface
- Single layer .080" (2.032 mm) thickness
- Conductive, <1e6 ohms ANSI/ESD S7.1
- Operating Temperature -20F to 200F (-29C to 93F)
-
E77 Fast Cure Epoxy Concrete Primer & Base Coat | 15 colors
- Ideal for a base coat for flake floors
- Good chemical, abrasion and impact resistance
- Outstanding adhesion and "wetting out" properties
- Used as a primer for pigmented polyurethanes
- Excellent as a primer for polyaspartics
-
E104 Primer Moisture Cured Urethane Zinc Rich Primer
- Excellent "wetting out" and adhesion to sound rusty steel
- Fast recoating within 4 hours at 75F
- Cures down to 25F on dry surfaces
- "Open" recoat window with proper cleaning
- Passed 1,500 hours in salt spray cabinet
-
EE-121HT Amine Cured 100% Solids Novolac Epoxy | Top Coat | High Heat
- Temperature resistance up to 500F (dry) and spike to 580F (3 hours)
- Strong chemical resistance
- 100% solids
- Very good abrasion
- Great for aggressive, industrial applications
-
Polyurea Basecoat for Concrete Floors | Low Temp 20°F | 100% Solids
- Low VOC Formulation low Odor Minimal Downtime Fast Dry Time Warm Temp Workability & Cure Superior Impact Resistance Superior Tensile & Tear Strength Excellent Elongation Strong Adhesion Broadcast Compatible
-
Spraythane FL Epoxy & Urethane Topcoat | Immersion Service | 100% Solids
- Tough and Flexible Resilience
- Immersion Service
- High Tear Resistant
- High Impact Resistant
- Combat Cavitation and Abrasion
-
EE-10 Epoxy Primer | 98% Sulfuric Acid Immersion Service | 100% Solids
- Excellent for 98% Sulfuric Acid Immersion
- Strong Chemical Resistance
- Good in aggressive acid environments
- Immersion and Non-Immersion Service
- Work on Ferrous and Non-Ferrous Metals & Concrete
-
EE-95 Novolac Epoxy Rebuild | 100% Solids | Restoration | Vertical
- Rebuild any pit repair
- Smoothing or leveling of vertical areas
- Solvent Free
- VOC Free Product
- Strong chemical resistance
-
ARCRETE Epoxy Primer & Rebuild | Horizontal | Secondary Containment| Repair, Smooth or Level |100% Solids
- Rebuild for Repair, Smoothing or leveling of Horizontal Areas
- Solvent and VOC free product
- Used in High Build Areas
- Chemically Resistant
- Rapid Turnaround
-
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
- Penetrating Primer Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
-
Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable
- Loading Docks: Generally used with aluminum oxide abrasive for maximum durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid.
- Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color.
- High Gloss
- 100% Solids
-
GasPruf E132 Reinforced Epoxy Coating
- Anticorrosive Coating: "Super-Duty" anticorrosive for in-service fuel storage tank interiors and roofs
- Repair Compound: Patching, leak sealing etc. above and below water or hydocarbon fuels
- Displaces water or hydrocarbons such as gasoline or diesel fuel from wetted surfaces
- Solvent Free
- 100% Solids
-
Tower-Gard E568 Anticorrosive Coating for Steel and Galvanizing
- Anticorrosive Coating: For structural steel and galvanized surfaces in atmospheric service. Tower-Gard E568 is uniquely tolerant of compromised surfaces. Tower-Gard E568 can be applied over all types of tightly adherent existing coatings as well as to bare steel or galvanizing.
- Displace water from wet surfaces
- Use in Underwater
- Low Toxicity
- Ships Non-Hazardous
-
SLR-20 Epoxy & Urethane Hybrid | High Elongation | Elastomeric | Impact & Tear Resistant
- High elongation and elastomeric
- High Resilience
- Tear Resistant
- Impact Resistant Flooring/ Coating
-
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
-
Bio-Dur E560 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 30-40 mils DFT One Coat | 100% Solids
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Bio-Dur E3000 Wet Surface High Temperature Epoxy Coating | Up To 350°F
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Tg coating with hard, abrasion-resistant pigmentation
- Repair Compound: Patching, leak sealing, etc. above and below water
- Wastewater: Reinforces, smooths, and protects concrete exposed to chemical or municipal waste
-
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Composite Resin: Works well with fiberglass and carbon fabrics to create field-applied composites
- Mortar Repair: Effective epoxy resin for making epoxy strengthened mortar. Excellent for industrial applications such as pump bases
- 100% Solids
- Formulated with no volatile solvents
-
Bio-Seal E206 Epoxy Coating | High Temperature Application | 100% Solids | VOC free | Up to 40 mils
- High Temperature Coating: for pipelines, tanks and other equipment. Provides outstanding protection against environment exposures and hydrocarbons
- High Temperature Service
- Ambient Hardening
- Single coat application up to 40 mils
- Long overcoat window
-
ESD Cleaning Buffing Pads | Use with Eco Scrub Degreaser
- Gray Scrub Pad provides great initial maintenance for light to moderate soiled floors
- Maroon Scrub Pad provides great maintenance for moderate to heavy soiled floors
- Use for both sides of scrub pad
- 1,500 square ft coverage
- Enhanced cleaning for ESD floor systems
-
4018 Acrylic Dissipative Floor Finish
- Covers 2 coats of approximately 750-1000 sq ft per gallon
- VOC <4%
- 18% Solids, ±5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
-
Staticide General Purpose | Static Control for All Surfaces
- Formulated for non-porous surfaces
- Works with our selection of Anti-Static Mats
- Exceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria
- Meets requirements for topical anti-stats as listed in DOD-HDBK-263
- Proven effective in relative humidity below 15%
-
Bio-Gard E255 Severe Service Epoxy | Surface Tolerant Chemical Resista
- Chemical Resistance Areas: Designed for applications where resistance to aggressive chemicals is needed
- Industrial Maintenance: Heavy duty lining for steel and concrete where extreme resistance to aggressive chemicals such as 50% caustic soda or 98% sulfuric acid is required
- Marine and Offshore: Heavy duty repair and sealing compound for steel exposed to chemical or physical attack
- VOC Free
- 100% Solids
-
E275 High Build Polyamide Epoxy Mastic | Chemical Resistant | Excellent Adhesion to Steel
- Excellent adhesion to steel
- Meets USDA Requirements
- A high build primer or finish coat
- Excellent against "undercutting"
- Can be applied up to 12 mils DFT
-
Bio-Chem E330 High Performance Epoxy | 100% Solids | Aggressive Chemical Exposures | High Heat
- Down-Hole Tubular Coating: Id and OD coating, especially suitable for "Ruffcoat" OD treatment
- Tank Lining: High hydrocarbon chemical resistance and early return to service make Bio-Chem E330 an ideal high build tank lining
- Hopper Car Lining: excellent physical and chemical resistance properties
- Concrete Containment: Excellent physical and chemical resistance properties
-
E1875 Epoxy Resin | Chemical Resistance | 100% Solids
- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 70% Sulfuric Acid, 37% HCL and 50% Sodium Hydroxide
- Extremely tough with high wearing properties
- Excellent abrasion and impact resistance
- Good adhesion to concrete
-
E398 High Build Acrylic Polyurethane | High Gloss
- Excellent weather resistance
- High Solids
- Low VOC
- Good chemical and stain resistance
- Excellent gloss and color retention