Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
AEROSIL R 202 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 22 lbs (10 k...
$575.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in 22 lb bags
****TRUCK FREIGHT SHIPPING ONLY - MIN ORDER 5 BAGS****
Aluminum Oxide High Wear Abrasion Resistant Additive | 220 Grit | 325 Grit for Urethane & Polya...
From: $31.00- Significantly improves abrasion resistance of floor coatings
- Helps create a tough, durable, abrasion resistant surface
- Simple and easy to add while mixing a coating
- Works with any urethane and thin film polyasprtic coating
- Works well with high performance 2 part floor coatings
- Does not change physical properties of the coating
- Well bonded into the body of the coating
- High hydrolitic stability
- White Color in options 220 grit and 325 grit
AM322HW Anti-Microbial Mildew Resistant Aliphatic High-Gloss Urethane Low Temp 45°F
From: $212.00- Tough, durable high performance urethane
- Anti-Microbial prevents growth of micro-organisms
- Resists growth of surface mold, mildew, fungus and helps prevent odors that can result
- Outstanding impact resistance 160 in lb (Gardner test)
- Excellent abrasion resistance 22 mg loss (Tabor test) Drops to 10 mg adding High Wear 325
- Excellent Chemical Resistance
- Aliphatic, UV Stable. will not yellow
- Easy to Use Long 2-4 Hour Pot Life
- Great for Indoor & Outdoor Projects
- Wide Variety of Clear and 18 Colors
- Solvent Based - Excellent adhesion
CLEAR-SEAL 100% Urethane High Gloss Super Premium Sealer
From: $176.00- High Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL 100% Urethane Low Gloss Super Premium Sealer
From: $176.00- Low Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CoatZF ESD Low-VOC Dissipative Clear Floor Finish | Static Control | ESD and Non-ESD Floors | 5 Gall...
$450.00- Zinc-free
- Static dissipative (1 x 10E6 to < 1 x 10E10 ohms) Coating - ANSI/ESD STM7.1 and ESD TR53
- Low tribocharging (<100 volts) coating - ANSI/ESD STM97.2
- 23% Solids- 2 Coat System** Reduces labor needed for initial install and on-going maintenance of the floor
- Hard, wear resistant – ASTM Standard D2134.93
- UL listed for slip resistance
E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | App...
From: $55.00- Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces
- Excellent “wetting out” properties and performance over sound rusty surfaces
- Outstanding abrasion & chemical resistance
- Very good weather resistance
- Excellent corrosion resistance, passed 1,200 hrs in salt cabinet
- Fast recoat 2-3 hours at 75°F & 50% R.H
- Cures down to 18°F and apply up to 140°F
- High heat resistance to 400°F dry
- Single component, easy to use
- Topcoat with most Epoxy, Urethane , Silicone
- Excellent barrier coat over lead based coatings
- USDA Approved
E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling
From: $85.00- Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas
- Excellent adhesion and sealer for concrete, wood and masonry surfaces.
- Extremely hard, yet flexible film.
- Outstanding “wearing properties
- Highly resistant to abrasion and impact.
- Excellent stain resistance.
- Keeps concrete dusting down.
- Good chemical resistance.
- Easy to clean and maintain.
- Quick recoat as soon as 1-2 hours
- One component, easy to use - No mixing 1-2 hour POT Life.
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E343 Quick Fix Concrete Repair Epoxy Urethane Patch Kit | 10 Min Light Traffic | Low Temp 20°F
From: $57.00- Extremely Quick - Walk on it 10 minutes, Full Serivce 1 hour
- Tough Durable Repair as hard as concrete
- Good for use interior & exterior repairs
- Low viscosity Product for Outstanding Adhesion and Deep Penetration of Cracks
- Comes in both small and large patch kits including silica sand and liquid only options
- Use With Sand For Improved Performance and lower repair costs
- Low viscosity (30 cps) Can be Used Without Sand to Penetrate Very Small and Deep Cracks
- Great for cold weather application down 20°F or warm weather up to 90°F
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta...
From: $70.00- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use one part with Long 3-5 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Solvent Based With Excellent adhesion
E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls
From: $118.00- Great Interior & Exterior Vertical Concrete & Steel Protection
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E5030CL Urethane Clear Sealer / Topcoat WB
From: $55.00- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
- High Gloss (>80 at 60 degrees)
- Flexible (120% Elongation at break)
- Water based
E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant
From: $64.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Very Low voc 35 g/L, water based formula
E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeab...
From: $50.00- Outstanding durability with impact resistance of 120 in lb (Gardner Impact test)
- Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Great for Indoor Concrete Floor Projects
- Low odor, water based formula
- Vapor Permeable Topcoat
E5829 Flexible Epoxy Urethane Interior Expansion and Control Joint Sealant
From: $160.00- Flexible interior joint filler - Elongation 50.4% at 70F (ASTM D-412)
- Good for both expansion and control joints
- Great for general industry applications
- Hybrid epoxy urethane 2 component formula
- 100% solids with 0 voc
- Long 30-40 minute working time
- Low odor
- Paintable surface
E5830 Flexible Interior Expansion & Control Joint Sealant | Fast Set | Cartridge Applied
From: $55.00- Flexible interior joint filler and sealant- Elongation 100%
- Easy Dual Cartridge Applied System
- Quick setting with light foot traffic in as little as 1 hour
- Excellent abrasion resistance
- 100% solids with 0 voc
- Low odor
- Paintable surface
E903M Urethane Cement High Build Mortar | Wet Heat to 200F | Hot Oil & Water Wash | Resist Fung...
From: $200.00- Excellent heat and thermal shock resistance to 200F
- Very good chemical resistance to organic and inorganic acids and solvents
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Seamless hygienic finish with no grout lines
- High build repairs to 1"
- Excellent bonding characteristics
- Low odor, fast installation and fast cure.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
E903SL Urethane Slurry | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Resi...
From: $100.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-skid surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red and 2 package sizes
- E903SL Urethane Slurry is the high performance basecoat to the E903TC Urethane Top Coat high heat System
E903TC Urethane Topcoat | High Wet Heat 200F | Hot Oil & Water Wash | Moisture & Fungi Res...
From: $100.00- Excellent heat and thermal shock resistance to 200F wet heat
- Very good chemical resistance to organic and inorganic acids and solvents
- Excellent Moisture vapor transmission to 12 pounds per 1,000 sq. ft. over a 24 hour period as per ASTM E1907
- Resistant to Fungi Growth: Passes rating of 1 @ ASTM G-21
- Good anti-slip surface
- Excellent bonding characteristics
- Great protection for food and beverage industry, food processing plants, dairy farms, industrial kitchens and wine cellars.
- Low temp application down to 45F
- Available 3 colors gray, tan and tile red
- E903TC Urethane is the high performance topcoat to the E903SL Urethane high heat Slurry System
GroundWorx Ultra (HB-97.2) ESD Urethane Top Coat | Static Dissipative or Conductive | ANSI S20.20-20...
From: $1,350.00- Optional Static conductive <1.0 x 10e6 ohms or Dissipative >1.0 x 10e6 ohms and <1.0 x 10e9 high performance electrical protection, limiting Static Charge Generation to <15 volts
- Great for high traffic, high wear commercial & industrial applications as high build 14 mil ESD system at <$4.00/sq' material cost
- Conforms to ESDA, ANSI standard S20.20-2014 when used with GroundWorx Ultra ESD Epoxy Primer
- Use on Concrete, Wood and old VCT surfaces
- Tough surface: impact resistance 140 psi and tabor abrasion test 25 mg loss
- Surface: Anti-slip, ROHS compliant
- No wax required – easy to keep clean
- Satin to Semi-gloss sheen
- 8 standard colors & custom colors available
- Each 2 gallon kit includes 8 oz anti-slip clear glass beads for improved safety in wet conditions
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Low Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Semi Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
HDK H18 Fumed Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | (10kg) 22 lbs | W...
$475.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in (10 kg) 22 lb bags
****TRUCK FREIGHT SHIPPING ONLY - ONLY SELL IN LOTS OF 5 BAGS****
HyperCRETE Urethane Slurry | High Wet Heat 200F & Dry Heat 300F | Hot Oil & Water Wash
$265.00- Excellent heat and thermal shock resistance
- Very good chemical resistance to organic and inorganic acids and solvents
- Quick 4 hour recoat and 12 hour full service times
- Works great for commercial kitchens and industrial areas subject to hot water and hot oil spills
- Excellent bonding characteristics
- Rapid curing and harnders
- No VOC's and no odor
- Low temp application down to 45F
- Available 2 colors tile red and gray
MuralGuard Clear Anti-Graffiti Coating | Protect Murals & Public Art to 15 Years | Non-Sacrific...
From: $44.00- Outstanding Protection of Painted Murals and other Public Art projects
- Warranted to sustain repeated graffiti removals to 15 years
- Easy to Clean Graffiti Removal with Level 10 Cleanability Level (ASTM D6578/D6578M-13) & Level 1 Cleanability (ASTM D7089-06)
- Over 160 graffiti cleaning cycles without damage to this tough, 2 part coating
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Comes in a Clear, Matte, Satin and Gloss finish
- Excellent Adhesion
- Great Chemical Resistance
NE5928 Interior Expansion & Flexible Joint Novolac Chemical Sealant
From: $146.00- Flexible joint filler - Elongation 43.4% at 70F (ASTM D-412)
- Outstanding chemical and impact resistance
- Novolac epoxy urethane hybrid formula
- Excellent adhesion 420 psi
- 100% solids with 0 voc
- Low odor
- Paintable surface
Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | ...
From: $68.00- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin, Matte or Super Matte (nearly flat) Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- For Concrete, Brick, Wood, Metal, Tile (glazed & unglazed)
Sipernet 22 LS Silica Thickening Agent For Epoxy Concrete Crack and Joint Repair | 20 lbs | Evonik
$195.00- Great thickening agent for use with wide range of epoxy, polyurethane and other coatings
- Allows coatings to be used as great concrete crack, hole, spall and control joint repair for larger projects
- When mixed into fast acting products, makes for very quick repairs
- Many other industrial uses
- Comes in 20 lb bags
****TRUCK FREIGHT SHIPPING ONLY - MIN ORDER 5 BAGS****
VandlGuard IsoFree Urethane Non-Sacrificial Anti-Graffiti Painted Wall & Mural | Low Temp 40°F ...
From: $81.00- "Best in Class" Graffiti Protection for the Toughest - Most Important Projects
- Warranted to sustain repeated graffiti removals up to 15 years and 165 graffiti removals
- Save 50% to 66% in labor application costs with 1 coat protection vs other 10 yr products
- Easy to Clean Graffiti Removal with low cost commercially available solvents
- 160+ graffiti cleaning cycles without damage
- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin or Matte Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- Concrete, Brick, Wood, Metal, Plastic, Vinyl
VandlGuard Single Part Urethane Anti-Graffiti Wall & Mural Protect 10 Yr | Low Temp 40°F
From: $215.00- Premium Non-Sacrificial Anti-Graffiti Coating
- ASTM D7089-06/D6578 for Easy Level 9 Cleaning!
- Warranted to sustain repeated graffiti removals to 10 years with and up to 50 graffiti removals
- Matte Finish, Satin or High Gloss Option
- UV Resistant Will Not Yellow
- Good Chemical Protection
- Excellent Adhesion
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Concrete, Block, Brick, Wood, Painted Metal, Vinyl
VandlGuard Two Part Urethane Anti-Graffiti Wall & Mural Protect 10 Yr | Low Temp 40°F
From: $228.00- Super Premium Non-Sacrificial Anti-Graffiti Coating
- ASTM D7089-06/D6578 for Easy Level 9 Cleaning!
- Warranted to sustain repeated graffiti removals to 10 years and 60 graffiti removals!
- Quick cure graffiti removal only 24 hrs after applied
- Matte Finish, Satin or High Gloss Option
- UV Resistant Will Not Yellow
- Excellent Chemical Protection
- Excellent Adhesion
- Unpainted / Painted Surfaces
- Water Base, Low VOC, Eco-Friendly
- Concrete, Block, Brick, Wood, Painted Metal, Vinyl
Whiteboard Paint Dry Erase Water Based Polyurethane Coating
From: $65.00- Turns almost any surface into a Dry Erase Whiteboard
- Comes in Clear or White Color
- Write on it only 72 hours after application
- Tough, Durable, Long Lasting Dry Erase Surface
- Scratch Resistant
- Great Chemical and acid resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- Non-yellowing & UV resistant topcoat
- Odor Free and Zero VOC's
- Water Based and Non-Flammable
Copyright 2023 by Exterior Performance Coatings LLC