Prime, Prep & Repair
Filter By Category
Questions about our products?
Call us for help picking the correct solution for your project. (630) 675-4509
Showing 101–113 of 113 results
-
ARCTHANE Epoxy & Urethane Caulk | 500% Elongation | Expansion Joint Sealing & Crack Repair
- High elongation and elastomeric
- Flexible resilience
- Improved water & chemical resistance
- Strong Expansion Joint Sealing & Crack Repair
- 100% Solids
-
Bio-Seal E197 Epoxy Primer Sealer & Coating | Low Viscosity | Solvent Free
- Penetrating Primer Sealer: Used to seal and protect concrete, brick and other similar surfaces against chemical attack and water eventration which could lead to freeze- thaw damage
- Reinforcing Sealant: When applied to bare sheetrock surfaces, will penetrate the entire fiber surface and cure to a hard, tough, damage resistant layer. Especially suitable for applications where frequent contact with gurneys, trolleys and similar equipment is anticipated
- 100% Solids
- VOC and Odor Free
-
Bio-Seal E192 Epoxy Sealer | Repair, Reinforce & Mortar Resin | Wet Surface Resin / Fiberglass
- Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to freeze-thaw damage
- Repair Mortar Resin- used to prepare repair and smoothing mortar by stirring in clean silica sand. Typical sand loading of 100 lbs sand per three (3)gallons of Bio-Seal E192
- 100% Solids
- Formulated with no volatile solvents
- Application in Damp or Wet Surfaces
-
Bio-Seal E199 Chemical Resistant Penetrating Epoxy Primer Sealer | 100% Solids
- Penetrating Primer Sealer- used to seal and protect concrete, brick and similar surfaces against chemical attack and penetration by water leading to chloride and freeze-thaw damage
- Composite Resin: Works well with fiberglass and carbon fabrics to create field-applied composites
- Mortar Repair: Effective epoxy resin for making epoxy strengthened mortar. Excellent for industrial applications such as pump bases
- 100% Solids
- Formulated with no volatile solvents
-
ESD Cleaning Buffing Pads | Use with Eco Scrub Degreaser
- Gray Scrub Pad provides great initial maintenance for light to moderate soiled floors
- Maroon Scrub Pad provides great maintenance for moderate to heavy soiled floors
- Use for both sides of scrub pad
- 1,500 square ft coverage
- Enhanced cleaning for ESD floor systems
-
Staticide General Purpose | Static Control for All Surfaces
- Formulated for non-porous surfaces
- Works with our selection of Anti-Static Mats
- Exceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria
- Meets requirements for topical anti-stats as listed in DOD-HDBK-263
- Proven effective in relative humidity below 15%
-
PerfectPrimer Sealer | Encapsulate Asbestos Tiles , Mastics, Glues, Cements | VCT, Vinyl, Linoleum, Wood
- SEAL and PRIME and ENCAPSULATE wide range of dangerous and difficult flooring materials: asbestos, lead, mastics, glue, cements without need for expensive removal
- Great bonding primer for smooth, non-porous surfaces found in commercial offices and homes including VCT, ceramic tile, vinyl, linoleum
- Safely encapsulate, rather than grind asbestos and lead prior to application of coating, paint or resilient flooring
- Molecular adhesion ensures a strong bond to difficult non-porous surface
- Reduce surface prep, expense and project completion time
-
Grip E751 | Annulus Void Filler | High Temperature Tolerant | Long Working Time
- Fills large void areas and annulus
- Low exotherm and low viscosity
- Solvent Free Formulation
- No VOC or odor concerns
- Long Pot Life
-
Bio-Fix E913 | Quick Epoxy Repair | Above or Below Water Application
- Adhesive: Excellent all-purpose adhesive for use above and below water with excellent temperature resistance
- Repair Compound: Patching, leak sealing, etc. above and below water on steel and concrete substrates
- Pressure Transfer Compound: Rapid curing and high build for quick fix dent filling. Acts as pressure transfer material for FRP repairs
- Above or Below Water Application
- Quick Curing
-
Staticide ESD Mat Cleaner | Static Dissipative Neutral Cleaner | No Alkali or Ammonia
- Maintains the original resistivity of anti-static mats
- Works with our selection of Anti-Static Mats
- Cleans, rejuvenates and extends the life of the ESD mats
- Contains no alkali, ammonia or isopropyl alcohol
- No GHS classification, no REACH or RoHS SVHC
-
Staticide Heavy Duty Low Lint Wipes
- 12" x 13" 1/4 fold, available in white and blue
- Use in conjunction with our Staticide ESD Mat Cleaner
- Hydroentangled 55% Cellulose/45% Polyester nonwoven wipe
- Suitable for ISO Class 6+ (Class 1000) cleanroom environments
- Binder-free; no chemical residue
-
Industrial Fiberglass Tank Repair Kit | Quick Cure Composite Patch System
- Complete Patch Repair System
- Fast One-Hour Repairs
- Repairs Leaks, Holes & Dents
- High Strength Fiberglass Reinforcement
- Chemical-Resistant Epoxy Protection
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.