Call us (630) 675-4509
Show
Filter by
Filter by
Filter by
Hot
5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids
From: $149.00- Beautiful Decorative High Gloss Appearance
- Cold Temperature Application to 30F using Fast Set
- Easy Squeegee/Roller Application
- Waterproof, Aliphatic Resists UV Non-Yellowing
- Indoor & Outdoor Floor and Countertop Projects
- Good In Submerged Service Projects Like Fountains
- Works well on concrete, brick, steel, wood, fiberglass
- Excellent Chemical & Abrasion Resistance
- Highly Adhesive, Flexible & Non-Brittle
- Optional Fast or Slow Set, High Heat & Humidty
- Great For Garage Floors Using Chips & Flakes
- Commercial and Industrial Applications
- Use as Stand Alone System or Topcoat to Epoxy
CLEAR-SEAL 100% Urethane High Gloss Super Premium Sealer
From: $176.00- High Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL 100% Urethane Low Gloss Super Premium Sealer
From: $176.00- Low Gloss Super Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- Chemical and Spill Resistant
- Excellent Adhesion
- Anti-Slip Finish Available
- For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood
- Specified by Architects in 099123, 099723, 099313
CLEAR-SEAL High Gloss Acrylic Urethane Sealer
From: $79.00- High Gloss Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099123
CLEAR-SEAL Low Gloss Acrylic Urethane Sealer
From: $84.00- Low Gloss Premium Sealer
- Hot Tire Pickup & UV Resistant
- Great For Driveways, Walkways, Decks, Wall Murals
- Water Base, Low VOC, Eco-Friendly
- 5 Year Labor & Material Warranty
- Specified by Architects in 099123
E1900 Polyaspartic Clear | 40-50 Min Work Time | High Solids | Apply 40°F – 100°F | Chemical A...
From: $260.00- Excellent Clear Top coat for decorative flake and quartz granule systems and solid color epoxy coatings.
- Fast set
- Resistant to hot tire pick up.
- Highly resistant to chemical, abrasion and impact
- Meets USDA requirements for incidental food contact
- High Gloss
- Extremely hard, yet flexible.
- Excellent weather resistance
- Outstanding “wearing” properties.
- Easy to clean.
- Non-chalking and non-yellowing
- Apply up to 12 mils DFT in one coat (110 sq'/gallon)
E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F
From: $60.00- Outstanding durability with impact resistance of 160 in lb (Gardner Impact test)
- Cold temperature application down to 45°F
- Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive
- Excellent Chemical Resistance
- Aliphatic, UV Stable and will not yellow
- Easy to Use with Long 2-4 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Comes in wide Variety of Clear and 18 Different Colors
- Solvent Based - Excellent adhesion
E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interio...
From: $205.00- Great Interior & Exterior Horizontal Concrete & Steel Protection
- Exceptional Exterior Durability
- Excellent weather resistance
- Non-chalking and non-yellowing with excellent gloss and color retention
- Extremely tough, yet flexible
- A tile-like finish.
- Easy to clean
- Excellent chemical and stain resistance
- Highly resistant to abrasion and impact
- Outstanding wearing properties
- Handles up to 250°F Dry Service
- Long 4 hour POT life @ 75ºF
- Available in clear and 11 colors
E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta...
From: $70.00- Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test)
- Outstanding Chemical Resistance
- Excellent durability with impact resistance of 100 in lb (Gardner Impact test)
- Aliphatic, UV Stable and will not yellow
- Easy to Use one part with Long 3-5 Hour Pot Life
- Great for both Indoor and Outdoor Concrete Floor Projects
- Solvent Based With Excellent adhesion
E370P Hi-Gloss Hi Build Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Interior &#...
From: $118.00- Great Interior & Exterior Vertical Concrete & Steel Protection
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E374 Clear Satin Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls
$125.00- Great Interior & Exterior Vertical Concrete & Steel Protection and as topcoat for light to medium duty foot traffic only applications
- Exceptional Exterior Durability
- High solids
- Tile-like finish.
- Easy to clean
- Good chemical and stain resistance
- Highly resistant to abrasion and impact.
- Excellent gloss and color retention to UV exposure
- Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587
- Outstanding wearing properties.
- Non-chalking and non-yellowing
- High film build
- Handles up to 300°F Dry Service
- Long 4-6 hour POT life @ 75ºF
- Available in clear and 21 colors
E5030CL Urethane Clear Sealer / Topcoat WB
From: $55.00- Attractive, clear aliphatic non yellowing finish
- Versatile product good on concrete and masonry surfaces
- Recoat only 1-2 hours & light foot traffic 2-4 hours
- Extended 24 hour pot life
- Excellent abrasion resistance (Taber Abrasor test only 10 mg loss)
- High Gloss (>80 at 60 degrees)
- Flexible (120% Elongation at break)
- Water based
E669 Clear Acrylic Lacquer High Gloss Sealer | Concrete | Brick | Wood | Solvent Based | Outstanding...
From: $55.00- Non-yellowing, high gloss. properties.
- Excellent penetration and high “wetting out”
- Excellent adhesion to concrete.
- Great for Concrete, Masonry & Wood Surfaces
- Good UV resistance.
- Good water and salt chemical resistance.
- Good stain resistance.
- Prevents “dusting” by increasing strength of concrete
- Ideal as dustproofing sealer.
- Very fast dry time.
EXPERT Clear Wood Stain & Seal | Oil Based Deep Penetrating | Great For Hardwoods |Extreme Cli...
From: $65.00- Clear Protection
- Deep Penetrating Oil Through Entire Wood For Exceptional Protection
- Prevents Drying Out which causes warping and cracking
- Non-Film Forming Won't chip, crack or peel
- Mildew & UV Resistant - Maintains Color
- Water Shedding
- Extreme Climate Can Apply -10°F to 110°F
- Ultra Low VOC < 7 g/L
- Rain-safe soon as 1 hour after applied to fences
- Easy one coat application
- Easy Maintenance - Recoat without stripping, sanding or scraping
Gloss Sealer For Masonry and Wood | Premium Grade Acrylic
From: $45.00- Premium Grade Sealer and Water Repellent Offering a Nice Glossy Look
- For Concrete, Masonry, Brick, Wood
- Use on Painted or Unpainted Surfaces
- Adds Stain Resistance for Easier Cleanup
- Clear Finish Will Not Yellow
- To 5 Year Satisfaction Guarantee
- Eco-Friendly and Easy To Apply
H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Low Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat
From: $89.00- Tough, Durable Concrete Floor Sealer
- Topcoat for Epoxy Floor Coatings
- Excellent Chemical and Abrasion Resistance
- Exceptional Impact Resistance
- Aliphatic, UV Stable and Will Not Yellow
- Beautiful Clear, Semi Gloss Appearance
- Designed for High Traffic and Industrial Areas
- Water Based, Low voc <10 g/L
Plugger 10 Clear Masonry & Wood Acrylic Flat Sealer
From: $46.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 3 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Plugger 25 Clear Masonry & Wood Acrylic Flat Sealer
From: $51.00- Flat Sheen Acrylic Water Sealer
- Clear, Will Not Yellow
- Protect With Little Change in Appearance
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | ...
From: $68.00- UV Resistant Will Not Yellow
- Zero VOC- SCAQMD Compliant
- Choice of High Gloss, Satin, Matte or Super Matte (nearly flat) Finish
- Clear & White Color
- Excellent Adhesion
- Outstanding Chemical Resistance
- MEK Double rub @50% solids Passed 2,000 Cycles Test
- For Concrete, Brick, Wood, Metal, Tile (glazed & unglazed)
Satin-Lok Wet Look High Gloss Acrylic Sealer
From: $61.00- High Gloss Wet Look Acrylic Water Sealer
- UV Resistant Will Not Yellow
- 5 Year Warranty
- Water Base, Low VOC, Eco-Friendly
- Professional Grade
- Painted & Unpainted Concrete, Masonry, Wood
Wet Look High Gloss Acrylic Sealer For Wood & Masonry
From: $47.00- High Gloss "Wet Look" Acrylic Sealer
- Beautiful Appearance
- Interior and Exterior Surfaces
- For Concrete, Masonry, Brick, Stone, Wood
- Breathable Coating
- UV Resistant Will Not Yellow and Eco-Friendly
Copyright 2024 by Exterior Performance Coatings LLC