Floor Coating Systems
Filter By Category
Questions about our products?
Call us for help picking the correct solution for your project. (630) 675-4509
Showing 151–168 of 168 results
-
Bio-Chem E330 High Performance Epoxy | 100% Solids | Aggressive Chemical Exposures | High Heat
- Down-Hole Tubular Coating: Id and OD coating, especially suitable for "Ruffcoat" OD treatment
- Tank Lining: High hydrocarbon chemical resistance and early return to service make Bio-Chem E330 an ideal high build tank lining
- Hopper Car Lining: excellent physical and chemical resistance properties
- Concrete Containment: Excellent physical and chemical resistance properties
-
E1875 Epoxy Resin | Chemical Resistance | 100% Solids
- Excellent resistance to acids, alkalis, salts, most industrial chemicals and many solvents
- For Use in tough corrosive chemical environments including 70% Sulfuric Acid, 37% HCL and 50% Sodium Hydroxide
- Extremely tough with high wearing properties
- Excellent abrasion and impact resistance
- Good adhesion to concrete
-
E398 High Build Acrylic Polyurethane | High Gloss
- Excellent weather resistance
- High Solids
- Low VOC
- Good chemical and stain resistance
- Excellent gloss and color retention
-
8090 Mat Grounding Cord for ESD Floor Mats
- 10' coated high - strength tensile wire
- 10mm male stud connection to mats
- Ring-style termination for connecting to ground point
- 1 Met ohm resistor
-
Heel Grounders for ESD Floor Protection
- Compliant with ANSI/ESD S97.2, ESD SP9.2, ANSI/ESD S20.20, IEC 61340-5-1
- Two layer heel rubber
- Black conductive exterior – 10e4 ohms
- White insulative interior prevents carbon marking on shoes
- 1 meg ohm resistor
-
Pebble Bond Epoxy | Used with River Rock Flooring
- Use with our River Rock Pebbles
- Eco-Friendly Damage: reduces runoff and supports sustainability
- Reduced Flooding: prevents pooling and drainage strain
- Permeable Design: Filters water into the ground
- Slip Resistant: Perfect for wet or high-traffic areas
-
Bio-Dur E563 Epoxy Coating for Above Or Below Water Application | Heavy Duty | Quick Curing | Solvent Free
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water
- Marine and Offshore: heavy duty repair and sealing compound in wet environments
- Repair Compound: patching, leak sealing, etc. above and below water on steel and concrete substrates
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Staticide ESD Mat Cleaner | Static Dissipative Neutral Cleaner | No Alkali or Ammonia
- Maintains the original resistivity of anti-static mats
- Works with our selection of Anti-Static Mats
- Cleans, rejuvenates and extends the life of the ESD mats
- Contains no alkali, ammonia or isopropyl alcohol
- No GHS classification, no REACH or RoHS SVHC
-
Staticide Heavy Duty Low Lint Wipes
- 12" x 13" 1/4 fold, available in white and blue
- Use in conjunction with our Staticide ESD Mat Cleaner
- Hydroentangled 55% Cellulose/45% Polyester nonwoven wipe
- Suitable for ISO Class 6+ (Class 1000) cleanroom environments
- Binder-free; no chemical residue
-
River Rock Pebbles | Used with Pebble Bond Epoxy
- Use with our Pebble Bond Epoxy
- Eco-Friendly Damage: reduces runoff and supports sustainability
- Reduced Flooding: prevents pooling and drainage strain
- Permeable Design: Filters water into the ground
- Slip Resistant: Perfect for wet or high-traffic areas
-
Bio-Dur E3050 Novolac Epoxy | High Temperature | Wet or Dry Surface Ap
- Encapsulating Coating: Smooth, dense, easily decontaminated coating for steel and concrete
- High Heat, Anti-Abrasion Coating: High Tg coating with hard, abrasion-resistant pigmentation
- Tank and Pipeline Liner: Chemical Resistance and high hardness create durable corrosion protective barrier
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste
-
Metallic Epoxy Color Pigment | Marbled 3-D Look | Pearlescent | Translucent 4oz (113g)
- Showcase the "WOW" Factor with Unlimited Design Options in a decorative marbled look or unique artistic expression
- 50 metallic & pearlescent UV Resistant colors to choose from
- Recreate a marble, quartz or granite looking decorative surface at a small fraction of the cost per square foot
- Offers exceptionally tough, durable, long lasting coating system (40 - 45 mils thick vs one coat of household paint averaging <2 mils thick)
- Good for both foot traffic and vehicular applications
-
Bio-Gard E251 Heavy Duty Epoxy Coating | Dry or Damp Surfaces | VOC Free | 100% Solids | Air Shippable
- Anticorrosive Coating: Splash zone, excellent abrasion resistance above or below water. Anticorrosive barrier for in-service fuel storage tank interiors and roofs.
- Industrial Maintenance: General purpose chemical resistant lining for waste neutralization pits, secondary containment,etc. Makes an excellent floor and stair coating when used with entrained or broadcast grit.
- Wastewater: Reinforces, smooths and protects concrete exposed to chemical or municipal waste. Especially useful as the final gloss coating rebuilt with other TFT products
- 100% Solids
- Ships Non-Hazardous
-
E1850 Epoxy Floor Coating | 100% Solids | High Gloss | Abrasion Resistant | Long 30-40 Min Work Time | High Build To 60 Mils DFT One Coat
- Easy to Use With Long to 40 Min Work Time
- 100% solids
- Extremely high gloss, tile-like finish
- Outstanding wear and abrasion resistance
- Good resistance to blushing
-
Pebble Bond Reseal Epoxy | River Rock & Pebble Floor Resealer
- Restores original gloss and appearance of River Rock flooring
- Helps lock loose stones back in place
- Extends the life of River Rock and Pebble Flooring
- Excellent adhesion to existing Pebble Bond Surfaces
- Approximately 150 sq ft of coverage per gallon
-
Pebble Bond Trowel Slick | Surface Lubricant for River Rock & Pebble Flooring
- Reduces drag for smoother troweling
- Helps prevent epoxy from sticking to trowel
- Creates a more uniform pebble finish
- Improves control during installation
- Easy to use for DIY & professional applications
-
ABC Primer 914 | Quick Cure Epoxy Primer | 30-Minute Recoat
- 30-Minute Quick Cure – Cures quickly to allow overcoating in approximately 30 minutes, helping reduce project downtime.
- Excellent Adhesion – Creates a tacky bonding surface that improves adhesion for FRP systems and non-self-priming coatings.
- Low-Viscosity Formula – Applies smoothly by brush or roller for fast, uniform coverage.
- Solvent-Free Epoxy – 100% solids, VOC-free epoxy formulation designed for industrial repair and maintenance applications.
- Improves Composite Bond Strength – Promotes a strong bond between the substrate and fiberglass reinforced plastic (FRP) composite systems.
-
4″ x 18″ Pebble Bond Hand Trowel | Professional River Rock Finishing Tool
- Professional 4" x 18" steel finishing blade
- Comfortable wooden handle for improved grip and control
- Ideal for Pebble Bond epoxy and river rock installations
- Helps create a smooth, consistent stone finish
- Recommended for use with Pebble Bond Trowel Slick