Blok-lok With Graffiti Control: Graffiti Protection & Moisture Resistance
Rainguard Blok-lok With Graffiti Control Saves Time & Money. It’s an economical, low cost water-based, silane siloxane anti-graffiti coating and water repellent in one product for unpainted porous vertical surfaces. Apply 2 coats and you’re done. It combines high-quality penetrating chemical solids with an acrylic surface treatment component to provide a clear, deep-penetrating, and non-film-forming chemically-reactive water repellent and graffiti barrier. It’s designed to withstand multiple graffiti removals without having to re-apply and yet protect against damage from wind driven rain. Contains no silicone oils, paraffin wax or urethane.
Bloklok With Graffiti Control works on a wide variety of unpainted concrete, block, brick, stucco, masonry and wood porous surfaces. Blok-Lok with Graffiti Control with MICRO-LOK penetrates deep into porous surfaces to provide long-lasting and virtually indestructible water-repellent protection that creates a micro-molecular chemical and mechanical bond between the water-repellent chemicals and the substrate. It is not affected by sunlight and will not yellow. The acrylic surface component makes graffiti easy to remove with Rainguard’s VandlClean Graffiti Remover.
Bloklok With Graffiti Control is available in both ready-to-use 1 gallon and 5 gallon containers and money saving 32 oz concentrate (makes 5 gallons after adding water) and 1 gallon concentrate (makes 10 gallons after adding water). For additional savings consider a case of concentrate.
Where is Blok-lok with Graffiti Control used?
- Construction & Remodel Projects: Exterior building|screen|retaining walls, fences, highway sound barriers, bridge abutments
- Homeowner projects: Fences, exterior walls
Why Blok-lok with Graffiti Control?
- Material warranty to 10 years for water repellency and 2 years for graffiti protection
- Clear, Flat Sheen, non-yellowing formula – Almost no change in look of the building
- Easy to apply with hand pump or garden sprayer
- Low cost application – single component, no mixing, no POT life issues, unlimited recoat window
- Retards growth of mildew and mold
- Save labor costs with combined water repellent & graffiti protection, apply 2 coats – 1 hr dry time
- 100% Eco-friendly: with low
- Specified by architects in CSI 07190, 099623, 099625, 099650