ACL Staticide’s ESD Conductive Floor Runners are made in the USA from an engineered PVC with inherent electrical properties that will last the lifetime of the material, meeting ANSI/ESD S20.20 guidelines for sensitive device manufacturing. Great protection for your floor against scratches and scuff marks. With its smooth surface it allows castor chairs to easily roll across.
The homogeneous distribution of carbon black and proprietary polymers give the conductive vinyl floor runners a continuous and permanent path to ground. Electrical properties will not wear due to damage caused by chair casters, so the conductive circuit remains continuous while guarding against scratching and scuff marks.
Runner 48″ wide x 75′ long can be used for long workbench areas, aisleways or can be cut to size with a utility knife. These mats are laser cut and can be punched if one chooses to add a grounding snap. Grounding snap added upon request (put request in NOTES SECTION on the CHECKOUT PAGE.
To keep clean and avoid insulative electrical readings, use a neutral cleaner such as our 4020 Concentrate Neutral Cleaner concentrate or 4030 Neutral Cleaner ready-to-use formula. The low alcohol, high surfactant formula will clean deeply without damaging the structural integrity of the conductive material.
